Updated on 2024/06/04

写真a

 
MORINAGA Eiji
 
Organization
Graduate School of Informatics Department of Interdisciplinary Informatics Associate Professor
College of Sustainable System Sciences Department of Knowledge and Information Systems
Title
Associate Professor
Affiliation
Institute of Informatics
Affiliation campus
Nakamozu Campus

Position

  • Graduate School of Informatics Department of Interdisciplinary Informatics 

    Associate Professor  2022.04 - Now

  • College of Sustainable System Sciences Department of Knowledge and Information Systems 

    Associate Professor  2022.04 - Now

Degree

  • 博士(工学) ( Osaka University )

  • 修士(工学) ( Osaka University )

  • 学士(工学) ( Osaka University )

Research Areas

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Design engineering

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Control and system engineering

Professional Memberships

▼display all

Committee Memberships (off-campus)

  • 生産システム部門運営委員会 広報委員長   日本機械学会  

    2024.04 - Now 

  • 代議員   日本機械学会  

    2024.04 - Now 

  • 生産システム部門運営委員   日本機械学会  

    2024.04 - Now 

  • 設計工学・システム 部門運営委員会 技術委員   日本機械学会  

    2024.04 - Now 

  • International Scientific Committee Member   2024 International Conference on Industry 4.0 and Smart Manufacturing  

    2024.03 - Now 

  • 第34回設計工学・システム部門講演会 実行委員   日本機械学会  

    2024.01 - Now 

  • Program Committee Member, International Symposium on Flexible Automation 2024   The American Society of Mechanical Engineers; The Institute of Systems, Control and Information Engineers  

    2023.12 - Now 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor-in-Chief of a special issue   The Japan Society of Mechanical Engineers  

    2023.12 - Now 

      More details

    Editor-in-Chief of the special issue on "Design, Concurrent Engineering and Smart Manufacturing in the Era of VUCA"

  • Chief Organizer of Technical Track, International Symposium on Flexible Automation 2024   The American Society of Mechanical Engineers; The Institute of Systems, Control and Information Engineers  

    2023.12 - Now 

  • 第68回システム制御情報学会研究発表講演会実行委員   システム制御情報学会  

    2023.10 - 2024.05 

  • 委員   AI活用型システム創成委員会  

    2023.10 - 2024.03 

  • International Scientific Committee Member   2023 International Conference on Industry 4.0 and Smart Manufacturing  

    2023.05 - 2023.11 

  • Program Committee Chair of JSME iDECON/MS 2023   The Japan Society of Mechanical Engineers  

    2023.05 - 2023.09 

  • Steering Committee Member of JSME iDECON/MS 2023   The Japan Society of Mechanical Engineers  

    2023.05 - 2023.09 

  • Organizing Committee Member of JSME iDECON/MS 2023   The Japan Society of Mechanical Engineers  

    2023.05 - 2023.09 

  • スケジューリング・シンポジウム2023実行委員   スケジューリング学会  

    2023.03 - 2023.09 

  • Program Committee Member, International Symposium on Scheduling 2023   Scheduling Society of Japan  

    2022.09 - 2023.06 

  • MES2022組織委員会実行委員   (一社)エレクトロニクス実装学会  

    2022.08 - 2022.12 

  • 事業委員   システム制御情報学会  

    2022.06 - 2024.05 

  • 第32回設計工学・システム部門講演会 実行委員   日本機械学会  

    2022.05 - 2022.09 

  • Program Committee Member, International Symposium on Flexible Automation 2022   The Institute of Systems, Control and Information Engineers; The American Society of Mechanical Engineers  

    2021.12 - 2022.07 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor-in-Chief of a special issue   The Japan Society of Mechanical Engineers  

    2021.06 - 2022.10 

      More details

    Editor-in-Chief of the special issue on "Design, Concurrent Engineering and Smart Manufacturing towards Highly Digitalized Society"

  • 運営委員   システム制御情報学会 サイバーフィジカル・フレキシブル・オートメーション研究分科会  

    2021.04 - Now 

  • 設計工学・システム部門拡大運営委員   日本機械学会  

    2021.04 - Now 

  • 設計工学・システム 部門運営委員会 企画活動活性化委員   日本機械学会  

    2021.04 - Now 

  • 生産システム部門運営委員会 広報委員長   日本機械学会  

    2021.04 - 2022.03 

  • Steering Committee Member of iDECON/MS 2021   The Japan Society of Mechanical Engineers  

    2021.04 - 2021.09 

  • Program Co-chair of iDECON/MS 2021   The Japan Society of Mechanical Engineers  

    2021.04 - 2021.09 

  • Organizing Committee Member of iDECON/MS 2021   The Japan Society of Mechanical Engineers  

    2021.04 - 2021.09 

  • MES2021組織委員会実行委員   (一社)エレクトロニクス実装学会  

    2021.03 - 2021.09 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2021.01 - 2022.10 

      More details

    Editor of the special issue on "Advanced Production Scheduling"

  • 日本機械学会論文集特集号アソシエイトエディター   一般社団法人 日本機械学会  

    2021.01 - 2022.04 

      More details

    特集号「高次元の柔軟性と即応力を具備する生産システムを目指して」 アソシエイトエディター

  • Program Committee Member, International Symposium on Scheduling 2021   Scheduling Society of Japan  

    2020.12 - 2021.06 

  • 委員   精密工学会 総合生産システム専門委員会  

    2020.06 - Now 

  • スケジューリング・シンポジウム2021実行委員   スケジューリング学会  

    2020.04 - 2021.09 

  • MES2020組織委員会実行委員   (一社)エレクトロニクス実装学会  

    2020.02 - 2020.09 

  • 日本機械学会論文集特集号アソシエイトエディター   一般社団法人 日本機械学会  

    2019.12 - 2022.04 

      More details

    特集号「ものづくりの革新的な高スループット体質化と新たな社会価値創造を目指して」 アソシエイトエディター

  • 第64回システム制御情報学会研究発表講演会実行委員   システム制御情報学会  

    2019.10 - 2020.05 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2019.09 - 2021.03 

      More details

    Editor of the special issue on "Design, Concurrent Engineering and Sustainable Manufacturing for Connected Industry"

  • 第30回設計工学・システム部門講演会 実行委員   日本機械学会  

    2019.09 - 2020.09 

  • Program Committee Member, International Symposium on Flexible Automation 2020   The American Society of Mechanical Engineers; The Institute of Systems, Control and Information Engineers  

    2019.08 - 2020.07 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2019.06 - 2020.07 

      More details

    Editor of the special issue on "Advanced Production Scheduling"

  • 生産システム部門 幹事   日本機械学会  

    2019.04 - 2021.03 

  • 生産システム部門運営委員会 表彰委員長   日本機械学会  

    2019.04 - 2020.03 

  • Mate2020実行委員会総務副委員長   スマートプロセス学会エレクトロニクス生産科学部会;溶接学会マイクロ接合研究委員会  

    2019.04 - 2020.01 

  • 2020年度秋季全国大会 実行委員   溶接学会  

    2019.03 - 2020.03 

  • 日本機械学会論文集特集号アソシエイトエディター   一般社団法人 日本機械学会  

    2019.01 - 2020.04 

      More details

    特集号「超スマート社会における価値共創型のモノづくりを目指して」 アソシエイトエディター

  • MES2019組織委員会副実行委員長   (一社)エレクトロニクス実装学会  

    2018.10 - 2019.09 

  • 電子情報通信学会との連携検討WG委員   日本機械学会  

    2018.08 - 2021.03 

  • 幹事   スマートプロセス学会 エレクトロニクス生産科学部会 電子デバイス実装研究委員会  

    2018.04 - 2024.03 

  • 生産システム部門研究発表講演会2019プログラム委員長   日本機械学会 生産システム部門  

    2018.04 - 2019.03 

  • Mate2019実行委員会総務副委員長   スマートプロセス学会エレクトロニクス生産科学部会;溶接学会マイクロ接合研究委員会  

    2018.04 - 2019.01 

  • MES2018組織委員会副実行委員長   (一社)エレクトロニクス実装学会  

    2018.01 - 2018.09 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2017.09 - 2018.10 

      More details

    Editor of the special issue on "Design and Concurrent Engineering Challenges for Sustainable Smart Manufacturing"

  • Program Committee Member, International Symposium on Flexible Automation 2018   The Institute of Systems, Control and Information Engineers; The American Society of Mechanical Engineers  

    2017.08 - 2018.07 

  • Executive Committee Member, International Symposium on Flexible Automation 2018   The Institute of Systems, Control and Information Engineers; The American Society of Mechanical Engineers  

    2017.08 - 2018.07 

  • 生産システム部門運営委員   日本機械学会  

    2017.04 - 2019.03 

  • 代議員   日本機械学会  

    2017.04 - 2019.03 

  • Mate2018実行委員会総務副委員長   スマートプロセス学会エレクトロニクス生産科学部会;溶接学会マイクロ接合研究委員会  

    2017.04 - 2018.01 

  • 運営委員   システム制御情報学会 スマート・フレキシブル・オートメーション研究分科会  

    2016.04 - 2021.03 

  • Mate2017実行委員会総務副委員長   スマートプロセス学会エレクトロニクス生産科学部会;溶接学会マイクロ接合研究委員会  

    2016.04 - 2017.02 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2015.09 - 2016.10 

      More details

    Editor of the special issue on "Design, Concurrent Engineering, and Manufacturing in a Global Collaboration Era"

  • Program Committee Member, International Symposium on Flexible Automation 2016   The American Society of Mechanical Engineers; The Institute of Systems, Control and Information Engineers  

    2015.08 - 2016.08 

  • 生産システム部門運営委員会 広報委員長   日本機械学会  

    2015.04 - 2016.03 

  • 日本機械学会論文集特集号ゲストアソシエイトエディター   一般社団法人 日本機械学会  

    2014.10 - 2015.05 

      More details

    「製造革新を支える生産システム」特集号 ゲストアソシエイトエディター

  • 幹事   精密工学会 生産・経営知識学専門委員会  

    2014.06 - 2018.05 

  • Associate Editor, Journal of Advanced Mechanical Design, Systems, and Manufacturing   The Japan Society of Mechanical Engineers  

    2014.04 - 2024.03 

  • ミッションフェロー   エレクトロニクス実装学会  

    2014.03 - 2020.02 

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing, Editor of a special issue   The Japan Society of Mechanical Engineers  

    2013.11 - 2014.10 

      More details

    Editor of the special issue on "Advanced Production Scheduling"

  • 日本機械学会論文集特集号アソシエイトエディター   一般社団法人 日本機械学会  

    2013.09 - 2014.06 

      More details

    "生産システムの新展開"特集号 アソシエイトエディター

  • 専門調査員   文部科学省 科学技術動向センター  

    2013.04 - 2020.03 

  • Program Committee Member, International Symposium on Flexible Automation 2014   The Institute of Systems, Control and Information Engineers; The American Society of Mechanical Engineers  

    2013.02 - 2014.07 

  • 委員   精密工学会 生産・経営知識学専門委員会  

    2012.06 - Now 

  • 生産システム部門運営委員   日本機械学会  

    2012.04 - 2016.03 

  • 代議員   日本機械学会  

    2012.04 - 2016.03 

  • 運営委員   溶接学会 若手会員の会  

    2012.03 - 2018.02 

  • Program Committee Member, International Symposium on Flexible Automation 2012   The American Society of Mechanical Engineers; The Institute of Systems, Control and Information Engineers  

    2011.06 - 2012.07 

  • 運営委員   システム制御情報学会 サステナブル・フレキシブル・オートメーション研究分科会  

    2011.04 - 2016.03 

  • 第三分科会主査   日本学術振興会 産学協力研究委員会 システムデザイン・インテグレーション第177委員会  

    2010.10 - 2015.03 

  • 運営委員   日本学術振興会 産学協力研究委員会 システムデザイン・インテグレーション第177委員会  

    2010.04 - 2020.03 

  • 運営委員   日本機械学会 設計工学・システム部門 関西設計工学研究会  

    2009.02 - 2021.03 

  • 委員   日本学術振興会 産学協力研究委員会 システムデザイン・インテグレーション第177委員会  

    2007.04 - 2020.03 

  • 運営委員   システム制御情報学会 ユビキタス時代のフレキシブル・オートメーション研究分科会  

    2007.04 - 2011.03 

▼display all

Awards

  • Certificate of Merit for Outstanding Contribution to Manufacturing Systems Division

    2022.03   The Japan Society of Mechanical Engineers, Manufacturing Systems Division  

     More details

    Country:Japan

  • 論文賞

    2021.11   (一社)スマートプロセス学会  

     More details

    Country:Japan

  • 論文賞

    2020.12   (一財)FA財団  

     More details

    Country:Japan

  • Recognition for Outstanding Contribution

    2019.09   JSME International Conference on Design and Concurrent Engineering 2019 / Manufacturing Systems Conference 2019  

     More details

    Country:Japan

  • 学術賞「論文賞」

    2018.06   (一社)日本繊維機械学会  

     More details

    Country:Japan

  • ベストオーガナイザー賞

    2018.03   2018年度精密工学会春季大会学術講演会  

     More details

    Country:Japan

  • 学術賞「論文賞」

    2015.06   (一社)日本繊維機械学会  

     More details

    Country:Japan

  • Certificate of Merit for Excellent Conference Paper in Manufacturing Systems

    2014.03   The Japan Society of Mechanical Engineers, Manufacturing Systems Division  

     More details

    Country:Japan

  • ベストプレゼンテーション賞

    2012.09   2012年度精密工学会秋季大会学術講演会  

     More details

    Country:Japan

  • Young Investigator Award in Flexible Automation

    2012.06   ASME/ISCIE International Symposium on Flexible Automation 2012  

     More details

    Country:United States

  • Best Paper Award of ICEP 2010

    2011.04   The Japan Institute of Electronics Packaging / The Institute of Electrical and Electronics Engineers CPMT Society Japan Chapter  

     More details

    Country:Japan

  • Shimemura Young Author Prize

    2002.09   The 4th Asian Control Conference  

     More details

    Country:Singapore

▼display all

Papers

  • A Basic Study on Supporting Idea Generation about Product Needs Using Natural Language Processing Techniques

    Eiji Morinaga, Yuho Takano

    Proceedings of the 68th Annual Conference on the Institute of Systems, Control and Information Engineers   277 - 280   2024.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

  • Improvement of job shop scheduling method based on mathematical optimization and machine learning Reviewed

    Eiji Morinaga, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    Procedia Computer Science   232C   871 - 879   2024.03

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: 10.1016/j.procs.2024.01.087

  • Enhanced Integrated Method of Distributed Scheduling and Simulation for Highly-Distributed Flexible Job Shops Invited Reviewed

    Eiji Morinaga, Daiki Yasuda, Hidefumi Wakamatsu

    Journal of Smart Processing for Materials, Environment & Energy   12 ( 6 )   326 - 335   2023.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.7791/jspmee.12.326

  • Cause Prediction of Product Defects Using Event Causality Invited Reviewed

    Hidefumi Wakamatsu, Itsuki Hatano, Eiji Morinaga, Yoshiharu Iwata

    Journal of Smart Processing for Materials, Environment & Energy   12 ( 6 )   314 - 325   2023.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.7791/jspmee.12.314

  • An Improved Method of Job Shop Scheduling Considering Reworking and Reprocessing based on Proactive Approach Reviewed

    Eiji Morinaga, Kenta Teramoto, Hidefumi Wakamatsu

    Advances in Production Management Systems. Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures.   576 - 590   2023.09

     More details

    Authorship:Lead author, Corresponding author   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-031-43670-3_40

  • A Study on Sophisticated Production Management for Engineer-to-Order Production---A Load Planning Method Based on Integer Programming Problem for Long-Term Production Plan

    Yoshiyuki Hirahara, Masamitsu Fukuda, Ayumu Niinuma, Hirotomo Oshima, Yasuo Namioka, Koji Iwamura, Eiji Morinaga

    90 - 93   2023.09

     More details

    Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

  • A Study on Sophisticated Production Management for Engineer-to-Order Production (A Mixed Integer Programming Formulation of Scheduling Problems)

    Eiji Morinaga, Koji Iwamura, Yoshiyuki Hirahara, Masamitsu Fukuda, Ayumu Niinuma, Hirotomo Oshima, Yasuo Namioka

    S141-01   2023.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

  • Method for Supporting Decision-Making in Rescheduling for Lean Flexible Manufacturing Reviewed

    Eiji Morinaga, Daiki Yasuda, Hidefumi Wakamatsu

    Transactions of the Institute of Systems, Control and Information Engineers   36 ( 8 )   271 - 278   2023.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   International / domestic magazine:Domestic journal  

    DOI: 10.5687/iscie.36.271

  • A Basic Study on Supporting Idea Generation for Product Needs by Natural Language Processing

    Eiji Morinaga, Kei Imai, Erii Todo

    Proceedings of the 67th Annual Conference on the Institute of Systems, Control and Information Engineers   405 - 407   2023.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

  • ソーシャルネットワーキングサービスを活用した製品の使い方の発想支援に関する基礎検討

    森永英二、東藤絵梨衣、今井啓

    2023年度精密工学会春季大会学術講演会講演論文集   23 - 24   2023.03

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

    DOI: 10.11522/pscjspe.2023s.0_23

  • An improved method of job shop scheduling using machine learning and mathematical optimization Reviewed

    Eiji Morinaga, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    Procedia Computer Science   217C   1479 - 1486   2023.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: doi.org/10.1016/j.procs.2022.12.347

  • Method of job shop scheduling considering reworking and reprocessing based on proactive approach Reviewed

    Eiji Morinaga, Kenta Teramoto, Hidefumi Wakamatsu

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   17 ( 1 )   JAMDSM0013   2023.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1299/jamdsm.2023jamdsm0013

  • A Study on sophisticated production management for engineer-to-order production

    Yoshiyuki Hirahara, Takehiro Kato, Masamitsu Fukuda, Hirotomo Oshima, Yasuo Namioka, Koji Iwamura, Eiji Morinaga

    Proceedings of the 65th Japan Joint Automatic Control Conference   1156 - 1158   2022.11

     More details

    Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

    DOI: 10.11511/jacc.65.0_1156

  • Demand Forecasting and Inventory Simulation Based on VAR Model Using POS Data of Breads in Supermarkets Reviewed

    Koji Iwamura, Itsuki Doe, Nobuhiro Sugimura, Eiji Morinaga, Naoki Hirabayashi, Yasuhiro Kinoshita, Kazunuki Kimura

    Proceedings of the 19th International Conference on Precision Engineering   C197   2022.11

     More details

    Publishing type:Research paper (international conference proceedings)   International / domestic magazine:International journal  

  • An Improved Method of Job-Shop Scheduling through Integration of Machine Learning and Mathematical Programming

    Xuetian Tang, Eiji Morinaga

    S142-04   2022.09

     More details

    Authorship:Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   International / domestic magazine:Domestic journal  

  • A Method of Decision-Making Support for Flexible Operation and Management of Highly-Distributed Manufacturing Systems Reviewed

    Eiji Morinaga, Daiki Yasuda, Hidefumi Wakamatsu

    Proceedings of the 2022 International Symposium on Flexible Automation   406 - 411   2022.07

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   International / domestic magazine:International journal  

    DOI: 10.11509/isfa.2022.406

  • A Method of Proactive Job Shop Scheduling Considering Reworking and Reprocessing Reviewed

    Eiji Morinaga, Kenta Teramoto, Hidefumi Wakamatsu

    Proceedings of the 10th International Conference on Leading Edge Manufacturing Technologies in the 21st Century   677 - 681   2021.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1299/jsmelem.2021.10.138-178

  • Route Design of a String for a Tying Tool to Bind Wire Harness for Airplanes Reviewed

    Yuma Ishihara, Hidefumi Wakamatsu, Eiji Morinaga

    Journal of Smart Processing for Materials, Environment & Energy   10 ( 5 )   301 - 307   2021.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.7791/jspmee.10.301

  • A demand forecasting of lettuces in wholesale markets for trading markets of plant factories Reviewed

    Thinh Nguyen Quang, Shohei Kohama, Nobuhiro Sugimura, Rajesh Shrestha, Koji Iwamura, Eiji Morinaga, Naoki Hirabayashi

    Proceedings of the International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021   2021.08

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

  • A basic study on data-driven job shop scheduling Reviewed

    Eiji Morinaga, Naoki Otsuka, Hidefumi Wakamatsu, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    Proceedings of the International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021   2021.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

  • Design of developable surfaces using the given data points Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Seiichiro Tsutsumi, Takahiro Kubo

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   15 ( 5 )   2021.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1299/jamdsm.2021jamdsm0056

  • 3D Shape Prediction of a Paper Model of a Brassiere Cup toward Its Design Support --- 2nd Report: Application to a Three Piece Brassiere Cup --- Reviewed

    Kyosuke Shirai, Hidefumi Wakamatsu, Eiji Morinaga, Takahiro Kubo, Seiichiro Tsutsumi

    Journal of Textile Engineering   67 ( 3 )   41 - 56   2021.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.4188/jte.67.41

  • Integration of Sequencing and Part-Delivery Planning in Mixed-Model Production Invited

    Eiji Morinaga

    Proceedings of the 27th Symposium on "Microjoining and Assembly Technology in Electronics"   184 - 185   2021.02

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (conference, symposium, etc.)   Kind of work:Single Work   International / domestic magazine:Domestic journal  

  • Guide Part Design of a Tying Tool to Bind Wire Harness for Airplanes Reviewed

    Yuma Ishihara, Hidefumi Wakamatsu, Eiji Morinaga

    Proceedings of the 27th Symposium on "Microjoining and Assembly Technology in Electronics"   196 - 201   2021.02

     More details

    Kind of work:Joint Work  

  • Deformation Simulation of Shield Braid of Electric Wire Reviewed

    Hidefumi Wakamatsu, Shuhei Narita, Eiji Morinaga

    Proceedings of the 27th Symposium on "Microjoining and Assembly Technology in Electronics"   186 - 189   2021.02

     More details

    Kind of work:Joint Work  

  • Design support of a developable surface considering its bending energy Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Takahiro Kubo

    Transactions of the JSME (in Japanese)   86 ( 891 )   20 - 00169   2020.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.1299/transjsme.20-00169

  • Behavior modeling for product design support focusing on topological information of components Reviewed

    Itsuki Hatano, Eiji Morinaga, Hidefumi Wakamatsu

    Transactions of the JSME (in Japanese)   86 ( 891 )   20 - 00160   2020.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.1299/transjsme.20-00160

  • Efficient Method for Solving Integrated Planning Problem of Sequence and Part Delivery in Mixed-Model Production Systems Reviewed

    Eiji Morinaga, Takumi Nakamura, Hidefumi Wakamatsu

    Journal of Smart Processing   9 ( 5 )   237 - 244   2020.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.7791/jspmee.9.237

  • A Basic Study on Job-Shop Scheduling Using Machine Learning Techniques

    Eiji Morinaga, Naoki Otsuka, Hidefumi Wakamatsu

    2020.09

  • A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops Reviewed

    Daiki Yasuda, Eiji Morinaga, Hidefumi Wakamatsu

    Advances in Production Management Systems. Towards Smart and Digital Manufacturing   485 - 492   2020.08

     More details

    Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-030-57997-5_56

  • Design of a Two-Piece Brassiere Cup From Its Data Points Toward Its Automation Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Takahiro Kubo

    Proceedings of International Symposium on Flexible Automation 2020   ISFA2020 - 9612   2020.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1115/ISFA2020-9612

  • Bending Simulation of a Shielding Braid Toward Its Lifespan Prediction Reviewed

    Shuhei Narita, Hidefumi Wakamatsu, Eiji Morinaga

    Proceedings of International Symposium on Flexible Automation 2020   ISFA2020 - 9613   2020.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1115/ISFA2020-9613

  • Behavior Modeling for Product Design Support Focusing on Topological Information of Components Reviewed

    Itsuki Hatano, Hidefumi Wakamatsu, Eiji Morinaga

    Proceedings of International Symposium on Flexible Automation 2020   ISFA2020 - 9614   2020.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1115/ISFA2020-9614

  • 3D Shape Prediction of a Paper Model for a Brassiere Cup Consisting of Multiple Polygonal Patterns Reviewed

    Hidefumi Wakamatsu, Kyosuke Shirai, Eiji Morinaga, Takahiro Kubo

    Proceedings of International Symposium on Flexible Automation 2020   ISFA2020 - 9624   2020.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1115/ISFA2020-9624

  • A Neighborhood Limitation Method for Job-Shop Scheduling Based on Simulated Annealing Reviewed

    Kenta Teramoto, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    Transactions of the Institute of Systems, Control and Information Engineers   33 ( 6 )   171 - 181   2020.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.5687/iscie.33.171

  • 外力による微小変形の生じたブラジャーカップの変形形状簡易予測手法

    吉田皓太郎、若松栄史、森永英二、久保貴裕

    日本繊維機械学会第73回年次大会研究発表論文集   76 - 77   2020.06

  • ブラジャーの設計支援のための型紙の三次元形状予測〜第三報:複雑なパターン形状に対する汎用性の拡張〜

    若松栄史、白井恭介、森永英二、久保貴裕

    日本繊維機械学会第73回年次大会研究発表論文集   72 - 73   2020.06

  • 組紐状構造物の屈曲挙動シミュレーション

    成田周平、若松栄史、森永英二

    日本繊維機械学会第73回年次大会研究発表論文集   74 - 75   2020.06

  • A Method to Design the Pattern Shape Satisfying Design Parameters of a Brassiere Cup Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Takahiro Kubo

    Proceedings of the 2020 IEEE/SICE International Symposium on System Integration   700 - 705   2020.01

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1109/SII46433.2020.9026302

  • Reduction of Computational Load in Robust Facility Layout Planning Considering Temporal Production Efficiency Reviewed

    Eiji Morinaga, Komei Iwasaki, Hidefumi Wakamatsu, Eiji Arai

    Advances in Production Management Systems. Towards Smart Production Management Systems., Part II   189 - 195   2019.08

     More details

    Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-030-29996-5_22

  • 3D Shape Prediction of a Paper Model of a Brassiere Cup toward Its Design Support --- 1st Report: Application to a Two Piece Brassiere Cup --- Reviewed

    Hidefumi Wakamatsu, Kotaro Yoshida, Eiji Morinaga, Eiji Arai, Takahiro Kubo

    Journal of Textile Engineering   65 ( 3 )   35 - 46   2019.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.4188/jte.65.35

  • Pattern Shape Optimization of a Two Piece Brassiere Cup to Improve Its Design Efficiency Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Seiichiro Tsutsumi, Takahiro Kubo

    Transactions of the Institute of Systems, Control and Information Engineers   32 ( 5 )   192 - 202   2019.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.5687/iscie.32.192

  • Fundamental Study on Modification Process of Design Plan for Computer-Aided Product Design Considering Ways of Usage Reviewed

    Eiji Morinaga, Hidefumi Wakamatsu, Yusuke Goto, Eiji Arai

    Journal of Advanced Manufacturing Technology   13 ( 1 )   95 - 107   2019.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

  • Development of a Tying Tool to Bind a Wire Harness ---Implementation of Tying a Clove Hitch--- Reviewed

    Azumi Muneta, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Journal of the Robotics Society of Japan   37 ( 1 )   73 - 80   2019.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.7210/jrsj.37.73

  • A Study on Highly-Distributed Manufacturing System Simulation Reviewed

    Eiji Morinaga, Daiki Yasuda, Yudai Imagawa, Hidefumi Wakamatsu, Akira Tsumaya, Tatsuo Inoue, Koji Iwamura, Motohiro Ishibashi, Nobutada Fujii, Eiji Arai, Susumu Fujii

    Procedia Manufacturing   39   50 - 57   2019

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1016/j.promfg.2020.01.227

  • Development of a Tying Tool to Bind a Wire Harness Reviewed

    Azumi Muneta, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of International Symposium on Flexible Automation 2018   242 - 247   2018.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.11509/isfa.2018.242

  • Design Support of Paper Patterns for Two Piece Brassiere Cup Reviewed

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of International Symposium on Flexible Automation 2018   444 - 450   2018.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.11509/isfa.2018.444

  • An Efficient Method of Job-Shop Scheduling Based on Simulated Annealing Reviewed

    Kenta Teramoto, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of International Symposium on Flexible Automation 2018   383 - 388   2018.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.11509/isfa.2018.383

  • Prediction of Ways of Usage of Products for Functional Verification in Product Design Reviewed

    Eiji Morinaga, Hidefumi Wakamatsu, Masachika Mega, Eiji Arai

    Journal of Smart Processing   7 ( 3 )   88 - 93   2018.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.7791/jspmee.7.88

  • Prediction of Skewness for Plain-Knitted Fabric Based on the Modeling of Knitted Structure Reviewed

    Yosuke Inui, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of 2017 IEEE/SICE International Symposium on System Integration   793 - 798   2017.12

     More details

    Kind of work:Joint Work  

  • Behavior Modeling Method for Functional Verification of Product Considering Ways of Usage Reviewed

    Eiji Morinaga, Hidefumi Wakamatsu, Hijiri Abiru, Eiji Arai

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   11 ( 5 )   2017.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1299/jamdsm.2017jamdsm0066

  • A Method for Flexible Job-Shop Scheduling Considering Workers and Teams Reviewed

    Eiji Morinaga, Yuki Sakaguchi, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century   2017.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1299/jsmelem.2017.9.126

  • A Method for Flexible Job-Shop Scheduling Using Genetic Algorithm Reviewed

    Eiji Morinaga, Yuki Sakaguchi, Hidefumi Wakamatsu, Eiji Arai

    Journal of Advanced Manufacturing Technology   11 ( 2 )   79 - 86   2017.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

  • Flexible Job-Shop Scheduling Method for Highly-Distributed Manufacturing Systems Reviewed

    Eiji Morinaga, Tomomi Nakamura, Hidefumi Wakamatsu, Eiji Arai

    Journal of Smart Processing   6 ( 5 )   181 - 187   2017.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.7791/jspmee.6.181

  • Failure detection of products with quantitative modeling of behavior of entities and cause-and-effect relationships among physical phenomena Reviewed

    Kazuki Akashi, Eiji Morinaga, Hidefumi Wakamatsu, Ryu Kurahashi, Eiji Arai

    Transactions of the JSME   83 ( 853 )   17 - 00084   2017.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.1299/transjsme.17-00084

  • Prediction of Wale Skew of A Plain Knitted Fabric Based on Estimation of Untwisting Torque by Modeling of Untwisting Behavior of A Twisted Yarn Reviewed

    Yosuke Inui, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Hiroyuki Yagi, Hideshige Mori, Tatsumori Matsumoto

    Journal of Textile Engineering   63 ( 3 )   71 - 80   2017.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.4188/jte.63.71

  • An Improved Computer-Aided Process Planning Method Considering Production Scheduling Reviewed

    Eiji Morinaga, Charoenlarpkul Nattapoom, Hidefumi Wakamatsu, Eiji Arai

    Advances in Production Management Systems; Production Management Initiatives for a Sustainable World   178 - 186   2017.03

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-319-51133-7_22

  • A Method of Flexible Job-Shop Scheduling for Highly-Distributed Manufacturing Systems Reviewed

    Eiji Morinaga, Tomomi Nakamura, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 24th International Conference on Production Research   592 - 597   2017

     More details

    Kind of work:Joint Work  

  • A Robust Facility Layout Planning Method Considering Temporal Efficiency Reviewed

    Eiji Morinaga, Komei Iwasaki, Hidefumi Wakamatsu, Eiji Arai

    Advances in Production Management Systems; The Path to Intelligent, Collaborative and Sustainable Manufacturing   168 - 175   2017

     More details

    Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: doi.org/10.1007/978-3-319-66926-7_20

  • A Quantitative Modeling Method of Behavior and Cause-and-effect Relationships among Physical Phenomena for Failure Detection Considering Ways of Use Reviewed

    Kazuki Akashi, Eiji Morinaga, Hidefumi Wakamatsu, Ryu Kurahashi, Eiji Arai

    Proceedings of Asia Design Engineering Workshop 2016   2016.12

     More details

    Kind of work:Joint Work  

  • A Unified Modeling Method of Behavior, Function Structure and Occurring Sequence of Functions Reviewed

    Ryu Kurahashi, Eiji Morinaga, Hidefumi Wakamatsu, Kazuki Akashi, Eiji Arai

    Proceedings of Asia Design Engineering Workshop 2016   2016.12

     More details

    Kind of work:Joint Work  

  • Functional Verification Method Considering Ways of Use for Design of Products with Sensors Reviewed

    Eiji Morinaga, Masachika Mega, Hidefumi Wakamatsu, Eiji Arai

    Transactions of the Institute of Systems, Control and Information Engineers   29 ( 10 )   441 - 447   2016.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.5687/iscie.29.441

  • Facility Layout Planning with Continuous Representation Considering Temporal Efficiency Reviewed

    Eiji Morinaga, Yutaro Shintome, Hidefumi Wakamatsu, Eiji Arai

    Transactions of the Institute of Systems, Control and Information Engineers   29 ( 9 )   408 - 413   2016.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.5687/iscie.29.408

  • A Facility Layout Planning Method Considering Routing and Temporal Efficiency Reviewed

    Eiji Morinaga, Komei Iwasaki, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of 2016 International Symposium on Flexible Automation   193 - 198   2016.07

     More details

    Kind of work:Joint Work  

  • 3D Shape Prediction of a Paper Model of a Two Piece Brassiere Cup for Its Efficient Design Reviewed

    Hidefumi Wakamatsu, Yasunori Ryu, Eiji Morinaga, Eiji Arai, Takahiro Kubo, Makoto Oyama, Taizou Kishimoto

    Proceedings of 2016 International Symposium on Flexible Automation   326 - 332   2016.07

     More details

    Kind of work:Joint Work  

  • A Behavior Modeling Method for Functional Verification of Product Considering Ways of Use Reviewed

    Eiji Morinaga, Hidefumi Wakamatsu, Hijiri Abiru, Eiji Arai

    Proceedings of International Conference on Design and Concurrent Engineering 2015   2015.09

     More details

    Kind of work:Joint Work  

  • A Method of Distributed Job-Shop Scheduling for Highly-Distributed Manufacturing Systems Reviewed

    Eiji Morinaga, Tomomi Nakamura, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 23rd International Conference on Production Research   2015.08

     More details

    Kind of work:Joint Work  

  • Framework for Functional Verification in Product Design Considering Ways and Situation of Use Reviewed

    Eiji Morinaga, Takuya Akasaka, Hidefumi Wakamatsu, Eiji Arai, Hijiri Abiru

    Transactions of the Institute of Systems, Control and Information Engineers   28 ( 3 )   116 - 122   2015.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.5687/iscie.28.116

  • A Computer-Aided Process Planning Method Considering Production Scheduling Reviewed

    Eiji Morinaga, Hiroki Joko, Hidefumi Wakamatsu, Eiji Arai

    Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth   348 - 355   2015

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-319-22756-6_43

  • Proper Design of System LSI Using System Design Method SDSI-Cubic Reviewed

    Hidenori Murata, Yoshiharu Iwata, Atsushi Taya, Ryohei Satoh, Eiji Morinaga, Kazuya Okamoto, Keiji Kudo, Kazuhiro Aoyama, Tsuyoshi Koga

    Journal of The Japan Institute of Electronics Packaging   17 ( 7 )   529 - 541   2014.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.5104/jiep.17.529

  • Basic study on production scheduling method for highly-distributed manufacturing systems Reviewed

    Eiji Morinaga, Akira Takagi, Yuki Sakaguchi, Hidefumi Wakamatsu, Eiji Arai

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   8 ( 5 )   2014.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1299/jamdsm.2014jamdsm0072

  • Management system for building production with multi-layer simultaneous auctions Reviewed

    Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   8 ( 5 )   2014.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1299/jamdsm.2014jamdsm0066

  • Estimation of mechanical characteristics of knitted fabric composites Reviewed

    Hidefumi Wakamatsu, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

    Proceedings of ISCIE/ASME 2014 International Symposium on Flexible Automation   ISFA2014 - 82L   2014.07

     More details

    Kind of work:Joint Work  

  • Modeling of curling of plain-knitted fabrics toward its suppression Reviewed

    Hidefumi Wakamatsu, Mari Inoue, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

    Proceedings of ISCIE/ASME 2014 International Symposium on Flexible Automation   ISFA2014 - 92L   2014.07

     More details

    Kind of work:Joint Work  

  • Basic study on product design support considering latent phenomena depending on ways and situations of use Reviewed

    Eiji Morinaga, Takuya Akasaka, Hidefumi Wakamatsu, Eiji Arai, Hijiri Abiru

    Proceedings of ISCIE/ASME 2014 International Symposium on Flexible Automation   ISFA2014 - 76L   2014.07

     More details

    Kind of work:Joint Work  

  • A Method for Modeling of Knitted Loops in A Plain Stitch Fabric and Simulation of Its Curling and Wale Skew Reviewed

    Hidefumi Wakamatsu, Mari Inoue, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

    Journal of Textile Engineering   60 ( 3 )   41 - 50   2014.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.4188/jte.60.41

  • A study on life prediction of core and shielding wires contained in a coaxial cable bent cyclically Reviewed

    Masataka Ogai, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shigeki Shimada, Ken Manabe

    Transactions of the JSME   80 ( 814 )   2014.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.1299/transjsme.2014trans0141

  • Improvement of computational efficiency in flexible computer-aided process planning Reviewed

    Eiji Morinaga, Takuma Hara, Hiroki Joko, Hidefumi Wakamatsu, Eiji Arai

    International Journal of Automation Technology   8 ( 3 )   396 - 405   2014.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.20965/ijat.2014.p0396

  • Research on the Automatic Optimization Algorithm on System Design using the System Definition Reviewed

    Hidenori Murata, Yoshiharu Iwata, Ryohei Satoh, Eiji Morinaga, Kazuya Okamoto, Kazuhiro Aoyama, Tsuyoshi Koga

    Journal of Smart Processing   3 ( 1 )   67 - 75   2014.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.7791/jspmee.3.67

  • A distributed production scheduling method for highly-distributed manufacturing systems Reviewed

    Eiji Morinaga, Yuki Sakaguchi, Hidefumi Wakamatsu, Eiji Arai

    Advances in Production Management Systems; Innovative and Knowledge-Based Production Management in a Global-Local World, Part I   531 - 538   2014

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-662-44739-0_65

  • Study on function decomposition support method using semantic relationships among words Reviewed

    Eiji Morinaga, Mizuki Ichimori, Katsunori Matsushita, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of Design Engineering Workshop 2013   2013.11

     More details

    Kind of work:Joint Work  

  • A study on function decomposition support using semantic relationships among words Reviewed

    Mizuki Ichimori, Eiji Morinaga, Katsunori Matsushita, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the Asia-Pacific Council on Systems Engineering Conference 2013   2013.09

     More details

    Kind of work:Joint Work  

  • A basic study on production scheduling for highly-distributed manufacturing systems Reviewed

    Eiji Morinaga, Akira Takagi, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 22nd International Conference on Production Research   2013.07

     More details

    Kind of work:Joint Work  

  • A basic study on highly distributed production scheduling Reviewed

    Eiji Morinaga, Eiji Arai, Hidefumi Wakamatsu

    Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services   638 - 645   2013

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-3-642-40361-3_81

  • A design method for thin film patterning process via lift-off technique Reviewed

    Eiji Morinaga, Yutaka Matsuura, Hidefumi Wakamatsu, Ryohei Satoh, Koji Nakagawa, Yoshiharu Iwata, Eiji Arai

    Emerging Technology in Precision Engineering XIV   787 - 792   2012.11

     More details

    Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.4028/www.scientific.net/KEM.523-524.787

  • Bending and Torsional Deformation Analysis of a Twisted Wire Reviewed

    Ryuta Moriyasu, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shigeki Shimada, Ken Manabe

    Journal of the Robotics Society of Japan   30 ( 8 )   813 - 821   2012.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.7210/jrsj.30.813

  • Method for film thickness calculation and resist profile design in thin film patterning via lift-off process Reviewed

    Eiji Morinaga, Ryohei Satoh, Koji Nakagawa, Haruhiko Miyagawa, Yutaka Matsuura, Reo Usui, Eiji Arai, Yoshiharu Iwata

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY   30 ( 3 )   244 - 253   2012.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.2207/qjjws.30.244

  • A method for efficient flexible process planning by mathematical optimization Reviewed

    Eiji Morinaga, Takuma Hara, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of ASME/ISCIE 2012 International Symposium on Flexible Automation   ISFA2012 - 7237   2012.06

     More details

    Kind of work:Joint Work  

  • Path planning for belt object manipulation Reviewed

    Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shinichi Hirai

    Proceedings of the 2012 IEEE International Conference on Robotics and Automation   4334 - 4339   2012.05

     More details

    Kind of work:Joint Work  

  • Study on High Heat Proof Multilayer Ag Reflective Films for Optical Devices Reviewed

    Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Eiji Morinaga, Kiyoto Yoneda, Shingo Kamo, Akihiro Kuroda, Koichi Yokota

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY   30 ( 1 )   94 - 99   2012.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.2207/qjjws.30.94

  • A method of flexible process planning considering multiple kinds of machine tools and manufacturing scheduling Reviewed

    Eiji Morinaga, Masayuki Yamada, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 15th International Conference on Mechatronics Technology   331 - 335   2011.11

     More details

    Kind of work:Joint Work  

  • Flexible process planning method for milling Reviewed

    Eiji Morinaga, Masayuki Yamada, Hidefumi Wakamatsu, Eiji Arai

    International Journal of Automation Technology   5 ( 5 )   700 - 707   2011.09

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.20965/ijat.2011.p0700

  • Management system for construction production with multi-layer simultaneous auctions Reviewed

    Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of International Symposium on Scheduling 2011   111 - 116   2011.07

     More details

    Kind of work:Joint Work  

  • High heat proofing nano-layered film Cu Wiring by crystal grain growth control Reviewed

    Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Eiji Morinaga, Koji Nakagawa

    Transactions of the Japan Institute of Electronics Packaging   3 ( 1 )   68 - 72   2010.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.5104/jiepeng.3.68

  • Simulation of deformation of plain knitted fabrics including wale skew Reviewed

    Atsushi Asanae, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

    Proceedings of the 14th International Conference on Mechatronics Technology   399 - 404   2010.11

     More details

    Kind of work:Joint Work  

  • A flexible and efficient process planning method of multi-directional machining Reviewed

    Masayuki Yamada, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    Proceedings of the 14th International Conference on Mechatronics Technology   212 - 216   2010.11

     More details

    Kind of work:Joint Work  

  • Research for Design Information and Design Rationale Integrated CAD (Supporting Conceptual Design by User Descriptions of Influential Relations between Parts) Reviewed

    Akira Tsumaya, Hideaki Yaze, Eiji Morinaga, Kazuhiro Takeuchi, Wataru Uchida, Eiji Arai, Toshiharu Taura

    Transactions of the Japan Society of Mechanical Engineers Series C   76 ( 771 )   2764 - 2771   2010.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.1299/kikaic.76.2764

  • Deformation path planning for manipulation of flexible circuit boards Reviewed

    Yuya Asano, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shinichi Hirai

    Proceedings of the 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems   5386 - 5391   2010.10

     More details

    Kind of work:Joint Work  

  • Deformation path planning for belt object manipulation Reviewed

    Yuya Asano, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of 2010 International Symposium on Flexible Automation   JPL - 2557   2010.07

     More details

    Kind of work:Joint Work  

  • Proposal of system architecture for project based production Reviewed

    Chikara Ariyoshi, Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai

    Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century   699 - 703   2009.12

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1299/jsmelem.2009.5.699

  • Method of process parameter identification and resist profile design for thin-film pattern formation Reviewed

    Eiji Morinaga, Yutaka Matsuura, Ryohei Satoh, Kouji Nakagawa, Reo Usui, Yoshiharu Iwata, Hidefumi Wakamatsu, Eiji Arai

    Service Robotics and Mechatronics   323 - 328   2009.12

     More details

    Kind of work:Joint Work  

  • Disassembly support system for used products considering destruction of their parts Reviewed

    Hidefumi Wakamatsu, Minoru Matsuishi, Eiji Morinaga, Eiji Arai

    Service Robotics and Mechatronics   37 - 42   2009.12

     More details

    Kind of work:Joint Work  

  • Deformation modeling of belt object with angles Reviewed

    Hidefumi Wakamatsu, Eiji Morinaga, Eiji Arai, Shinichi Hirai

    Proceedings of the 2009 IEEE International Conference on Robotics and Automation   606 - 611   2009.05

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1109/ROBOT.2009.5152257

  • Mechanism and rapid process of YAG Laser process on SnO2 system thin films Reviewed

    Reo Usui, Ryohei Satoh, Yu Mihara, Yoshiharu Iwata, Eiji Morinaga, Takamitsu Isono

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY   27 ( 1 )   48 - 54   2009.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.2207/qjjws.27.48

  • Production scheduling system with dynamic lot size in case of considering set-up time Reviewed

    Minoru Koike, Akira Tsumaya, Ryota Matsui, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    Manufacturing Systems and Technologies for the New Frontier   289 - 292   2008.05

     More details

    Publishing type:Part of collection (book)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1007/978-1-84800-267-8_59

  • Beam matching adaptive control via extremum seeking Reviewed International coauthorship

    Eugenio Schuster, Chao Xu, Nicholas Torres, Eiji Morinaga, Christopher Allen, Miroslav Krstić

    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment   581 ( 3 )   799 - 815   2007.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1016/j.nima.2007.07.154

  • Highly conductive SnO2 thin films for flat panel displays Reviewed

    Takamitsu Isono, Takeshi Fukuda, Kouji Nakagawa, Reo Usui, Ryohei Satoh, Eiji Morinaga, Yu Mihara

    Journal of the Society for Information Display   15 ( 2 )   161 - 166   2007.02

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1889/1.2709738

  • Optimal beam matching in particle accelerators via extremum seeking Reviewed International coauthorship

    Eugenio Schuster, Eiji Morinaga, Christopher Allen, Miroslav Krstić

    Proceedings of the 2006 American Control Conference   1962 - 1967   2006.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1109/ACC.2006.1656508

  • Research on direct laser patterning of thin films for flat-panel display Reviewed

    Reo Usui; Ryohei Satoh; Yoshiharu Iwata; Koji Nakagawa; Eiji Morinaga; Satoru Takaki

    Proceedings of the 24th International Congress on Applications of Lasers & Electro-Optics   13 - 19   2005.11

     More details

    Publishing type:Research paper (international conference proceedings)   International / domestic magazine:International journal  

    DOI: 10.2351/1.5060528

  • An L2-gain analysis of piecewise affine systems by piecewise quadratic storage functions Reviewed

    Eiji Morinaga, Kenji Hirata

    Proceedings of the 2004 American Control Conference   5176 - 5181   2004.06

     More details

    Authorship:Lead author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.23919/ACC.2004.1384674

  • L2-Gain Analysis of Piecewise Affine Systems via Piecewise Quadratic Storage Functions Reviewed

    Eiji Morinaga, Kenji Hirata

    Transactions of the Society of Instrument and Control Engineers   40 ( 4 )   405 - 414   2004.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.9746/sicetr1965.40.405

  • Performance analysis of control systems with input constraints via piecewise quadratic storage functions Reviewed

    Eiji Morinaga, Kenji Hirata, Yoshito Ohta

    Asian Journal of Control   6 ( 1 )   34 - 45   2004.03

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work   International / domestic magazine:International journal  

    DOI: 10.1111/j.1934-6093.2004.tb00182.x

▼display all

MISC

  • Basic Study on Supporting Idea Generation about Product Needs and Uses Using Natural Language Processing Techniques Invited Reviewed International journal

    Eiji Morinaga

    59 ( 5 )   216 - 221   2024.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

  • Preface for the special issue on Design, Concurrent Engineering and Smart Manufacturing towards Highly Digitalized Society International journal

    Eiji MORINAGA, Masato INOUE, Rei HINO, Koji IWAMURA, Tsuyoshi KOGA, Tetsuro OGI, Koichiro SATO, Sharifu URA, Hideyoshi YANAGISAWA, Kenichiro ITO, Takeo KATO, Tomomi NONAKA, Masashi OKUBO, Tomohisa TANAKA, Shuho YAMADA

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   16 ( 5 )   JAMDSM0045 - JAMDSM0045   2022.10

     More details

    Authorship:Lead author   International / domestic magazine:International journal  

    DOI: doi.org/10.1299/jamdsm.2022jamdsm0045

  • Preface International journal

    Yoshitaka TANIMIZU, Masahiro ARAKAWA, Toru EGUCHI, Yoshiyuki KARUNO, Tatsushi NISHI, Rei HINO, Keisuke MURAKAMI, Eiji MORINAGA

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   16 ( 4 )   JAMDSM0033 - JAMDSM0033   2022.10

  • 使い方を考慮した製品設計支援の取組み Invited Reviewed International journal

    森永英二,若松栄史

    システム/制御/情報   65 ( 3 )   103 - 108   2021.03

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.11509/isciesci.65.3_103

  • 特集「これからが本番、IoTの発展浸透に向けた新技術」を企画して International journal

    森永英二、有坂寿洋

    日本機械学会誌   123 ( 1223 )   4 - 5   2020.10

     More details

  • Preface International journal

    Shunji TANAKA, Shunji IMAHORI, Koji IWAMURA, Shungo KOICHI, Ryuhei MIYASHIRO, Eiji MORINAGA, Keisuke MURAKAMI, Tatsuhiko SAKAGUCHI, Tetsuo YAMADA

    Journal of Advanced Mechanical Design, Systems, and Manufacturing   14 ( 5 )   JAMDSM0065 - JAMDSM0065   2020.07

     More details

  • 「フレキシブル・オートメーション」総合特集号を企画して International journal

    白瀬 敬一, 森永 英二

    システム/制御/情報   63 ( 5 )   181 - 181   2019.05

  • 高度情報環境下における生産・サービスシステムデザインの検討 International journal

    藤井信忠,森永英二,妻屋彰,荒井栄司,藤井進

    精密工学会誌   84 ( 10 )   825 - 829   2018.10

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.2493/jjspe.84.825

  • 製品設計における使い方を考慮した不具合検出の枠組み Invited International journal

    森永英二,若松栄史,荒井栄司

    設計工学   52 ( 12 )   704 - 709   2017.12

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

  • 独立行政法人日本学術振興会産学協力研究委員会システムデザイン・インテグレーション第177委員会 Invited International journal

    青山和浩, 岩田剛治, 野間口大, 古賀毅, 森永英二

    システム/制御/情報   61 ( 11 )   471 - 472   2017.11

  • 大阪大学 大学院工学研究科 マテリアル生産科学専攻 生産システムインテグレーション領域 Invited International journal

    若松栄史, 森永英二

    システム/制御/情報   61 ( 5 )   202 - 203   2017.05

  • 平編地の斜行予測のための撚糸の解撚トルクの推定 International journal

    若松栄史,森永英二,荒井栄司

    繊維機械学会誌   69 ( 5 )   55 - 59   2016.05

     More details

  • 平編み地におけるカーリング現象のモデリング International journal

    若松栄史,井上真理,倉敷哲生,森永英二,荒井栄司

    繊維機械学会誌   67 ( 3 )   183 - 188   2014.03

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

  • 編物複合材料の力学的特性のシミュレーション International journal

    若松栄史,倉敷哲生,森永英二,荒井栄司,武内俊次

    繊維機械学会誌   67 ( 1 )   29 - 34   2014.01

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

  • 生産環境の変動への柔軟な対応を志向した加工工程設計支援の取組み Invited Reviewed International journal

    森永英二,若松栄史,荒井栄司

    システム/制御/情報   57 ( 3 )   114 - 119   2013.03

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.11509/isciesci.57.3_114

  • 画像処理を用いた糸の物性値の簡易計測手法 International journal

    若松栄史,森永英二,荒井栄司,井上真理

    繊維機械学会誌   65 ( 9 )   524 - 529   2012.09

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.4188/transjtmsj.65.524

  • 平編み構造の斜行予測と抑制に関する研究 International journal

    若松栄史,武内俊次,森永英二,荒井栄司

    繊維機械学会誌   64 ( 10 )   605 - 610   2011.10

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: 10.4188/transjtmsj.64.605

  • ニット生地における斜行を含めた編み目形状のシミュレーション International journal

    若松栄史,武内俊次,森永英二,荒井栄司

    繊維機械学会誌   62 ( 10 )   623 - 628   2009.10

     More details

    Publishing type:Article, review, commentary, editorial, etc. (scientific journal)   Kind of work:Joint Work   International / domestic magazine:Domestic journal  

    DOI: doi.org/10.4188/transjtmsj.62.623

▼display all

Presentations

  • A Basic Study on Supporting Idea Generation about Product Needs Using Natural Language Processing Techniques Domestic conference

    Eiji Morinaga, Yuho Takano

    2024.05 

     More details

    Presentation type:Oral presentation (general)  

  • Improvement of job shop scheduling method based on mathematical optimization and machine learning International conference

    Eiji Morinaga, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    The 5th International Conference on Industry 4.0 and Smart Manufacturing  2023.11 

     More details

    Presentation type:Oral presentation (general)  

    Venue:Lisbon, Portugal  

  • An Improved Method of Job Shop Scheduling Considering Reworking and Reprocessing based on Proactive Approach International conference

    Eiji Morinaga, Kenta Teramoto, Hidefumi Wakamatsu

    International Conference on Advances in Production Management Systems 2023  2023.09  IFIP WG 5.7

     More details

    Presentation type:Oral presentation (general)  

    Venue:Trondheim, Norway  

  • A Study on Sophisticated Production Management for Engineer-to-Order Production --- A Load Planning Method Based on Integer Programming Problem for Long-Term Production Plan Domestic conference

    Yoshiyuki Hirahara, Masamitsu Fukuda, Ayumu Niinuma, Hirotomo Oshima, Yasuo Namioka, Koji Iwamura, Eiji Morinaga

    2023.09 

     More details

    Presentation type:Oral presentation (general)  

  • A Study on Sophisticated Production Management for Engineer-to-Order Production (A Mixed Integer Programming Formulation of Scheduling Problems) Domestic conference

    Eiji Morinaga, Koji Iwamura, Yoshiyuki Hirahara, Masamitsu Fukuda, Ayumu Niinuma, Hirotomo Oshima, Yasuo Namioka

    2023.09 

     More details

    Presentation type:Oral presentation (general)  

  • A Basic Study on Supporting Idea Generation for Product Needs by Natural Language Processing Domestic conference

    Eiji Morinaga, Kei Imai, Erii Todo

    2023.05 

     More details

    Presentation type:Oral presentation (general)  

  • ソーシャルネットワーキングサービスを活用した製品の使い方の発想支援に関する基礎検討 Domestic conference

    森永英二、東藤絵梨衣、今井啓

    2023年度精密工学会春季大会学術講演会  2023.03  精密工学会

     More details

    Presentation type:Oral presentation (general)  

    Venue:東京  

  • Demand Forecasting and Inventory Simulation Based on VAR Model Using POS Data of Breads in Supermarkets International conference

    Koji Iwamura, Itsuki Doe, Nobuhiro Sugimura, Eiji Morinaga, Naoki Hirabayashi, Yasuhiro Kinoshita, Kazunuki Kimura

    The 19th International Conference on Precision Engineering  2022.11 

     More details

    Presentation type:Oral presentation (general)  

    Venue:Nara, Japan  

  • A Study on sophisticated production management for engineer-to-order production Domestic conference

    Yoshiyuki Hirahara, Takehiro Kato, Masamitsu Fukuda, Hirotomo Oshima, Yasuo Namioka, Koji Iwamura, Eiji Morinaga

    2022.11 

     More details

    Presentation type:Oral presentation (general)  

  • An improved method of job shop scheduling using machine learning and mathematical optimization International conference

    Eiji Morinaga, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    The 4th International Conference on Industry 4.0 and Smart Manufacturing  2022.11 

     More details

    Presentation type:Oral presentation (general)  

    Venue:Hagenberg, Linz, Austria  

  • An Improved Method of Job-Shop Scheduling through Integration of Machine Learning and Mathematical Programming Domestic conference

    Xuetian Tang, Eiji Morinaga

    2022.09 

     More details

    Presentation type:Oral presentation (general)  

  • A Method of Flow Shop Scheduling Based on Matheuristics Domestic conference

    Eiji Morinaga, Kentaro Nakagawa, Hidefumi Wakamatsu

    2022.03 

     More details

    Presentation type:Oral presentation (general)  

  • 混流生産における投入順序・部品搬送統合化計画問題の効率的解法 Invited Domestic conference

    森永英二、中村匠、若松栄史

    スマートプロセス学会2021年度学術講演会  2021.11  スマートプロセス学会

     More details

    Presentation type:Oral presentation (invited, special)  

  • A Method of Proactive Job Shop Scheduling Considering Reworking and Reprocessing International conference

    Eiji Morinaga, Kenta Teramoto, Hidefumi Wakamatsu

    International Conference on Leading Edge Manufacturing in 21st Century  2021.11 

     More details

    Presentation type:Oral presentation (general)  

  • A demand forecasting of lettuces in Osaka central market for trading markets of plant factories Domestic conference

    Thinh Quang Nguyen, Shohei Kohama, Nobuhiro Sugimura, Koji Iwamura, Eiji Morinaga, Naoki Hirabayashi

    2021.11 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.11511/jacc.64.0_471

  • Cause Prediction of Product Defects Using Event Causality Domestic conference

    Hidefumi Wakamatsu, Itsuki Hatano, Eiji Morinaga, Yoshiharu Iwata

    JSME Design & Systems Conference `21  2021.09 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1299/jsmedsd.2021.31.2206

  • A demand forecasting of lettuces in wholesale markets for trading markets of plant factories International conference

    Thinh Quang, Shohei Kohama, Nobuhiro Sugimura, Koji Iwamura, Eiji Morinaga, Naoki Hirabayashi

    International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021  2021.09 

     More details

    Presentation type:Oral presentation (general)  

  • A basic study on data-driven job shop scheduling International conference

    Eiji Morinaga, Naoki Otsuka, Hidefumi Wakamatsu, Xuetian Tang, Koji Iwamura, Naoki Hirabayashi

    International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021  2021.09 

     More details

    Presentation type:Oral presentation (general)  

  • Integration of Sequencing and Part-Delivery Planning in Mixed-Model Production Invited Domestic conference

    Eiji Morinaga

    The 27th Symposium on "Microjoining and Assembly Technology in Electronics"  2021.02 

     More details

    Presentation type:Oral presentation (invited, special)  

  • Deformation Simulation of Shield Braid of Electric Wire Domestic conference

    Hidefumi Wakamatsu, Shuhei Narita, Eiji Morinaga

    The 27th Symposium on "Microjoining and Assembly Technology in Electronics"  2021.02 

     More details

    Presentation type:Oral presentation (general)  

  • Guide Part Design of a Tying Tool to Bind Wire Harness for Airplanes Domestic conference

    Yuma Ishihara, Hidefumi Wakamatsu, Eiji Morinaga

    The 27th Symposium on "Microjoining and Assembly Technology in Electronics"  2021.02 

     More details

    Presentation type:Oral presentation (general)  

  • A Basic Study on Job-Shop Scheduling Using Machine Learning Techniques Domestic conference

    Eiji Morinaga, Naoki Otsuka, Hidefumi Wakamatsu

    2020.09 

     More details

    Presentation type:Oral presentation (general)  

  • A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops International conference

    Daiki Yasuda, Eiji Morinaga, Hidefumi Wakamatsu

    International Conference on Advances in Production Management Systems 2020  2020.09  IFIP WG5.7

     More details

    Presentation type:Oral presentation (general)  

    DOI: 10.1007/978-3-030-57997-5_56

  • 3D Shape Prediction of a Paper Model for a Brassiere Cup Consisting of Multiple Polygonal Patterns International conference

    Hidefumi Wakamatsu, Kyosuke Shirai, Eiji Morinaga, Takahiro Kubo

    International Symposium on Flexible Automation 2020  2020.07 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1115/ISFA2020-9624

  • Design of a Two-Piece Brassiere Cup From Its Data Points Toward Its Automation International conference

    Kotaro Yoshida, Hidefumi Wakamatsu, Eiji Morinaga, Takahiro Kubo

    International Symposium on Flexible Automation 2020  2020.07 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1115/ISFA2020-9612

  • Bending Simulation of a Shielding Braid Toward Its Lifespan Prediction International conference

    Shuhei Narita, Hidefumi Wakamatsu, Eiji Morinaga

    International Symposium on Flexible Automation 2020  2020.07 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1115/ISFA2020-9613

  • Behavior Modeling for Product Design Support Focusing on Topological Information of Components International conference

    Itsuki Hatano, Hidefumi Wakamatsu, Eiji Morinaga

    International Symposium on Flexible Automation 2020  2020.07 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1115/ISFA2020-9614

  • ブラジャーの設計支援のための型紙の三次元形状予測〜第三報:複雑なパターン形状に対する汎用性の拡張〜 Domestic conference

    若松栄史、白井恭介、森永英二、久保貴裕

    日本繊維機械学会第73回年次大会  2020.06  日本繊維機械学会

     More details

    Presentation type:Oral presentation (general)  

  • 組紐状構造物の屈曲挙動シミュレーション Domestic conference

    成田周平、若松栄史、森永英二

    日本繊維機械学会第73回年次大会  2020.06  日本繊維機械学会

     More details

    Presentation type:Oral presentation (general)  

  • 外力による微小変形の生じたブラジャーカップの変形形状簡易予測手法 Domestic conference

    吉田皓太郎、若松栄史、森永英二、久保貴裕

    日本繊維機械学会第73回年次大会  2020.06  日本繊維機械学会

     More details

    Presentation type:Oral presentation (general)  

  • Integrated production scheduling and simulation for highly-distributed manufacturing systems Domestic conference

    Daiki Yasuda, Eiji Morinaga, Hidefumi Wakamatsu

    2020.03 

     More details

    Presentation type:Oral presentation (general)  

  • ブラジャーカップ設計支援のための型紙の変形シミュレーション Domestic conference

    白井恭介、若松栄史、森永英二、久保貴裕

    第37回日本ロボット学会学術講演会  2019.09  日本ロボット学会

     More details

    Presentation type:Oral presentation (general)  

  • Reduction of Computational Load in Robust Facility Layout Planning Considering Temporal Production Efficiency International conference

    Eiji Morinaga, Komei Iwasaki, Hidefumi Wakamatsu, Eiji Arai

    International Conference on Advances in Production Management Systems 2019  2019.09 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1007/978-3-030-29996-5_22

  • A Study on Highly-Distributed Manufacturing System Simulation International conference

    Eiji Morinaga, Daiki Yasuda, Yudai Imagawa, Hidefumi Wakamatsu, Akira Tsumaya, Tatsuo Inoue, Koji Iwamura, Motohiro Ishibashi, Nobutada Fujii, Eiji Arai, Susumu Fujii

    The 25th International Conference on Production Research  2019.08 

     More details

    Presentation type:Oral presentation (general)  

    DOI: doi.org/10.1016/j.promfg.2020.01.227

  • A Study on Highly-Distributed Manufacturing System Simulation under Ubiquitous Environment (3rd Report) ---Basic Study on Transportation Simulation--- Domestic conference

    Eiji Morinaga, Yudai Imagawa, Daiki Yasuda, Hidefumi Wakamatsu, Akira Tsumaya, Tatsuo Inoue, Koji Iwamura, Motohiro Ishibashi, Nobutada Fujii, Eiji Arai, Susumu Fujii

    2019.03 

     More details

    Presentation type:Oral presentation (general)  

  • 混合品種ライン生産における投入順序・部品搬送の改良型統合化計画法 Domestic conference

    中村匠、森永英二、若松栄史、荒井栄司

    第25回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2019.01 

     More details

    Presentation type:Oral presentation (general)  

  • ブラジャーカップの型紙設計支援 Domestic conference

    吉田皓太郎、若松栄史、森永英二、荒井栄司、久保貴裕

    日本機械学会第28回設計工学・システム部門講演会  2018.11  日本機械学会設計工学・システム部門

     More details

    Presentation type:Oral presentation (general)  

  • 航空機用ワイヤーハーネスの自動結束を目指した結び工具の設計 Domestic conference

    宗田あずみ、若松栄史、森永英二、荒井栄司

    日本機械学会第28回設計工学・システム部門講演会  2018.11  日本機械学会設計工学・システム部門

     More details

    Presentation type:Oral presentation (general)  

  • Fundamental Study on on Modification Process of Design Plan for Computer-Aided Product Design Considering Ways of Usage International conference

    Eiji Morinaga, Hidefumi Wakamatsu, Yusuke Goto, Eiji Arai

    International Conference on Design and Concurrent Engineering 2018  2018.09 

     More details

    Presentation type:Oral presentation (general)  

  • 生産現場の要求を考慮した設備割付に関する一考察 Domestic conference

    森永英二、下村幸弘、若松栄史、荒井栄司、中村昌弘

    日本機械学会2018年度年次大会  2018.09  日本機械学会

     More details

    Presentation type:Oral presentation (general)  

  • ブラジャーカップ設計支援のための型紙形状からのカップ形状予測 Domestic conference

    白井恭介、若松栄史、森永英二、荒井栄司

    日本繊維機械学会第71回年次大会  2018.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 編目の力学的特性を考慮した曲面表現に基づく平編地のカーリング現象の予測 Domestic conference

    若松栄史、乾陽亮、森永英二、荒井栄司

    日本繊維機械学会第71回年次大会  2018.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 結束力予測のための帯状紐の結び目モデリング Domestic conference

    家村駿一、若松栄史、森永英二、荒井栄司

    日本繊維機械学会第71回年次大会  2018.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 使い方を考慮した製品設計における設計案修正過程の計算機支援に関する基礎的検討 Domestic conference

    後藤祐輔、森永英二、若松栄史、荒井栄司

    日本設計工学会2018年度春季大会研究発表講演会  2018.05  日本設計工学会

     More details

    Presentation type:Poster presentation  

  • 焼きなまし法を用いたジョブショップスケジューリングにおける高効率化法の検討 Domestic conference

    寺本健太、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2018  2018.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 製品設計案の機能検証のための製品の使い方の予測に関する研究 Domestic conference

    森永英二、若松栄史、目賀眞周、荒井栄司

    第24回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2018.01 

     More details

    Presentation type:Poster presentation  

  • 製品設計における不具合検出のための使い方の予測に関する一考察 Domestic conference

    森永英二、若松栄史、目賀眞周、荒井栄司

    2017年度精密工学会秋季大会学術講演会  2017.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 編物の風合い設計を目指した平編地の曲げ剛性の予測 Domestic conference

    乾陽亮、若松栄史、森永英二、荒井栄司

    日本機械学会第27回設計工学・システム部門講演会  2017.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 事象因果予測のための事象の分類と計算機表現についての検討 Domestic conference

    明石一希、森永英二、若松栄史、倉橋龍、荒井栄司

    日本機械学会第27回設計工学・システム部門講演会  2017.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 概念設計と実体設計の包括的支援のための設計情報の計算機表現の検討 Domestic conference

    倉橋龍、森永英二、若松栄史、明石一希、荒井栄司

    日本機械学会第27回設計工学・システム部門講演会  2017.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 微分幾何法に基づいた三次元線状物体の動的変形形状予測 Domestic conference

    田中文彬、若松栄史、森永英二、荒井栄司

    第35回日本ロボット学会学術講演会  2017.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 航空機用ワイヤーハーネス結束のための結び工具の開発 Domestic conference

    宗田あずみ、若松栄史、森永英二、荒井栄司

    第35回日本ロボット学会学術講演会  2017.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 二枚接ぎブラジャーカップの型紙設計支援 Domestic conference

    吉田皓太郎、若松栄史、森永英二、荒井栄司、久保貴裕

    第61回システム制御情報学会研究発表講演会  2017.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • 混合品種組立ラインにおける製品投入順序付けと部品配送計画との統合化 ~混合整数計画問題としての定式化~ Domestic conference

    出口涼介、森永英二、若松栄史、荒井栄司

    第61回システム制御情報学会研究発表講演会  2017.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • 作業人員と班構成を考慮したフレキシブルジョブショップスケジューリングの一手法 Domestic conference

    森永英二、坂口祐生、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2017  2017.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 高度分散生産システムのためのフレキシブルジョブショップスケジューリングの一手法 Domestic conference

    森永英二、中村和海、若松栄史、荒井栄司

    第23回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2017.01 

     More details

    Presentation type:Poster presentation  

  • 三枚接ぎブラジャーカップ設計支援のための紙模型の三次元形状予測 Domestic conference

    笠泰徳、若松栄史、森永英二、荒井栄司、久保貴裕

    Designシンポジウム2016  2016.12 

     More details

    Presentation type:Poster presentation  

  • 挙動および機能の構造・発現順序の統合的表現とその活用 Domestic conference

    倉橋龍、森永英二、若松栄史、明石一希、荒井栄司

    日本機械学会第26回設計工学・システム部門講演会  2016.10  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 挙動・事象因果の定量的表現に基づく製品の不具合検証 Domestic conference

    明石一希、森永英二、若松栄史、倉橋龍、荒井栄司

    日本機械学会第26回設計工学・システム部門講演会  2016.10  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 高度分散生産スケジューリング法の開発 ~フレキシブルジョブショップスケジューリングへの拡張~ Domestic conference

    中村和海、森永英二、若松栄史、荒井栄司

    スケジューリング・シンポジウム2016  2016.09  スケジューリング学会

     More details

    Presentation type:Poster presentation  

  • 高度分散フレキシブルジョブショップスケジューリングの一手法 Domestic conference

    中村和海、森永英二、若松栄史、荒井栄司

    日本機械学会2016年度年次大会  2016.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 対撚り線の変形形状予測に関する研究 Domestic conference

    田中文彬、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    第34回日本ロボット学会学術講演会  2016.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • A Unified Modeling of Function and Behavior Using Petri Net International conference

    Eiji Morinaga, Hidefumi Wakamatsu, Ryu Kurahashi, Kazuki Akashi, Eiji Arai

    The 7th International Conference on Design Computing and Cognition  2016.06 

     More details

    Presentation type:Poster presentation  

  • 撚糸の撚り戻り挙動のシミュレーションとそれに基づく平編地の斜行予測 Domestic conference

    乾陽亮、若松栄史、森永英二、荒井栄司、八木宏幸、森秀茂、松本龍守

    日本繊維機械学会第69回年次大会  2016.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • ブラジャーの設計支援のための型紙の三次元形状予測 ~第二報:三枚接ぎカップへの適用~ Domestic conference

    若松栄史、笠泰徳、森永英二、荒井栄司、久保貴裕

    日本繊維機械学会第69回年次大会  2016.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 混合品種組立ラインにおける製品投入順序付けと部品配送計画との統合化に関する一考察 Domestic conference

    ザン チョウ、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2016  2016.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • スケジューリングを考慮した機械加工工程設計支援の一手法 Domestic conference

    チェレンラープクン ナッタプーム、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2016  2016.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 時間的生産効率を考慮したロバスト設備配置計画に関する一考察 Domestic conference

    岩崎孔明、森永英二、若松栄史、荒井栄司

    第58回自動制御連合講演会  2015.11 

     More details

    Presentation type:Poster presentation  

  • 遺伝的アルゴリズムによるフレキシブルジョブショップスケジューリングの一手法 Domestic conference

    坂口祐生、森永英二、若松栄史、荒井栄司

    日本機械学会2015年度年次大会  2015.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 線状物体の三次元形状からの作用力の予測 Domestic conference

    永井雄一朗、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    第33回日本ロボット学会学術講演会  2015.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 編物構造のモデル化に基づく編物複合材料の力学解析 Domestic conference

    若松栄史、船原佑介、森永英二、荒井栄司、田邉大貴、倉敷哲生、武内俊次

    日本繊維機械学会第68回年次大会  2015.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 解撚トルクの推定に基づく平編地の斜行予測 Domestic conference

    若松栄史、山本恭史、森永英二、荒井栄司、八木宏幸、森秀茂、松本龍守

    日本繊維機械学会第68回年次大会  2015.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • ブラジャーの設計支援のための型紙の三次元形状予測 Domestic conference

    若松栄史、笠泰徳、森永英二、荒井栄司、久保貴裕、小山真、岸本泰蔵

    日本繊維機械学会第68回年次大会  2015.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 使い方を考慮した製品設計案の機能検証に関する一考察 ~自律移動体への適用~ Domestic conference

    目賀眞周、森永英二、若松栄史、荒井栄司

    第59回システム制御情報学会研究発表講演会  2015.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • スケジューリングを考慮した工程設計支援に関する一考察 Domestic conference

    上甲宏樹、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2015  2015.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 搬送経路と時間的生産効率を考慮した設備レイアウト計画の一手法 Domestic conference

    岩崎孔明、森永英二、若松栄史、荒井栄司

    日本機械学会2014年度年次大会  2014.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 要求の曖昧性を考慮した設計上流段階の計算機支援に関する一考察 Domestic conference

    森永英二、一森瑞生、若松栄史、荒井栄司

    日本機械学会第24回設計工学・システム部門講演会  2014.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 接触を伴う線状物体の変形形状及び作用力の予測 Domestic conference

    永井雄一朗、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    第32回日本ロボット学会学術講演会  2014.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 使用方法・環境を考慮した製品設計案の機能検証方法論に関する研究 ~製品の挙動・機能のモデル化に関する一考察~ Domestic conference

    阿比留聖、森永英二、若松栄史、荒井栄司

    2014年度精密工学会秋季大会学術講演会  2014.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • Basic study on facility layout planning considering production scheduling International conference

    Eiji Morinaga, Yutaro Shintome, Hidefumi Wakamatsu, Eiji Arai

    ISCIE/ASME 2014 International Symposium on Flexible Automation  2014.07 

     More details

    Presentation type:Poster presentation  

  • Behavior analysis method for product design support International conference

    Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai, Hijiri Abiru

    International Conference on Electronics Packaging 2014  2014.04 

     More details

    Presentation type:Poster presentation  

  • ツイストペアケーブルの屈曲挙動解析 Domestic conference

    小粥雅貴、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    日本機械学会生産システム部門研究発表講演会2014  2014.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 使い方に起因する製品の機能的不具合検出に向けた挙動モデル作成支援 Domestic conference

    阿比留聖、森永英二、若松栄史、荒井栄司

    2014年度精密工学会春季大会学術講演会  2014.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 機能と挙動の総合的表現による要求処理の方法論に関する一考察 Domestic conference

    一森瑞生、森永英二、若松栄史、荒井栄司

    日本機械学会第23回設計工学・システム部門講演会  2013.10  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 生産スケジューリングを考慮した設備配置計画に関する一考察 Domestic conference

    森永英二、新留祐太郎、若松栄史、荒井栄司

    日本機械学会2013年度年次大会  2013.09  日本機械学会

     More details

    Presentation type:Oral presentation (general)  

  • 使い方に依存する潜在的事象を考慮した製品設計支援法に関する研究 ―挙動と機能のモデル化に関する一考察― Domestic conference

    森永英二、若松栄史、荒井栄司、阿比留聖

    2013年度精密工学会秋季大会学術講演会  2013.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 編物複合材料の力学的特性のシミュレーション Domestic conference

    若松栄史、山口遼太、倉敷哲生、森永英二、荒井栄司、武内俊次

    日本繊維機械学会第66回年次大会  2013.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 平編み地におけるカーリング現象のモデリング Domestic conference

    若松栄史、井上真理、倉敷哲生、森永英二、荒井栄司、武内俊次

    日本繊維機械学会第66回年次大会  2013.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 同軸ケーブルの屈曲挙動解析 Domestic conference

    小粥雅貴、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    日本機械学会生産システム部門研究発表講演会2013  2013.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 超分散生産スケジューリングの一手法 ―非一定時間間隔での材料到着と加工待ち発生を考慮した処理フロー― Domestic conference

    高木明、森永英二、若松栄史、荒井栄司

    2013年度精密工学会春季大会学術講演会  2013.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 使い方に依存する潜在的事象を考慮した製品設計支援法に関する研究 Domestic conference

    赤坂卓也、森永英二、若松栄史、荒井栄司

    2013年度精密工学会春季大会学術講演会  2013.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 柔軟性を指向した機械加工工程設計手法における計算効率の一改善法 Domestic conference

    原琢磨、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2013  2013.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 使用環境に依存する潜在的事象を考慮した製品設計支援に関する研究 Domestic conference

    森永英二、赤坂卓也、若松栄史、荒井栄司

    Designシンポジウム2012  2012.10 

     More details

    Presentation type:Poster presentation  

  • A basic study on highly distributed production scheduling International conference

    Eiji Arai, Eiji Morinaga, Hidefumi Wakamatsu

    International Conference on Advances in Production Management Systems 2012  2012.09 

     More details

    Presentation type:Poster presentation  

  • システムデザイン手法フレームワークSDSI-Cubicに関する研究 ―システムデザインワークフローに応じた最適化問題の自動構築― Domestic conference

    村田秀則、岩田剛治、佐藤了平、森永英二

    日本機械学会第22回設計工学・システム部門講演会  2012.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • システムデザイン手法フレームワークSDSI-Cubicに関する研究 ―システムデザインワークフローの自動構築― Domestic conference

    村田秀則、岩田剛治、佐藤了平、森永英二、青山和浩、古賀毅

    日本機械学会第22回設計工学・システム部門講演会  2012.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 使用環境に起因する潜在的事象を考慮した製品設計に関する一考察 Domestic conference

    赤坂卓也、森永英二、若松栄史、荒井栄司

    日本機械学会第22回設計工学・システム部門講演会  2012.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 語句間の関係に基づく機能分解支援に関する一考察 Domestic conference

    森永英二、松下克則、若松栄史、荒井栄司

    日本機械学会第22回設計工学・システム部門講演会  2012.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 帯状物体のマニピュレーションのための軌道導出手法 Domestic conference

    若松栄史、森永英二、荒井栄司

    2012年度精密工学会北海道支部学術講演会  2012.09 

     More details

    Presentation type:Poster presentation  

  • 需要変動を考慮したロバスト設備レイアウトに関する一考察 Domestic conference

    森永英二、水本一生、若松栄史、荒井栄司

    2012年度精密工学会秋季大会学術講演会  2012.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 帯状物体の物性値同定と個体差に対応した動作計画 Domestic conference

    青木正之、若松栄史、荒井栄司、森永英二

    日本ロボット学会第30回記念学術講演会  2012.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 素線束の不規則挙動を考慮した電線の曲げ/ねじれ変形解析 Domestic conference

    若松栄史、森安竜大、森永英二、荒井栄司、島田茂樹、眞鍋賢

    日本ロボット学会第30回記念学術講演会  2012.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • A basic study on a highly distributed simulation of manufacturing systems under the ubiquitous environment International conference

    Susumu Fujii, Nobutada Fujii, Koji Iwamura, Eiji Morinaga, Akira Tsumaya, Tatsuo Inoue, Toshisada Mariyama

    ASME/ISCIE International Symposium on Flexible Automation 2012  2012.06 

     More details

    Presentation type:Poster presentation  

  • 画像処理を用いた糸の物性値の簡易計測手法 Domestic conference

    若松栄史、大前勇樹、森永英二、荒井栄司、井上真理

    日本繊維機械学会第65回年次大会  2012.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 編物複合材料の編物構造モデル構築手法に関する研究 Domestic conference

    山口遼太、若松栄史、森永英二、荒井栄司、武内俊次

    日本繊維機械学会第65回年次大会  2012.06  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • Study of low temperature and high heat-resistant fluxless bonding via nanoscale thin film control toward wafer-level multiple chip stacking for 3D LSI International conference

    Eiji Morinaga, Yuichi Oka, Hiroaki Nishimori, Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Ryota Kanezaki

    The 62nd Electronic Components and Technology Conference  2012.05 

     More details

    Presentation type:Poster presentation  

  • 大型溶接構造物の組立・搭載工程計画に関する研究 ―簡易計算による形状/寸法精度と組立順序との関係について― Domestic conference

    若松栄史、森永英二、望月正人、荒井栄司

    溶接学会平成24年度春季全国大会  2012.04  溶接学会

     More details

    Presentation type:Poster presentation  

  • 組立現場での工夫を考慮した公差設計に関する考察 Domestic conference

    森永英二、塩谷景一、若松栄史、荒井栄司

    溶接学会平成24年度春季全国大会  2012.04  溶接学会

     More details

    Presentation type:Poster presentation  

  • 不良品修正工程を考慮した生産スケジューリングの一手法 Domestic conference

    的野匡史、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2012  2012.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • ユビキタス環境下における超分散生産システムシミュレーションに関する研究(第2報) ―超分散生産システムシミュレーションの枠組み― Domestic conference

    藤井進、藤井信忠、岩村幸治、森永英二、妻屋彰、井上達男、毬山利貞

    2012年度精密工学会春季大会学術講演会  2012.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • ユビキタス環境下における超分散生産システムシミュレーションに関する研究(第1報) ―超分散シミュレーションのための時間管理機構― Domestic conference

    藤井進、藤井信忠、岩村幸治、森永英二、妻屋彰、小池稔

    2012年度精密工学会春季大会学術講演会  2012.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • A Scheduling Method for Highly Distributed Manufacturing System Domestic conference

    Hejun Pan, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    日本機械学会生産システム部門研究発表講演会2012  2012.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 次世代3D-SiP用温度階層接続方式に関する研究 Domestic conference

    佐藤幸博、佐藤了平、岩田剛治、森永英二、米田聖人、岡雄一

    第18回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2012.02 

     More details

    Presentation type:Poster presentation  

  • Construction production scheduling with multi-layer simultaneous auctions International conference

    Eiji Arai, Hidefumi Wakamatsu, Eiji Morinaga

    International Conference on Advances in Production Management Systems 2011  2011.09 

     More details

    Presentation type:Poster presentation  

  • 機能分解木表現における設計解の類似度評価を用いた概念設計支援に関する一考察 Domestic conference

    森永英二、山崎祥悟、若松栄史、荒井栄司

    日本機械学会第21回設計工学・システム部門講演会  2011.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 二重撚り構造を考慮した電線の曲げ/ねじれ変形解析 Domestic conference

    森安竜大、若松栄史、森永英二、荒井栄司、島田茂樹、眞鍋賢

    第29回日本ロボット学会学術講演会  2011.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • リフトオフ法を用いたパターン薄膜形成プロセスの一設計手法 Domestic conference

    森永英二、松浦豊、若松栄史、佐藤了平、中川浩司、岩田剛治、荒井栄司

    2011年度精密工学会秋季大会学術講演会  2011.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 多面加工および複数設備による加工を考慮した柔軟な加工工程設計支援の一手法 Domestic conference

    森永英二、山田昌幸、若松栄史、荒井栄司

    日本機械学会2011年度年次大会  2011.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 線状物体操作のための把持点および軌道決定手法 Domestic conference

    松野竜幸、若松栄史、森永英二、荒井栄司

    第29回日本ロボット学会学術講演会  2011.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 建築生産における多階層同時オークションを用いた工程管理手法の提案 Domestic conference

    若松栄史、森永英二、荒井栄司

    第55回システム制御情報学会研究発表講演会  2011.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • 平編み構造を有する繊維複合材料の力学解析に関する研究 Domestic conference

    山口遼太、若松栄史、森永英二、荒井栄司、藤田雄三、渡部祐樹、倉敷哲生、武内俊次

    日本繊維機械学会第64回年次大会  2011.05  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 平編み構造の斜行予測と抑制に関する研究 Domestic conference

    若松栄史、森永英二、荒井栄司、武内俊次

    日本繊維機械学会第64回年次大会  2011.05  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • Study on high heat proof protection thin film for Ag reflective films for LEDs International conference

    Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Eiji Morinaga, Shingo Kamo

    International Conference on Electronics Packaging 2011  2011.04 

     More details

    Presentation type:Poster presentation  

  • 需要変動を考慮した工場設備レイアウト設計に関する一考察 Domestic conference

    水本一生、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2011  2011.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 組立現場での工夫を考慮した公差設計に関する一考察 Domestic conference

    森永英二、塩谷景一、荒井栄司

    日本機械学会生産システム部門研究発表講演会2011  2011.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • 次世代システムLSIの階層型最適化手法に関する研究 Domestic conference

    村田秀則、岩田剛治、多屋淳志、安村孝成、佐藤了平、森永英二、岡本和也、工藤啓治、青山和浩、古賀毅

    第17回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2011.02 

     More details

    Presentation type:Poster presentation  

  • Ag系反射膜用高耐熱薄膜保護層に関する研究 Domestic conference

    宮川春彦、佐藤了平、岩田剛治、森永英二、加茂真吾

    第17回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2011.02 

     More details

    Presentation type:Poster presentation  

  • Study on thermal proof of SnO2 protection thin film for ultra high reflective film Ag system International conference

    Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Eiji Morinaga, Shingo Kamo

    The 43rd International Symposium on Microelectronics  2010.11 

     More details

    Presentation type:Poster presentation  

  • 製品設計における発想支援に関する研究 Domestic conference

    松下克則、森永英二、若松栄史、荒井栄司

    精密工学会2010年度関西地方定期学術講演会  2010.09 

     More details

    Presentation type:Poster presentation  

  • 加工方向と順序の自由度を考慮したフレキシブル加工工程設計支援の一手法 Domestic conference

    森永英二、山田昌幸、若松栄史、荒井栄司

    2010年度精密工学会秋季大会学術講演会  2010.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • ナノ薄膜制御による3次元LSI用超多点低温高耐熱接合方式の検討 Domestic conference

    森永英二、岡雄一、宮川春彦、佐藤了平、岩田剛治

    平成22年度溶接学会秋季全国大会  2010.09 

     More details

    Presentation type:Poster presentation  

  • 生産システム設計支援システムに関する研究 ―新規設計時と改良設計時における支援システムの機能の相違に関する検討― Domestic conference

    小池稔、若松栄史、森永英二、荒井栄司

    日本機械学会2010年度年次大会  2010.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • High heat proofing nano-layered film Cu wiring by crystal grain growth control International conference

    Haruhiko Miyagawa, Ryohei Satoh, Yoshiharu Iwata, Eiji Morinaga, Koji Nakagawa

    International Conference on Electronics Packaging 2010  2010.04 

     More details

    Presentation type:Poster presentation  

  • システムデザイン・インテグレーション手法と次世代半導体デバイスにおけるケーススタディ Domestic conference

    岩田剛治、多屋淳志、佐藤了平、森永英二、村田秀則、岡本和也、工藤啓治

    溶接学会第93回マイクロ接合研究委員会  2010.04 

     More details

    Presentation type:Poster presentation  

  • Study on system design / system integration method for system LSI International conference

    Hidenori Murata, Yoshiharu Iwata, Atsushi Taya, Ryohei Satoh, Eiji Morinaga, Kazuya Okamoto, Keiji Kudo, Kazuhiro Aoyama, Tsuyoshi Koga

    International Conference on Electronics Packaging 2010  2010.04 

     More details

    Presentation type:Poster presentation  

  • 不具合情報の共有と因果関係による工場設備メンテナンスに関する研究 Domestic conference

    出口幸太郎、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2010  2010.03  日本機械学会生産システム部門

     More details

    Presentation type:Poster presentation  

  • ジョブ・ショップにおける加工ロットの分割を考慮した生産スケジューリングに関する研究 第二報:ロット分割手法の定式化 Domestic conference

    陳北辰、若松栄史、森永英二、荒井栄司

    2010年度精密工学会春季大会学術講演会  2010.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 生産システム設計支援システムに関する研究 ―生産システム分類データベースに関する検討― Domestic conference

    小池稔、森永英二、若松栄史、荒井栄司

    2010年度精密工学会春季大会学術講演会  2010.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 次世代3次元LSI用超多点ナノ薄膜制御接続方式に関する研究 Domestic conference

    岡雄一、佐藤了平、森永英二、西森宏明、岩渕寿章、浅見博、岩田剛治

    第16回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2010.02 

     More details

    Presentation type:Poster presentation  

  • Cu系高耐熱ナノ多層薄膜配線の適正構造に関する研究 Domestic conference

    宮川春彦、佐藤了平、岩田剛治、森永英二、中川浩司

    第16回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2010.02 

     More details

    Presentation type:Poster presentation  

  • 次世代システムLSIのシステムデザイン・インテグレーション手法に関する研究 Domestic conference

    村田秀則、岩田剛治、多屋淳志、佐藤了平、森永英二、岡本和也、工藤啓治、青山和浩、古賀毅

    第16回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2010.02 

     More details

    Presentation type:Poster presentation  

  • 建築生産における工程管理システムアーキテクチャの提案 Domestic conference

    有吉主税、若松栄史、森永英二、荒井栄司

    第52回自動制御連合講演会  2009.11 

     More details

    Presentation type:Poster presentation  

  • Maintenance planning for individual houses based on cause-and-effect relationship International conference

    Eiji Arai, Hidefumi Wakamatsu, Eiji Morinaga

    The 6th International Conference on Ubiquitous Robots and Ambient Intelligence  2009.10 

     More details

    Presentation type:Poster presentation  

  • 設計情報・設計意図統合型CADの研究(第3報 部品間の影響関係記述による概念設計支援) Domestic conference

    妻屋彰、矢是秀明、森永英二、竹内一博、内田済、荒井栄司、田浦俊春

    日本機械学会第19回設計工学・システム部門講演会  2009.10  日本機械学会

     More details

    Presentation type:Poster presentation  

  • ネットワークを介した設備不具合情報の共有による工場設備メンテナンス手法に関する研究 Domestic conference

    出口幸太郎、森永英二、若松栄史、荒井栄司

    日本機械学会第19回設計工学・システム部門講演会  2009.10  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 次世代半導体デバイスにおけるシステムデザイン手法構築の基礎的検討 Domestic conference

    多屋淳志、岩田剛治、佐藤了平、森永英二、村田秀則、岡本和也、工藤啓治

    日本機械学会第19回設計工学・システム部門講演会  2009.10  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 大型溶接構造物の組立・搭載工程計画に関する研究 ―角度制約パターンと溶接組立工程との関係に対する考察― Domestic conference

    成願覚、若松栄史、森永英二、伊藤真介、岡野成威、望月正人、荒井栄司

    溶接学会平成21年度秋季全国大会  2009.09  溶接学会

     More details

    Presentation type:Poster presentation  

  • 柔軟・高効率な機械加工工程設計支援システムに関する研究 Domestic conference

    山田昌幸、森永英二、若松栄史、荒井栄司

    日本機械学会2009年度年次大会  2009.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 生産システム設計支援システムに関する研究 ―システムの必要性および設計要求の整理手法に関する検討― Domestic conference

    小池稔、若松栄史、森永英二、荒井栄司

    日本機械学会2009年度年次大会  2009.09  日本機械学会

     More details

    Presentation type:Poster presentation  

  • 概念的挙動・制約を満足する機構の導出支援に関する研究 Domestic conference

    若松邦茂、妻屋彰、森永英二、竹内一博、内田済、荒井栄司、田浦俊春

    2009年度精密工学会秋季大会学術講演会  2009.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • ジョブ・ショップにおける加工ロットの分割を考慮した生産スケジューリングに関する研究 Domestic conference

    陳北辰、若松栄史、森永英二、荒井栄司

    2009年度精密工学会秋季大会学術講演会  2009.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 次世代設計統合支援システムの機能実現に関する研究 Domestic conference

    原田真一郎、森永英二、妻屋彰、若松栄史、荒井栄司、竹内一博、内田済

    2009年度精密工学会秋季大会学術講演会  2009.09  精密工学会

     More details

    Presentation type:Poster presentation  

  • 線状物体のマニピュレーションにおける把持点決定手法 Domestic conference

    丸山剛史、若松栄史、森永英二、荒井栄司、平井慎一

    第27回日本ロボット学会学術講演会  2009.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • 薄板状物体のマニピュレーションのための変形シミュレーション Domestic conference

    浅野裕也、若松栄史、森永英二、荒井栄司、平井慎一

    第27回日本ロボット学会学術講演会  2009.09  日本ロボット学会

     More details

    Presentation type:Poster presentation  

  • Research on a method to derive an ideal 3DSiP International conference

    Atsushi Taya, Yoshiharu Iwata, Ryohei Satoh, Hidenori Murata, Eiji Morinaga, Keiji Kudo, Kazuya Okamoto

    The 59th IEEE Electrical Components and Technology Conference  2009.05 

     More details

    Presentation type:Poster presentation  

  • プロジェクトベース生産におけるプロジェクト選択に関する研究 Domestic conference

    小池稔、若松栄史、森永英二、荒井栄司

    第53回システム制御情報学会研究発表講演会  2009.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • ニット生地における斜行を含めた編み目形状のシミュレーション Domestic conference

    西条圭二、若松栄史、武内俊次、森永英二、荒井栄司

    日本繊維機械学会第62回年次大会  2009.05  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 大型溶接構造物の組立・搭載工程計画に関する研究 ―角度制約パターンによる溶接組立順序の絞り込み手法の提案― Domestic conference

    若松栄史、望月正人、成願覚、森永英二、伊藤真介、岡野成威、荒井栄司

    溶接学会平成21年度春季全国大会  2009.04  溶接学会

     More details

    Presentation type:Poster presentation  

  • 大型溶接構造物の組立・搭載工程計画に関する研究 ―船体ブロックの溶接変形予測― Domestic conference

    望月正人、若松栄史、長谷川雅丈、伊藤真介、岡野成威、森永英二、山下泰生、杉廣武俊

    溶接学会平成21年度春季全国大会  2009.04  溶接学会

     More details

    Presentation type:Poster presentation  

  • 因果関係に基づいた住宅個別のメンテナンス手法の提案 Domestic conference

    巽智亮、若松栄史、森永英二、妻屋彰、荒井栄司

    2009年度精密工学会春季大会学術講演会  2009.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 3D-SiPの適正構成予測手法に関する研究 Domestic conference

    多屋淳志、岩田剛治、森永英二、佐藤了平、村田秀則、岡本和也、工藤啓治

    第15回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2009.02 

     More details

    Presentation type:Poster presentation  

  • YAGレーザを用いたSnO2系導電薄膜の高速加工とその加工メカニズムに関する研究 Domestic conference

    臼井玲大、佐藤了平、岩田剛治、森永英二、寺田ルリ子、三原雄、礒野貴充、杉江隆一

    第15回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2009.02 

     More details

    Presentation type:Poster presentation  

  • 結晶粒成長制御によるCu系高耐熱ナノ多層薄膜配線形成に関する研究 Domestic conference

    宮川春彦、佐藤了平、岩田剛治、森永英二、中川浩司

    第15回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2009.02 

     More details

    Presentation type:Poster presentation  

  • 屈曲部を含む帯状物体のマニピュレーションのための変形シミュレーション Domestic conference

    若松栄史、森永英二、荒井栄司、平井慎一

    第9回計測自動制御学会システムインテグレーション部門講演会  2008.12  計測自動制御学会システムインテグレーション部門

     More details

    Presentation type:Poster presentation  

  • Management system architecture for project based production with use of RFID International conference

    Eiji Arai, Hidefumi Wakamatsu, Eiji Morinaga

    The 5th International Conference on Ubiquitous Robots and Ambient Intelligence  2008.11 

     More details

    Presentation type:Poster presentation  

  • A method of process parameter identification and resist profile design for thin-film pattern formation International conference

    Yutaka Matsuura, Eiji Morinaga, Hidefumi Wakamatsu, Eiji Arai

    The 7th International Conference on Machine Automation  2008.09 

     More details

    Presentation type:Poster presentation  

  • 設計情報・設計意図統合型CADの研究(第二報 挙動と形状を考慮した機構の分析) Domestic conference

    若松邦茂、妻屋彰、森永英二、竹内一博、原田真一郎、荒井栄司、田浦俊春

    日本機械学会第18回設計工学・システム部門講演会  2008.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • 設計情報・設計意図統合型CADの研究(第一報 次世代設計支援システムの必要機能に関する基礎的検討) Domestic conference

    原田真一郎、森永英二、妻屋彰、若松栄史、荒井栄司、竹内一博、若松邦茂

    日本機械学会第18回設計工学・システム部門講演会  2008.09  日本機械学会設計工学・システム部門

     More details

    Presentation type:Poster presentation  

  • Management system architecture for realizing dynamic scheduling in project based production International conference

    Eiji Arai, Hidefumi Wakamatsu, Akira Tsumaya, Yuta Matoba, Eiji Morinaga

    International Conference on Advances in Production Management Systems 2008  2008.09 

     More details

    Presentation type:Poster presentation  

  • Disassembly support system for used product considering destruction of their parts International conference

    Hidefumi Wakamatsu, Minoru Matsuishi, Eiji Morinaga, Eiji Arai

    The 7th International Conference on Machine Automation  2008.09 

     More details

    Presentation type:Poster presentation  

  • 薄膜パターン形成におけるレジスト断面形状設計の一手法 Domestic conference

    松浦豊、森永英二、若松栄史、荒井栄司

    日本機械学会生産システム部門研究発表講演会2008  2008.07 

     More details

    Presentation type:Poster presentation  

  • Mechanism and advanced application of rapid laser processing on SnO2 thin films for FPD Manufacture International conference

    Reo Usui, Yu Mihara, Eiji Morinaga, Yoshiharu Iwata, Ryohei Satoh

    Society for Information Display 2008 International Symposium  2008.05 

     More details

    Presentation type:Poster presentation  

  • 建築生産プロジェクトにおける動的管理手法の提案 Domestic conference

    若松栄史、的場雄太、森永英二、荒井栄司

    第52回システム制御情報学会研究発表講演会  2008.05  システム制御情報学会

     More details

    Presentation type:Poster presentation  

  • 編物におけるカーリング現象のシミュレーション Domestic conference

    西条圭二、若松栄史、森永英二、荒井栄司

    日本繊維機械学会第61回年次大会  2008.05  日本繊維機械学会

     More details

    Presentation type:Poster presentation  

  • 機械システムによる線状物体の結び操作計画と実行 Domestic conference

    藤山次郎、若松栄史、森永英二、荒井栄司

    2008年度精密工学会春季大会学術講演会  2008.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • 切断も考慮した使用済み製品の分解支援システムに関する研究 Domestic conference

    松石穂、若松栄史、森永英二、荒井栄司

    2008年度精密工学会春季大会学術講演会  2008.03  精密工学会

     More details

    Presentation type:Poster presentation  

  • YAGレーザによるSnO2系薄膜微細加工技術に関する研究 Domestic conference

    臼井玲大、佐藤了平、三原雄、岩田剛治、森永英二

    第14回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2008.02 

     More details

    Presentation type:Poster presentation  

  • 多層薄膜を用いた低温超微細接合のための基礎研究 Domestic conference

    西森宏明、佐藤了平、森永英二、岩田剛治

    第14回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2008.02 

     More details

    Presentation type:Poster presentation  

  • 次世代ディスプレイ用高耐熱ナノ多層薄膜配線形成に関する研究 Domestic conference

    宮川春彦、佐藤了平、岩田剛治、森永英二、中川浩司

    第14回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2008.02 

     More details

    Presentation type:Poster presentation  

  • リフトオフ法による薄膜パターン形成に向けた膜厚分布計算手法に関する研究 Domestic conference

    森永英二、佐藤了平、中川浩司、岩田剛治、荒井栄司、松浦豊、臼井玲大

    第14回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2008.02 

     More details

    Presentation type:Poster presentation  

  • ハイエンドSiPで必須になるグローバル配線の配線密度限の検討 Domestic conference

    岩田剛治、佐藤了平、森永英二、橋本美希

    関西ワークショップ2007  2007.07  エレクトロニクス実装学会

     More details

    Presentation type:Poster presentation  

  • Advanced application of direct laser process on SnO2 thin films for FPDs International conference

    Reo Usui, Yu Mihara, Eiji Morinaga, Yoshiharu Iwata, Ryohei Satoh

    Society for Information Display 2007 International Symposium  2007.05 

     More details

    Presentation type:Poster presentation  

  • Ta-doped SnO2 thin films for PDP International conference

    Yu Mihara, Ryohei Satoh, Reo Usui, Eiji Morinaga, Yoshiharu Iwata

    Society for Information Display 2007 International Symposium  2007.05 

     More details

    Presentation type:Poster presentation  

  • Research on next-generation manufacturing method of plasma display panels via lift-off process International conference

    Eiji Morinaga, Ryohei Satoh, Kouji Nakagawa, Haruhiko Miyagawa, Reo Usui, Yoshiharu Iwata

    Society for Information Display 2007 International Symposium  2007.05 

     More details

    Presentation type:Poster presentation  

  • レーザを用いたドライプロセスによる薄膜微細加工技術に関する研究 Domestic conference

    臼井玲大、佐藤了平、三原雄、森永英二、岩田剛治

    第13回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2007.02 

     More details

    Presentation type:Poster presentation  

  • 結晶性向上によるSnO2系透明薄膜電極の低抵抗化 Domestic conference

    三原雄、佐藤了平、臼井玲大、岩田剛治、森永英二、礒野貴充

    第14回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2007.02 

     More details

    Presentation type:Poster presentation  

  • エッチングレス方式による次世代ディスプレイ用ナノ多層薄膜パターン形成方法に関する研究 Domestic conference

    森永英二、佐藤了平、中川浩司、宮川春彦、岩田剛治

    第13回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2007.02 

     More details

    Presentation type:Poster presentation  

  • 環境にやさしい次世代ディスプレイ用配線構成に関する研究 Domestic conference

    並河愛子、佐藤了平、岩田剛治、森永英二、中川浩司

    第13回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2007.02 

     More details

    Presentation type:Poster presentation  

  • ディスプレイ用低抵抗SnO2薄膜形成に関する研究 Domestic conference

    三原雄、佐藤了平、臼井玲大、森永英二、岩田剛治

    第13回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2007.02 

     More details

    Presentation type:Poster presentation  

  • 次世代SiPに向けた高密度適正グローバル配線構造とその最適化 Domestic conference

    岩田剛治、佐藤了平、森永英二、橋本美希

    第16回マイクロエレクトロニクスシンポジウム  2006.09  エレクトロニクス実装学会

     More details

    Presentation type:Poster presentation  

  • High conductivity SnO2 thin films for flat panel displays International conference

    Takamitsu Isono, Takeshi Fukuda, Koji Nakagawa, Reo Usui, Ryohei Satoh, Eiji Morinaga, Yu Mihara

    Society for Information Display 2006 International Symposium  2006.05 

     More details

    Presentation type:Poster presentation  

  • Basic study of proper global wiring structure for advanced system in package International conference

    Yoshiharu Iwata, Shouhei Yasuda, Ryohei Satoh, Eiji Morinaga

    The 56th IEEE Electrical Components and Technology Conference  2006.05 

     More details

    Presentation type:Poster presentation  

  • 次世代SiPに向けた適正グローバル配線構造の基礎的検討第2報 Domestic conference

    岩田剛治、佐藤了平、森永英二、橋本美希

    第12回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2006.02 

     More details

    Presentation type:Poster presentation  

  • ディスプレイ用低抵抗SnO2薄膜形成に関する研究 Domestic conference

    礒野貴充、福田武司、佐藤了平、中川浩司、臼井玲大、三原雄、森永英二

    第12回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2006.02 

     More details

    Presentation type:Poster presentation  

  • レーザを用いたドライプロセスによる微細薄膜回路パターン形成技術に関する研究 Domestic conference

    臼井玲大、佐藤了平、岩田剛治、中川浩司、森永英二、高木悟

    第12回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2006.02 

     More details

    Presentation type:Oral presentation (general)  

  • 次世代ディスプレイ用電極の高耐熱ナノ薄膜システムの開発 Domestic conference

    中川浩司、佐藤了平、岩田剛治、臼井玲大、森永英二、並河愛子

    第12回「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム  2006.02 

     More details

    Presentation type:Oral presentation (general)  

  • Research on direct laser patterning of thin films for flat-panel display International conference

    Reo Usui, Ryohei Satoh, Yoshiharu Iwata, Koji Nakagawa, Eiji Morinaga, Satoru Takaki

    The 24th International Conference on Applications of Lasers and Electro-Optics  2005.11 

     More details

    Presentation type:Oral presentation (general)  

  • 区分的アフィンシステムのゲイン解析のための逐次アルゴリズム Domestic conference

    森永英二、平田研二

    計測自動制御学会第33回制御理論シンポジウム  2004.11 

     More details

    Presentation type:Oral presentation (general)  

  • 区分的二次な蓄積関数を用いた区分的アフィンシステムのL2ゲイン解析 Domestic conference

    森永英二、平田研二

    計測自動制御学会第3回制御部門大会  2003.05  計測自動制御学会制御部門

     More details

    Presentation type:Poster presentation  

  • 入力拘束を有する制御系の一クラスに対する性能解析 ~領域情報を陽に反映した区分的二次な蓄積関数の利用~ Domestic conference

    森永英二、平田研二

    第45回自動制御連合講演会  2002.11 

     More details

    Presentation type:Oral presentation (general)  

  • 入力拘束を持つ制御系の一性能解析法 ~領域情報を陽に反映した区分的二次な蓄積関数の構築~ Domestic conference

    森永英二、平田研二

    計測自動制御学会第31回制御理論シンポジウム  2002.10  計測自動制御学会

     More details

    Presentation type:Oral presentation (general)  

  • Analysis of control systems with input constraints using piecewise quadratic storage functions International conference

    Eiji Morinaga, Kenji Hirata, Yoshito Ohta

    The 4th Asian Control Conference  2002.09 

     More details

    Presentation type:Oral presentation (general)  

  • 入力拘束を持つ制御系の一性能解析法 ~区分的二次な蓄積関数の利用~ Domestic conference

    森永英二、平田研二、太田快人

    計測自動制御学会制御部門大会  2002.05  計測自動制御学会制御部門

     More details

    Presentation type:Oral presentation (general)  

  • 区分的二次な蓄積関数を用いた入力拘束を有する制御系の一性能解析法 Domestic conference

    森永英二、平田研二、太田快人

    計測自動制御学会関西支部シンポジウム  2001.11  計測自動制御学会関西支部

     More details

    Presentation type:Oral presentation (general)  

  • アンチワインドアップ制御系の一設計法に関する考察 Domestic conference

    片岡丈祥、森永英二、平田研二、太田快人

    第44回システム制御情報学会研究発表講演会  2000.05  システム制御情報学会

     More details

    Presentation type:Oral presentation (general)  

▼display all

Industrial Property Rights

  • 設計ワークフロー構築装置、設計ワークフロー構築方法、設計システム、設計方法、設計ワークフロー構築プログラムおよびそれを記録したコンピュータ読み取り可能な記録媒体

    岩田剛治,佐藤了平,工藤啓治,多屋淳志,岡本和也,村田秀則,渥美幸一郎,荒井栄司,森永英二

     More details

    property_type:Patent 

    Patent/Registration no:5170598 

  • 電子回路

    佐藤了平,森永英二,岡雄一,岩渕寿章,浅見博,西森宏明

     More details

    property_type:Patent 

    Patent/Registration no:5544465 

  • プラズマディスプレイパネルおよびその製造方法

    佐藤了平,岩田剛治,森永英二,宮川春彦,壬生隆,阿部勝男,太田敏彦

     More details

    property_type:Patent 

    Application no:2008-157093 

    Announcement no:2009-301953 

  • 電子回路装置とその製造方法

    佐藤了平,中川浩司,森永英二,臼井玲大,田中健治,高木悟,江畑研一,坂本寛

     More details

    property_type:Patent 

    Application no:2007-193567 

    Announcement no:2008-060552 

  • プラズマディスプレイパネルおよびその製造方法

    佐藤了平,森永英二,岩田剛治,宮川春彦,壬生隆

     More details

    property_type:Patent 

    Patent/Registration no:4892730 

  • 電子回路及びその製造方法

    佐藤了平,中川浩司,森永英二,臼井玲大,礒野貴充,田中健治,高木悟,江畑研一,坂本寛

     More details

    property_type:Patent 

    Patent/Registration no:4803726 

  • 回路パターン付き透明基板の製造方法

    佐藤了平,中川浩司,森永英二,臼井玲大,礒野貴充,田中健治,高木悟,江畑研一,坂本寛

     More details

    property_type:Patent 

    Patent/Registration no:5099616 

▼display all

Grant-in-Aid for Scientific Research

  • システムアーキテクチャ情報の統合化数理表現に基づくシステム最適化の自然原理の解明

    Grant-in-Aid for Scientific Research(C)  2024.04

  • システムアーキテクチャ情報の統合化数理表現に基づくシステム最適化の自然原理の解明

    Grant-in-Aid for Scientific Research(C)  2023.04

  • システムアーキテクチャ情報の統合化数理表現に基づくシステム最適化の自然原理の解明

    Grant-in-Aid for Scientific Research(C)  2022.04

  • スマート工場の適正運用に向けた自律分散型生産スケジューリングシステムの開発

    Grant-in-Aid for Scientific Research(C)  2020.04

  • スマート工場の適正運用に向けた自律分散型生産スケジューリングシステムの開発

    Grant-in-Aid for Scientific Research(C)  2019.04

  • スマート工場の適正運用に向けた自律分散型生産スケジューリングシステムの開発

    Grant-in-Aid for Scientific Research(C)  2018.04

  • スマート工場の運用に向けた自律分散型生産スケジューリング法の開発

    Grant-in-Aid for Young Scientists(B)  2017.04

  • スマート工場の運用に向けた自律分散型生産スケジューリング法の開発

    Grant-in-Aid for Young Scientists(B)  2016.04

  • スマート工場の運用に向けた自律分散型生産スケジューリング法の開発

    Grant-in-Aid for Young Scientists(B)  2015.04

  • 次世代ディスプレイ用SnO2系超低抵抗導電膜の研究

    Grant-in-Aid for Scientific Research(B)  2007

▼display all

Incentive donations / subsidies

  • 生産システムのフレキシブル運用に向けたデータ駆動型生産スケジューリング法の高性能化

    公益財団法人マザック財団  研究開発助成  2023

  • 生産システムのフレキシブル運用に向けたデータ駆動型生産スケジューリング法の開発

    公益財団法人マザック財団  研究開発助成  2020

  • フレキシブル生産のための機械加工工程と生産スケジュールの統合化設計法の開発

    公益財団法人マザック財団  研究開発助成  2015.04

  • 超分散型生産システムに対する生産スケジューリング手法の開発

    大阪大学 平成25年度萌芽的挑戦研究事業  2013

Charge of on-campus class subject

  • 学際情報学特別研究1

    2023   Intensive lecture   Graduate school

  • 学際情報学特別演習1

    2023   Intensive lecture   Graduate school

  • マネジメント学類特別演習

    2023   Intensive lecture   Undergraduate

  • マネジメント学類演習II

    2023   Weekly class   Undergraduate

  • マネジメント学類演習I

    2023   Weekly class   Undergraduate

  • マネジメント学インターンシップ

    2023   Intensive lecture   Undergraduate

  • 生産科学概論

    2023   Weekly class   Undergraduate

  • 学際情報学特別演習2

    2023   Intensive lecture   Graduate school

  • 学際情報学特別研究2

    2023   Intensive lecture   Graduate school

  • 生産科学特論

    2023   Weekly class   Graduate school

  • 学際情報学特別研究1

    2022   Intensive lecture   Graduate school

  • 学際情報学特別演習1

    2022   Intensive lecture   Graduate school

  • 基礎ゼミナールII

    2022   Weekly class   Undergraduate

  • 生産科学概論

    2022   Weekly class   Undergraduate

  • 生産科学特論

    2022   Weekly class   Graduate school

  • 学際情報学特別研究2 (中百舌鳥)

    2022   Intensive lecture   Graduate school

  • 学際情報学特別演習2 (中百舌鳥)

    2022   Intensive lecture   Graduate school

  • マネジメント学インターンシップ

    2022   Intensive lecture   Undergraduate

  • マネジメント学類演習I

    2022   Weekly class   Undergraduate

  • マネジメント学類演習II

    2022   Weekly class   Undergraduate

  • マネジメント学類特別演習

    2022   Intensive lecture   Undergraduate

  • Basic Studies Seminar I

    2021    

  • Basic Studies Seminar I

    2021    

  • Basic Studies Seminar I

    2021    

  • Special Seminar in Knowledge and Information Systems B

    2021    

  • Special Seminar in Knowledge and Information Systems A

    2021    

  • Adavanced Seminar in Management Science

    2021    

  • Internship in Management Science

    2021   Practical Training  

  • Graduation Thesis Project in Management Science II

    2021    

  • Graduation Thesis Project in Management Science II

    2021    

  • Basic Studies Seminar II

    2021    

  • Manufacturing Science

    2021    

  • Special Topics in Manufacturing Science

    2021    

  • Special Seminar in Knowledge and Information Systems B

    2020    

  • Special Seminar in Knowledge and Information Systems A

    2020    

  • Graduation Thesis Project in Management Science II

    2020    

  • Foreign Literature Seminar

    2020   Weekly class   Undergraduate

  • Basic Studies Seminar I

    2020   Weekly class   Undergraduate

  • Basic Studies Seminar I

    2020   Weekly class   Undergraduate

  • Basic Studies Seminar I

    2020   Weekly class   Undergraduate

  • Manufacturing Science

    2020   Weekly class   Undergraduate

  • Special Topics in Manufacturing Science

    2020   Weekly class   Graduate school

▼display all

Faculty development activities

  • 2014

     More details

    Fortran90/95による実践プログラミング 安田清和,水野正隆,小野英樹,佐藤和則,高嶋康人,高原渉,塚本雅裕,野村光,前田将克,松嶋道也,百瀬英毅,森永英二 大阪大学出版会

Academic Activities

  • システム/制御/情報

    2016.06 - 2018.05

  • システム制御情報学会論文誌

    2016.06 - 2018.05

  • Journal of Advanced Mechanical Design, Systems, and Manufacturing

    2014.04 - Now

  • 精密工学会誌

    2013.04 - Now

  • Precision Engineering誌

    2013.04 - Now