Updated on 2024/12/16

写真a

 
Ogawa Shinichiro
 
Organization
Graduate School of Engineering Division of Aerospace and Marine-System Engineering Assistant Professor
School of Engineering Department of Aerospace Engineering
Title
Assistant Professor
Affiliation
Institute of Engineering
Contact information
メールアドレス
Affiliation campus
Nakamozu Campus

Position

  • Graduate School of Engineering Division of Aerospace and Marine-System Engineering 

    Assistant Professor  2022.04 - Now

  • School of Engineering Department of Aerospace Engineering 

    Assistant Professor  2022.04 - Now

Degree

  • 博士(工学) ( Tohoku University )

  • 工学修士 ( Tohoku University )

  • 工学学士 ( Kanazawa Institute of Technology )

Research Areas

  • Frontier Technology (Aerospace Engineering, Marine and Maritime Engineering) / Aerospace engineering

Research Interests

  • 航空宇宙推進工学

  • Computational Fluid Dynamics

  • Scramjet Engine

  • Solid Rocket Motor

  • Ignition and Flame Holdings

  • Tunable Diode Laser Absorption Spectroscopy

  • Building Cube Method

  • Sustainable Aviation Fuel (SAF)

Research subject summary

  • Study on the Ignition and Flame Holdings in the Hypersonic Flow

  • 直交格子積み上げ法を用いたエンジン内部流れ場の数値流体解析手法の構築(スクラムジェットエンジン,固体燃料ロケット)

  • Development of Optical Measurement Techniques for Combustion Gases (TDLAS Method and BOS Method)

  • Production and Utilization of Aviation Biofuels

Professional Memberships

  • Gas Turbine Society of Japan

    2023.03 - Now   Domestic

  • Japan Explosives Society

    2021.08 - Now   Domestic

  • Combustion Society of Japan

    2018.06 - Now   Domestic

  • American Institute of Aeronautics and Astronautics

    2018.04 - Now   Overseas

  • The Combustion Institute

    2018.04 - Now

  • The Japan Society for Aeronautical and Space Sciences

    2016.05 - Now   Domestic

  • The Japan Society of Mechanical Engineers

    2016.02 - Now   Domestic

▼display all

Committee Memberships (off-campus)

  • 幹事   日本航空宇宙学会 関西支部  

    2023.04 - Now 

  • 代表   日本航空宇宙学会関西支部 研究分科会「若手研究者のための航空宇宙分野横断」  

    2023.04 - Now 

Awards

  • ポスター賞

    2022   大阪公立大学   大阪公立大学工学研究科記念シンポジウム

  • グローバル萩博士学生奨学金

    2018   東北大学  

  • 学長表彰

    2016   金沢工業大学  

Papers

  • Development of simultaneous TDLAS and BOS techniques for enhanced accuracy in combustion gas temperature measurements Reviewed

    Shinichiro Ogawa, Masayuki Kido, Yuya Hirayama

    Experiments in Fluids   65 ( 12 )   2024.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: 10.1007/s00348-024-03920-y

  • Development of a Radial Injection Flow Model of a Cylinder Simulating a Solid Rocket Motor Geometry using the Building-Cube Method Reviewed

    Shinichiro Ogawa, Daisuke Sasaki

    TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES   67 ( 6 )   307 - 317   2024.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: 10.2322/tjsass.67.307

  • Mechanisms of ignition and combustion instability in a scramjet combustor with micro-rocket torch using dynamic mode decomposition Reviewed

    Shinichiro Ogawa

    Physics of Fluids   36 ( 10 )   106123   2024.10

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: 10.1063/5.0228287

  • Study on Combustion Characteristics of Coconut SAF Using Micro Jet Engine Reviewed

    Shinichiro Ogawa, Koichi Mori, Yasuaki Maeda

    International Journal of Gas Turbine, Propulsion and Power Systems   15 ( 5 )   v15n5tp06   2024.10

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: 10.38036/jgpp.15.5_v15n5tp06

  • Forced ignition modeling of methane-ethylene mixtures in scramjet combustors Reviewed

    Shinichiro Ogawa, Kan Kobayashi, Sadatake Tomioka

    Combustion and Flame   263   113383   2024.05

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    To propose a design guideline for a scramjet combustor at low cost, an ignition model for a scramjet combustor is required. Therefore, the overall aim of this study was to propose an ignition model that could be used to estimate the forced ignition limits within a cavity. In this study, we developed two forced ignition models (FIMs): the forced ignition model in the recirculating zone (FIMR) and the forced ignition model in the shear layer (FIMS). We evaluated the forced ignition limits using a micro-rocket torch within a scramjet combustor. The validated results of the FIMs indicated that the modified FIMR incorporating cavity refresh time (defined as the time required for complete replacement of all gases in the cavity) was the most appropriate method for calculating the forced ignition limit within the recirculation zone. However, in the case of Φ2.0 + 50 % He torch, the modified FIMR could not precisely estimate the forced ignition limit, showing that further modification to the present prediction model was necessary. The forced ignition process in the cavity was investigated using OH* chemiluminescence images, which indicated that the fuel mixture ignited in the shear layer; therefore, it was necessary to investigate ignition not only within the recirculation zone but also in the shear layer. In the case of Φ2.0 + 50 % He torch, the forced ignition limit could not be predicted by the FIMR, but it could be predicted by the FIMS. These results demonstrate that the FIMS provides improved prediction accuracy for the forced ignition limit in the scramjet combustors.

    DOI: https://doi.org/10.1016/j.combustflame.2024.113383

  • Modal Analysis of Forced Ignition Characteristics using Micro-Rocket Torch in Supersonic Flow Reviewed

    Shinichiro Ogawa

    TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES   67 ( 2 )   43 - 51   2024.03

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)   International / domestic magazine:International journal  

    DOI: https://doi.org/10.2322/tjsass.67.43

  • Development of combustion gas measurement systems for micro-rocket torch using a diode laser sensor Reviewed

    Yuya Hirayama, Shinichiro Ogawa

    Mechanical Engineering Letters   9   2023.08( ISSN: 2189-5236

     More details

    Authorship:Corresponding author   Publishing type:Research paper (scientific journal)  

    DOI: https://doi.org/10.1299/mel.23-00261

  • Three-Dimensional Fluid Analysis for Internal Flow of a Solid Rocket Motor with Nozzle Using Building-Cube Method Reviewed

    Shinichiro Ogawa, Kentaro Ouchi, Daisuke Sasaki

    AEROSPACE TECHNOLOGY JAPAN, THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES   22   1 - 10   2023.01

     More details

    Authorship:Lead author   Publishing type:Research paper (scientific journal)  

    DOI: 10.2322/astj.22.1

  • Study on the Ignition Method for n-Octane Pyrolysis Fuel in a Scramjet Engine Reviewed

    Shinichiro Ogawa, Kan Kobayashi, Sadatake Tomioka

    Transaction of the Japan Society for Aeronautical and Space Sciences 雑誌   65 ( 1 )   33 - 43   2022.01

     More details

    Kind of work:Joint Work  

  • An Experimental Investigation on Forced Ignition Characteristics of Hydrocarbon Mixture Fuel in Scramjet Combustor Reviewed

    Shinichiro Ogawa, Kan Kobayashi, Sadatake Tomioka

    Lecture Notes in Electrical Engineering   913   1381 - 1395   2022( ISBN:978-981192634-1

     More details

    Authorship:Lead author   Publishing type:Research paper (international conference proceedings)  

    DOI: 10.1007/978-981-19-2635-8_98

  • 化学反応解析を用いたメタン/エチレン混合気体の着火遅れ時間に関する検討 Reviewed

    小川秦一郎,富岡定毅,小林完

    日本航空宇宙学会論文集 雑誌   66 ( 4 )   2018.08

     More details

    Kind of work:Joint Work  

  • Two-dimensional computational fluid dynamics analysis of internal flow in a simplified solid rocket motor combustion chamber Reviewed

    Shinichiro Ogawa, Daisuke Sasaki

    Journal of Fluid Science and Technology 雑誌   12 ( 3 )   2017.12

     More details

    Kind of work:Joint Work  

▼display all

MISC

  • Numerical Analysis of Internal Flow Field in an Aerospace Propulsion Using the Building-Cube Method

    Shinichiro Ogawa, Daisuke Sasaki

    JAXA Supercomputer System Annual Report 2023   2024.09

     More details

    Publishing type:Internal/External technical report, pre-print, etc.  

  • 直交格子積み上げ法を用いたラバールノズル内流れの数値解析

    小川秦一郎,笹岡佑全,佐々木大輔,吉永翔哉,吉田啓史郎

    宇宙航空研究開発機構特別資料・第4回直交格子CFDワークショップ講演集   JAXA-SP-23-008   2024.01

     More details

    Authorship:Lead author   Publishing type:Lecture material (seminar, tutorial, course, lecture, etc.)  

  • Evaluation of Exhaust Gas from Micro-Jet Engine using SAF Made from Coconut International journal

    Shinichiro Ogawa, Takuto Hongo, Koichi Mori, Yasuaki Maeda, Nguyen H. Uyen

    AIAA SCITECH 2024 Forum   2024.01

     More details

    Authorship:Lead author   Publishing type:Research paper, summary (international conference)   International / domestic magazine:International journal  

    DOI: https://doi.org/10.2514/6.2024-0105

  • Effect of Burning Surface Regression on Internal Flow Field in Solid Rocket Motor International journal

    Shinichiro Ogawa, Daisuke Sasaki, Shoya Yoshinaga

    AIAA SCITECH 2024 Forum   2024.01

     More details

    Authorship:Lead author   Publishing type:Research paper, summary (international conference)   International / domestic magazine:International journal  

    DOI: https://doi.org/10.2514/6.2024-0213

  • Dynamic Mode Decomposition of the Combustion Flow Field in a Scramjet Combustor with a Cavity Flameholder International journal

    Shinichiro Ogawa

    AIAA AVIATION 2023 Forum   2023.06

     More details

    Authorship:Lead author   Publishing type:Research paper, summary (international conference)   International / domestic magazine:International journal  

    DOI: https://doi.org/10.2514/6.2023-3787

  • 直交格子積み上げ法を用いた航空宇宙推進機関の内部流れ場の数値解析

    小川秦一郎,佐々木大輔

    JAXAスーパーコンピュータシステム利用成果報告 2022   2023.06

     More details

    Authorship:Lead author   Publishing type:Internal/External technical report, pre-print, etc.  

  • Development of Wall Injection Model for Solid Rocket Motor Internal Flow by Block-Structure Cartesian Mesh International journal

    Shinichiro Ogawa, Daisuke Sasaki

    AIAA SCITECH 2023 Forum   2023.01

     More details

    Authorship:Lead author   Publishing type:Research paper, summary (international conference)   International / domestic magazine:International journal  

    DOI: https://doi.org/10.2514/6.2023-1131

  • 直交格子積み上げ法を用いた航空宇宙推進機関の内部流れ場の数値解析

    小川秦一郎,佐々木大輔

    JAXAスーパーコンピュータシステム利用成果報告 2021   2022.08

     More details

    Authorship:Lead author   Publishing type:Internal/External technical report, pre-print, etc.  

▼display all

Presentations

  • 環境に優しいジェットエンジンの実現に向けたバイオ燃料の開発 Domestic conference

    小川秦一郎

    第11回大阪公立大学&和歌山大学 工学研究シーズ 合同発表会  2024.12 

     More details

    Presentation type:Oral presentation (general)  

  • Investigation of the Combustion Characteristics of the Micro-rocket Torch Domestic conference

    Yuya Hirayama;Shinichiro Ogawa;Yuki Yabiku

    The 62nd Symposium (Japanese) on Combustion  2024.11 

     More details

    Presentation type:Oral presentation (general)  

  • Investigation of Combustion Characteristics in a Micro Jet Engine Using Different Biofuels Domestic conference

    Shinichiro Ogawa;Takuto Hongo;Yasuaki Maeda;Huynh Phuong Uyen Nguyen;Koichi Mori

    The 62nd Symposium (Japanese) on Combustion  2024.11 

     More details

    Presentation type:Oral presentation (general)  

  • Evaluation of the effect of wall regression on internal flow field of star grain solid rocket motor using numerical analysis International conference

    Shinichiro Ogawa, Loup Maël Agulles, Daisuke Sasaki, Shoya Yoshinaga

    The 8th International Symposium on Energetic Materials and their Applications  2024.11 

     More details

    Presentation type:Oral presentation (general)  

  • Development of Background Oriented Schlieren Measurement Technique for Cylindrical Combustion Flow International conference

    Yuya Hirayama;Masayuki Kido;Yuki Yabiku;Shinichiro Ogawa

    Twenty-first International Conference on Flow Dynamics (ICFD)  2024.11 

     More details

    Presentation type:Poster presentation  

  • Study on Heat Flux Prediction Method for Cartesian-Mesh CFD under Supersonic Flows International conference

    Daisuke Sasaki;Mio Yukimitsu;Shinichiro Ogawa;Shoya Yoshinaga;Hideki Moriai;Shun Takahashi;Aiko Yakeno;Shigeru Obayashi

    Twenty-first International Conference on Flow Dynamics (ICFD)  2024.11 

     More details

    Presentation type:Poster presentation  

  • Development and Environmental Assessment of Sustainable Aviation Fuel Using Co-Solvent Method International conference

    Shinichiro Ogawa;Takuto Hongo;Koichi Mori;Yasuaki Maeda;Huynh Phuong Uyen Nguyen

    Asia-Pacific International Symposium on Aerospace Technology 2024  2024.10 

     More details

    Presentation type:Oral presentation (general)  

  • Enhanced Accuracy in Combustion Gas Temperature Measurements Using Integrated TDLAS and BOS Techniques International conference

    Shinichiro Ogawa;Yuya Hirayama;Masayuki Kido

    Asia-Pacific International Symposium on Aerospace Technology 2024  2024.10 

     More details

    Presentation type:Oral presentation (general)  

  • Comparison of Combustion Characteristics of Fatty Acid Ethyl Ester and Fatty Acid Methyl Ester in Micro Jet Engine Domestic conference

    Takuto Hongo;Shinichiro Ogawa;Koichi Mori;Yasuaki Maeda;Huynh Phuong;Uyen Nguyen

    52nd Regular Lecture Meeting of the Gas Turbine Society of Japan  2024.10 

     More details

    Presentation type:Oral presentation (general)  

  • 共溶媒法を用いて製造した持続可能な航空燃料(SAF)の排ガス成分の検討 Domestic conference

    小川秦一郎,本郷拓大,森浩一,前田泰昭,Nguyen H. P. Uyen

    第34回環境工学総合シンポジウム2024  2024.07 

     More details

    Presentation type:Oral presentation (general)  

  • 直交格子積み上げ法を用いた航空宇宙用エンジン内部流れ場の大規模数値解析手法の開発 Domestic conference

    小川秦一郎

    第16回JHPCNシンポジウム  2024.07 

     More details

    Presentation type:Poster presentation  

  • Development of BOS Measurement Methods for Micro-Rocket Torch Combustion Gas International conference

    Yuya Hirayama, Shinichiro Ogawa, Yuki Yabiku, Masayuki Kido

    TSINGHUA-PRINCETON-COMBUSTION INSTITUTE 2024 SUMMER SCHOOL ON COMBUSTION  2024.07 

     More details

    Presentation type:Poster presentation  

  • IB法を適用した直交格子積み上げ法を用いた内部流れ場の解析の現状と課題 Domestic conference

    小川秦一郎,Agulles Loup Mael,佐々木大輔,吉永翔哉,吉田啓史郎

    第56回流体力学講演会/第42回航空宇宙数値シミュレーション技術シンポジウム  2024.07 

     More details

    Presentation type:Oral presentation (general)  

  • Numerical Analysis of Fuel Injection in Supersonic Flow Using Building-Cube Method Domestic conference

    Shinichiro Ogawa, Daisuke Sasaki

    56th Fluid Mechanics Conference / 42nd Aerospace Numerical Simulation Technology Symposium  2024.07 

     More details

    Presentation type:Oral presentation (general)  

  • Verification of the Usefulness of Coconut SAF using Micro Jet Engine Domestic conference

    Takuto Hongo, Shinichiro Ogawa, Koichi Mori, Yasuaki Maeda

    63rd Aerospace Engine and Space Propulsion Conference  2024.03 

     More details

    Presentation type:Oral presentation (general)  

  • Development of Production Technologies for SAF and BDF as Effective Climate Change Mitigation Measures International conference

    Yasuaki Maeda, Nguyen Huynh Phuong Uyen, Naofumi Okuda, Shinichiro Ogawa, Koichi Mori, Norimichi Takeda

    F+L WEEK 2024  2024.03 

     More details

    Presentation type:Poster presentation  

  • Effect of Burning Surface Regression on Internal Flow Field in Solid Rocket Motor International conference

    Shinichiro Ogawa, Daisuke Sasaki, Shoya Yoshinaga

    AIAA SCITECH 2024 Forum  2024.01 

     More details

    Presentation type:Oral presentation (general)  

    DOI: 10.2514/6.2024-0213

  • Evaluation of Exhaust Gas from Micro-Jet Engine using SAF Made from Coconut International conference

    Shinichiro Ogawa, Takuto Hongo, Koichi Mori, Yasunaga Maeda, Nguyen H. Uyen

    AIAA SCITECH 2024 Forum  2024.01 

     More details

    Presentation type:Oral presentation (general)  

    DOI: 10.2514/6.2024-0105

  • Study on Combustion Characteristics of Coconut SAF Using Micro Jet Engine International conference

    Shinichiro Ogawa, Koichi Mori, Yasuaki Maeda

    International Gas Turbine Congress 2023  2023.11 

     More details

    Presentation type:Oral presentation (general)  

  • 背景型シュリーレン法を用いたマイクロロケットトーチ燃焼ガスの計測手法の構築 Domestic conference

    木戸真之,小川秦一郎,森浩一

    第60回日本航空宇宙学会関西・中部支部合同秋期大会  2023.11 

     More details

    Presentation type:Oral presentation (general)  

  • Development of Measurement Method for Micro-Rocket Torch Flame by Tunable Diode Laser Absorption Domestic conference

    Yuya Hirayama, Shinichiro Ogawa

    The 61st Symposium (Japanese) on Combustion  2023.11 

     More details

    Presentation type:Oral presentation (general)  

  • Study on Heat Flux Prediction Method for Cartesian-Mesh CFD under Supersonic Flows International conference

    Daisuke Sasaki, Kentaro Miyata, Shinichiro Ogawa, Koichi Mori, Kumpei Abe, Shoya Yoshinaga, Hideki Moriai, Shun Takahashi, Aiko Yakeno, Shigeru Obayashi

    20th International Conference on Flow Dynamics  2023.11 

     More details

    Presentation type:Poster presentation  

  • Development of Numerical Analysis Method for Cavity Flame-Holder in Supersonic Flow using Building-Cube Method International conference

    Kentaro Miyata, Shinichiro Ogawa, Daisuke Sasaki, Koichi Mori

    20th International Conference on Flow Dynamics  2023.11 

     More details

    Presentation type:Poster presentation  

  • Numerical Analysis of Internal Flowfield in Star-Shaped Grains using Building-Cube Method International conference

    Shoya Yoshinaga, Keishiro Yoshida, Shinichiro Ogawa, Daisuke Sasaki

    20th International Conference on Flow Dynamics  2023.11 

     More details

    Presentation type:Poster presentation  

  • IB法を用いた星型グレインからの流れ場の解析 Domestic conference

    吉永翔哉、吉田啓史郎、小川秦一郎、佐々木大輔

    第36回計算力学講演会  2023.10 

     More details

    Presentation type:Oral presentation (general)  

  • Numerical Analysis of Internal Flow in Laval Nozzle Using Building-Cube Method Domestic conference

    Shinichiro Ogawa, Yuzen Sasaoka, Daisuke Sasaki, Syoya Yoshinaga, Keishiro Yoshida

    55th Fluid Dynamics Conference/ 41st Aerospace Numerical Simulation Symposium  2023.07 

     More details

    Presentation type:Oral presentation (general)  

  • Validation Analysis of Internal Flowfield Inside a Cavity in a Supersonic Flow using the Building-Cube Method Domestic conference

    Kentaro Miyata, Shinichiro Ogawa, Daisuke Sasaki, Koichi Mori

    55th Fluid Dynamics Conference/ 41st Aerospace Numerical Simulation Symposium  2023.07 

     More details

    Presentation type:Oral presentation (general)  

  • Dynamic Mode Decomposition of the Combustion Flow Field in a Scramjet Combustor with a Cavity Flameholder

    Shinichiro Ogawa

    AIAA AVIATION 2023 Forum  2023.06 

     More details

    Presentation type:Oral presentation (general)  

    DOI: https://doi.org/10.2514/6.2023-3787

  • Study on Accuracy Improvement of a Forced Ignition Model Focused on Micro-Rocket Torch

    Shinichiro Ogawa, Yuya Hirayama, Masayuki Kido

    The 34th International Symposium on Space Technology and Science  2023.06 

     More details

    Presentation type:Oral presentation (general)  

  • Study on Improvement of Measurement Accuracy of Torch Igniter Flame by TDLAS Method Domestic conference

    Yuya Hirayama, Shinichiro Ogawa, Koichi Mori, Masayuki Kido

    JSASS Northern Branch 2023 Annual Meeting and the 4th Symposium on Reusable Space  2023.03 

     More details

    Presentation type:Oral presentation (general)  

  • Modal Analysis of Forced Ignition Characteristics by Micro-Rocket Torch in Supersonic Flow International conference

    Shinichiro Ogawa

    The 11th Asian Joint Conference on Propulsion and Power  2023.03 

     More details

    Presentation type:Oral presentation (general)  

  • Investigation of Flowfield from Star-Shaped Grains using Building-Cube Method Domestic conference

    Shoya Yoshinaga, Daisuke Sasaki, Shinichiro Ogawa

    The Japan Society of Mechanical Engineers Hokuriku-Shinetsu Branch 2023 Congruence Conference  2023.03 

     More details

    Presentation type:Oral presentation (general)  

  • Development of Wall Injection Model for Solid Rocket Motor Internal Flow by Block-Structure Cartesian Mesh International conference

    Shinichiro Ogawa, Daisuke Sasaki

    AIAA SCITECH 2023 Fourm  2023.01  American Institute of Aeronautics and Astronautics

     More details

    Presentation type:Oral presentation (general)  

    Venue:National Harbor, MD & Online  

    DOI: 10.2514/6.2023-1131

  • Development of Wall Injection Model for Solid Rocket Motor Propellant using Immersed Boundary Method Domestic conference

    Shinichiro Ogawa, Daisuke Sasaki

    36th Computational Fluid Dynamics Symposium  2022.12 

     More details

    Presentation type:Oral presentation (general)  

  • OH*自発光計測によるスクラムジェット燃焼器内の強制着火過程に関する研究 Domestic conference

    木戸真之,小川秦一郎,森浩一

    第60回燃焼シンポジウム  2022.11 

     More details

    Presentation type:Poster presentation  

  • モード解析を用いた超音速流れ場におけるキャビティ内の強制着火過程の検討 Domestic conference

    小川秦一郎

    第60回燃焼シンポジウム  2022.11 

     More details

    Presentation type:Oral presentation (general)  

  • Development of a BCM Solver for Internal Flow in Supersonic using the IB Method International conference

    Kentaro Miyata, Shinichiro Ogawa, Koichi Mori, Daisuke Sasaki

    19th International Conference on Flow Dynamics  2022.11 

     More details

    Presentation type:Poster presentation  

  • Study on Heat Flux Prediction Method for Cartesian-Mesh CFD Under Supersonic Flows International conference

    Daisuke Sasaki, Kumpei Abe, Hideki Moriai, Shun Takahashi, Gouji Yamada, Shinichiro Ogawa, Koichi Mori, Shigeru Obayashi, Koji Shimoyama

    19th International Conference on Flow Dynamics  2022.11 

     More details

    Presentation type:Poster presentation  

  • 直交格子積み上げ法を用いたキャビティ付き固体燃料ロケット内部流れの流体解析手法の構築 Domestic conference

    小川秦一郎, 大内健太郎, 佐々木大輔

    第54回流体力学講演会/第40回航空宇宙数値シミュレーション技術シンポジウム  2022.06  日本航空宇宙学会

     More details

    Presentation type:Oral presentation (general)  

  • OH自発光計測画像の解析によるスクラムジェット燃焼器内の着火・保炎の研究 Domestic conference

    木戸真之,小川秦一郎,森浩一

    日本機械学会 2021年度学生会卒業研究発表講演会  2022.03 

     More details

    Presentation type:Oral presentation (general)  

  • 直交格子を用いた超音速流中の2次元キャビティ流れの解析 Domestic conference

    宮田健太郎,小川秦一郎,森浩一,佐々木大輔

    日本機械学会 2021年度学生会卒業研究発表講演会  2022.03 

     More details

    Presentation type:Oral presentation (general)  

  • Forced Ignition Modeling of Hydrocarbon Mixture Fuel in Scramjet Combustors International conference

    Shinichiro Ogawa, Kan Kobayashi, Sadatake Tomioka

    13th Asian-Pacific Conference on Combustion 2021  2021.12 

     More details

    Presentation type:Oral presentation (general)  

  • An Experimental Investigation on Forced Ignition Characteristics of Hydrocarbon Mixture Fuel in Scramjet Combustor International conference

    Shinichiro Ogawa, Kan Kobayashi, Sadatake Tomioka

    2021 Asian-Pacific International Symposium on Aerospace Technology  2021.11 

     More details

    Presentation type:Oral presentation (general)  

  • n-ドデカン熱分解成分の着火特性に関する研究 Domestic conference

    小川秦一郎,栗原航,小林完,富岡定毅

    第57回燃焼シンポジウム  2019.11 

     More details

    Presentation type:Oral presentation (general)  

  • Influence of temperature and mixture gas ratio to autoignition of N-octane pyrolysis gas International conference

    Shinichiro Ogawa, Takuto Miyaura, Kan Kobayashi, Sadatake Tomioka

    AIAA Propulsion and Energy Forum and Exposition, 2019  2019.08 

     More details

    Presentation type:Oral presentation (general)  

  • Study on Autoignition of Thermally Cracked Components of n-Octane International conference

    Shinichiro Ogawa, Takuto Miyaura, Kan Kobayashi, Sadatake Tomioka

    32nd International Symposium on Space Technology and Science  2019.06 

     More details

    Presentation type:Oral presentation (general)  

  • 衝撃波管を用いたメタン/エチレン混合気体の混合割合の違いによる着火特性の検討 Domestic conference

    小川秦一郎,小林完,富岡定毅

    平成30年度衝撃波シンポジウム  2019.03 

     More details

    Presentation type:Oral presentation (general)  

  • オクタン熱分解成分の着火特性に関する検討 Domestic conference

    小川秦一郎,宮浦拓人,志牟田晃大,富岡定毅

    第56回燃焼シンポジウム  2018.11 

     More details

    Presentation type:Oral presentation (general)  

  • Influence on ignition characteristic by the difference of methane/ethylene mixture gas rate International conference

    Shinichiro Ogawa, Kiyoshi Nojima, Kan Kobayashi, Sadatake Tomioka

    2018 Joint Propulsion Conference  2018.07 

     More details

    Presentation type:Oral presentation (general)  

  • 炭化水素系ガス燃料の着火特性 Domestic conference

    小林完,小川秦一郎,野島清志,富岡定毅

    平成29年度宇宙輸送シンポジウム  2018.03 

     More details

    Presentation type:Oral presentation (general)  

  • Study on Ignition Delay of Methane/Ethylene/Heptane Mixture Gas Using Chemical Reaction Analysis International conference

    Shinichiro Ogawa, Sadatake Tomioka, Kan Kobayashi

    9th The Asian Joint Conference on Propulsion and Power  2018.03 

     More details

    Presentation type:Oral presentation (general)  

  • 化学反応解析を用いたメタン/エチレン 混合気体の着火遅れ時間に関する検討 Domestic conference

    小川秦一郎,富岡定毅,小林完,野島清志

    日本航空宇宙学会北部支部2017年講演会  2017.03 

     More details

    Presentation type:Oral presentation (general)  

  • Application of immersed boundary method with wall injection for solid rocket motor internal flow International conference

    Takuya Hirose, Shinichiro Ogawa, Daisuke Sasaki, Yuma Fukushima, Shigeru Obayashi

    AIAA Modeling and Simulation Technologies Conference  2017.01 

     More details

    Presentation type:Oral presentation (general)  

  • Two-Dimensional Computational Fluid Dynamics Analysis of Internal Flow in a Simplified Solid Rocket Motor Combustion Chamber International conference

    Shinichiro Ogawa, Takuya Hirose, Masaki Koike, Daisuke Sasaki

    13th International Conference on Flow Dynamics  2016.10 

     More details

    Presentation type:Poster presentation  

  • Cartesian Mesh CFD Solver for Solid Rocket Motor Internal Flow with Wall Injection International conference

    Takuya Hirose, Shinichiro Ogawa, Daisuke Sasaki, Yuma Fukushima, Shigeru Obayashi

    Asian Pacific International Symposium on Aerospace Technology 2016  2016.10 

     More details

    Presentation type:Oral presentation (general)  

  • 直交格子積み上げ法によるTaylor Flowの2次元CFD解析 Domestic conference

    小川秦一郎,廣瀬拓也,小池雅輝,佐々木大輔

    流体力学講演会/航空宇宙数値シミュレーション技術シンポジウム講演集  2016.07 

     More details

    Presentation type:Poster presentation  

  • 直交格子法による翼列流れの数値解析に向けた基礎研究 Domestic conference

    小池雅輝,小川秦一郎,佐々木大輔,三坂孝志,福島裕馬,大林茂

    日本機械学会北陸信越支部総会  2016.03 

     More details

    Presentation type:Oral presentation (general)  

▼display all

Grant-in-Aid for Scientific Research

  • Development and optimum design of low NOx technology for igniters for scramjet combustors

    Grant-in-Aid for Early-Career Scientists  2025

  • Development and optimum design of low NOx technology for igniters for scramjet combustors

    Grant-in-Aid for Early-Career Scientists  2024

  • スクラムジェット燃焼器用の点火器の低NOx化技術の開発と最適設計

    Grant-in-Aid for Early-Career Scientists  2023

Joint research

  • 直交格子による超音速/極超音速下における熱流束予測

    東北大学流体科学研究所  東北大学流体科学研究所令和4年度公募共同研究  2022

Incentive donations / subsidies

  • 直交格子積み上げ法を用いた燃焼に伴う固体燃料壁面後退モデルの開発と圧力振動の解明

    公益財団法人火薬工業技術奨励会  2023

  • スクラムジェットエンジン用点火器の強制着火モデル構築と最適設計

    公益財団法人JKA  2022年度小型自動車等機械振興事業  2022

Other subsidies, etc.

  • 気候変動緩和策として有効なSAF(再生可能航空燃料)の製造・利用

    大阪イノベーション創出支援補助金  2023

Original item・Special report (Research Activity)

  • 2023

     More details

    Original item:The 20th International Conference on Flow Dynamics - Best Presentation Award for Student Session

    Special report:OS21-40:“Development of Numerical Analysis Method for Cavity Flame Holder in Supersonic Flow Using Building-Cube Method”
    Kentaro Miyata, Shinichiro Ogawa, Daisuke Sasaki, Koichi Mori (Osaka Metropolitan University, Japan)

Charge of on-campus class subject

  • 航空宇宙工学実験1

    2024   Weekly class   Undergraduate

  • 航空宇宙工作実習

    2024   Weekly class   Undergraduate

  • 航空宇宙工学基礎1

    2024   Weekly class   Undergraduate

  • 航空宇宙工学特論

    2024   Weekly class   Graduate school

  • 航空宇宙海洋系特別研究第1

    2024   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別演習第1

    2024   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別演習

    2024   Intensive lecture   Graduate school

  • 航空宇宙工学基礎1

    2023   Weekly class   Undergraduate

  • 航空宇宙工学特論

    2023   Weekly class   Graduate school

  • 航空宇宙海洋系特別研究第1

    2023   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別演習第1

    2023   Intensive lecture   Graduate school

  • 航空宇宙工学実験I

    2023   Weekly class   Undergraduate

  • 機械工作実習

    2023   Weekly class   Undergraduate

  • 航空宇宙海洋系特別演習

    2023   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別研究

    2023   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別研究第2

    2023   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別演習第2

    2023   Intensive lecture   Graduate school

  • 航空宇宙工学演習IV

    2023   Weekly class   Undergraduate

  • 航空宇宙工学実験II

    2023   Weekly class   Undergraduate

  • 機械工作実習

    2022   Weekly class   Undergraduate

  • 航空宇宙海洋系特別演習

    2022   Intensive lecture   Graduate school

  • 航空宇宙海洋系特別演習第1

    2022   Intensive lecture   Graduate school

  • 航空宇宙工学特論

    2022   Weekly class   Graduate school

  • 航空宇宙海洋系特別演習第2 (航空宇宙工学分野)

    2022   Intensive lecture   Graduate school

  • 航空宇宙工学基礎1

    2022   Weekly class   Undergraduate

  • 航空宇宙工学実験I

    2022   Weekly class   Undergraduate

  • 航空宇宙工学演習IV

    2022   Weekly class   Undergraduate

  • 航空宇宙工学実験II

    2022   Weekly class   Undergraduate

  • 航空宇宙海洋系特別研究 (航空宇宙工学分野)

    2022   Intensive lecture   Graduate school

  • 航空宇宙工学演習IV

    2021    

  • Advanced Topics in Aerospace Engineering

    2021    

  • 機械工作実習

    2021   Practical Training  

  • 航空宇宙工学実験I

    2021   Practical Training  

  • 航空宇宙工学実験II

    2021   Practical Training  

▼display all

Number of instructed thesis, researches

  • 2023

    Number of instructed the graduation thesis:

    [Number of instructed the Master's Program] (previous term):

  • 2022

    Number of instructed the graduation thesis:

  • 2021

    Number of instructed the graduation thesis:

Social Activities ⇒ Link to the list of Social Activities

  • 共溶媒法を用いた植物油を原料とした持続可能な航空燃料(SAF)

    Type: Other

    一般社団法人日本航空宇宙工業会  2024国際航空宇宙展  2024.10

     More details

    SDGs:

  • 第134回テクノラボツアー「航空宇宙工学分野の研究紹介」

    Role(s): Lecturer

    Type: Seminar, workshop

    大阪公立大学産官学共同研究会、大阪公立大学工学研究科  大阪公立大学 中百舌鳥キャンパス  2022.12

  • 金沢工業大学 航空システム工学科SL講座 宇宙往還用スクラムジェットエンジンの実現に向けて

    Role(s): Lecturer

    Type: Seminar, workshop

    金沢工業大学 航空システム工学科  2021.12

  • 第9回 TT-netワークショップ

    Role(s): Lecturer

    Type: Seminar, workshop

    大阪府立大学  2021.11

Media Coverage

  • 国際航空宇宙展が開幕“空の脱炭素”で新技術「燃料はココナッツ油!? ”脱炭素化"で環境に配慮」 TV or radio program

    テレビ東京  WBS(ワールドビジネスサテライト)  2024.10

      More details

    SDGs:

Visiting Lectures ⇒ Link to the list of Visiting Lectures

  • 極超音速機用エンジンの実現に向けて

    Category:Engineering (machinery, electronics / physics, electrical / electronics, electrical information, chemical biotechnology, architecture, cities (civil engineering / environment), material chemistry, aerospace, marine systems, applied chemistry, chemistry, materials)

     More details

    SDGs:

    Audience:High school students, College students, Graduate students, Teachers, Researchers, General, Scientific organization, Company, Civic organization, Media

  • 持続可能な航空燃料(SAF)の実現に向けて

    Category:Engineering (machinery, electronics / physics, electrical / electronics, electrical information, chemical biotechnology, architecture, cities (civil engineering / environment), material chemistry, aerospace, marine systems, applied chemistry, chemistry, materials)

     More details

    SDGs:

    Audience:High school students, College students, Graduate students, Teachers, Researchers, General, Scientific organization, Company, Civic organization, Governmental agency, Media

Other

  • 研究職歴

    2021.04 - Now

      More details

    大阪府立大学 工学研究科 航空宇宙海洋系専攻 航空宇宙工学分野,助教