Updated on 2024/03/25

写真a

 
Kuroki Tomoyuki
 
Organization
Graduate School of Engineering Division of Mechanical Engineering Associate Professor
School of Engineering Department of Mechanical Engineering
Title
Associate Professor
Affiliation
Institute of Engineering
Contact information
メールアドレス
Affiliation campus
Nakamozu Campus

Position

  • Graduate School of Engineering Division of Mechanical Engineering 

    Associate Professor  2022.04 - Now

  • School of Engineering Department of Mechanical Engineering 

    Associate Professor  2022.04 - Now

Degree

  • Dr.Eng. ( Osaka Prefecture University ) (   Osaka Prefecture University )

Research Areas

  • Environmental Science/Agriculture Science / Environmental load reduction and remediation  / Environmental technology/environmental material

Research subject summary

  • 大気圧プラズマと吸着剤を併用したVOC処理

  • 大気圧プラズマ複合プロセスを用いた表面処理

  • プラズマ・ケミカルハイブリッド法を用いた排ガス処理

Research Career

  • Plasma-Graft Polymerization for Fluororesin

    Plasma-Graft Polymerization, Fluororesin, Surface treatment, Adhesion, Plating 

  • VOCs removal Using Nonthermal Plasma and Adsorbent

    Nonthermal Plasma, Adsorption, Volatile organic compounds (VOCs), Toluene, Xylene 

  • Concentrating Harmful Gas Using Nonthermal Plasma Desorption Process

    Nonthermal plasma, Adsorption, Desorption, NOx, Volatile organic compounds 

  • Simultaneous Removal of NOx, SOx and PM Using Plasma-chemical Hybrid Process

    Plasma-chemical hybrid process, Diesel emission, Simultaneous removal, NOx, Diesel particulate matter 

Professional Memberships

  • The Japan Society of Mechanical Enginners

    1998.03 - Now   Domestic

  • The Institute of Electrostatics Japan

    2000.07 - Now   Domestic

  • The Institute of Electrical Engineeris Japan

    2011.12 - Now   Domestic

  • IEEE

    2001.09 - Now   Overseas

  • Japan Association of Aerosol Science and Technology

    2000.07 - Now   Domestic

  • The Japan Society of Applied Physics

    2016.11 - Now   Domestic

  • Japan Ozone Association

    2019.06 - Now   Domestic

  • The Japan Society of Applied Electromagnetics and Mechanics

    2011.11 - 2016.04   Domestic

  • 水素バリューチェーン推進協議会

    2022.11 - Now   Domestic

▼display all

Awards

  • 日本オゾン協会 論文賞

    2016.05   日本オゾン協会  

     More details

    Country:Japan

  • 静電気学会 進歩賞

    2015.09   静電気学会  

     More details

    Country:Japan

  • Certificate of Merit for Best Young Presenter at Symposium on Environmental Engineering

    2009.07   Environmental Engineering Division, The Institute of Electrostatics Japan  

     More details

    Country:Japan

  • The Institute of Electrostatics Japan Masuda Award

    2006.09   The Institute of Electrostatics Japan  

     More details

    Country:Japan

Papers

  • Dry Emission Control Technology for Glass Melting Furnace by Plasma-Chemical Hybrid Processing Reviewed

    H. Yamasaki, H. Yamamoto, Y. Koizumi, Y. Fukuda, T. Kuroki, M. Okubo

    IEEE Transactions on Industry Applications, IEEE   59 ( 2 )   2421 - 2429   2023.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Higher Adhesion Strength over 10 N/mm between Rubber and Fluoropolymer Film When Treated by Atmospheric Plasma-Graft Polymerization Reviewed

    T. Kuroki, M. Narita, T. Kageyama, H. Yamasaki, T. Matsumoto, T. Ida, M. Okubo

    IEEE Transactions on Industry Applications, IEEE   59 ( 1 )   450 - 455   2023.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Toward Ideal VOCs and Nanoparticle Emission Control Technology Using a Wet-Type Catalysis Nonthermal Plasma Reactor Reviewed International coauthorship

    H. Yamasaki, K. Kishimoto, T. Shimada, T. Kuroki, J. Kang, D. Kim, T. Yagi, M. Okubo

    IEEE Transactions on Industry Applications, IEEE   58 ( 5 )   6591 - 6598   2022.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Performance Improvement in Semi-dry Ozone Injection NOx and SOx Removal Process for a Glass Furnace Flue Gas Reviewed

    Y. Fukuda, T. Kuroki, R. Nishioka, H. Fujishima, H. Yamasaki, H. Yamamoto, M. Okubo

    Ozone: Science & Engineering, Taylor & Francis   44 ( 5 )   453 - 463   2022.09

     More details

    Authorship:Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Effect of Argon and Helium Concentrations on Adsorbed CO2 Dissociation Using Nonthermal Plasma Flow Reviewed

    H. Wakimoto, H. Yamasaki, T. Kuroki, M. Okubo

    Int. J. Plasma Environ. Sci. Technol, 静電気学会   16 ( 1 )   2022.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Simultaneous removal of NOx, SOx, and nanoparticle using a gas-liquid electrical discharge reactor

    X. Xi, H. Yamasaki, S. Nomura, T. Kuroki, M. Okubo, J. Kang, and T. Yagi

    Abstracts for APSPT-12, The 12th Asia-Pacific International Symposium on the Basics and Applications of Plasma Technology   2021.12

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Higher Adhesion Strength over 10 N/mm between Rubber and Fluoropolymer Film Treated by Atmospheric Plasma-Graft Polymerization

    T. Kuroki, M. Narita, T. Kageyama, H. Yamasaki, T. Matsumoto, T. Ida, and M. Okubo

    Conference Record of IEEE IAS Annual Meeting 2021, IEEE   2021.10

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Dry Emission Control Technology for Glass Melting Furnace by Plasma-Chemical Hybrid Processing

    H. Yamasaki, H. Yamamoto, Y. Koizumi , Y. Fukuda, T. Kuroki, and M. Okubo

    Conference Record of IEEE IAS Annual Meeting 2021, IEEE   2021.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Toward Ideal VOCs and Nanoparticle Emission Control Technology Using a Wet-Type Catalysis Nonthermal Plasma Reactor

    H. Yamasaki, K. Kishimoto, T. Shimada, T. Kuroki, J. Kang, D. Kim, T. Yagi, and M. Okubo

    Conference Record of IEEE IAS Annual Meeting 2021, IEEE   2021.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Adhesive Polytetrafluoroethylene Films Fabricated Via Atmospheric Nonthermal Plasma Graft Polymerization Reviewed

    M. Narita, M. Nakamura, T. Kuroki, and M. Okubo

    Journal of the Adhesion Society of Japan, The Adhesion Society of Japan   57 ( 7 )   280 - 290   2021.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale NOx and SOx Aftertreatment by Semi-Dry Plasma-Chemical Hybrid Process in Glass-Melting-Furnace Exhaust Gas Reviewed

    H. Yamasaki, Y. Mizuguchi , R. Nishioka, Y. Fukuda, T. Kuroki, H. Yamamoto, and M. Okubo

    Plasma Chemistry and Plasma Processing, Springer US   42   51 - 71   2021.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Toward NOₓ/SOₓ and Nanoparticle Control Technology Using a Single-Stage Wet-Type Nonthermal Plasma Reactor Reviewed

    H. Yamasaki, S. Nomura, X. Xun, T. Kuroki, J. Kang, T. Yagi, and M. Okubo

    IEEE Transactions on Plasma Science, IEEE   49 ( 6 )   1860 - 1870   2021.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx 再循環法によるディーゼル機関排ガス処理技術 Reviewed

    平野壮太,清水裕也,黒木智之,大久保雅章

    マリンエンジニアリング 雑誌 公益社団法人 日本マリンエンジニアリング学会   56 ( 5 )   824 - 829   2021.05

     More details

    Authorship:Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Performance Evaluation of Semi-dry Flue Gas Desulfurization and Denitration from Flue Gas of a Glass Melt Using Nonthermal Plasma Combined Process Reviewed

    H. Yamasaki, Y. Mizuguchi, K. Maeda, H. Fujishima, T. Kuroki, H. Yamamoto, and M. Okubo

    Mechanical Engineering Journal, 日本機械学会   8 ( 2 )   20 - 00519   2021.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • In-flight Diesel Particulate Matter Removal Using Nonthermal Plasma Filtering Reviewed International coauthorship

    H. Yamasaki, A. Shidara, Y. Shimidzu, T. Kuroki, H-J. Kim, and M. Okubo

    International Journal of Plasma Environmental Science and Technology, J. Inst. Electrostat. Jpn.   14 ( 3 )   2020.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 超音波照射による水中パルス放電の活性化 Reviewed

    山崎晴彦,熊澤裕哉,黒木智之,大久保雅章

    静電気学会誌, 静電気学会   44 ( 6 )   263 - 264   2020.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Effect of Monomer Concentration on Adhesive Strength of PTFE Films Treated with Atmospheric-pressure Nonthermal Plasma Graft Polymerization Reviewed

    T. Kuroki, M. Nakamura, K. Hori, and M. Okubo

    Journal of Electrostatics, Elsevier   108   2020.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Ultrasonically Enhanced Electrohydraulic Discharge for Removal of Organic Compounds Reviewed

    K. Kishimoto, Y. Kumazawa, T. Kuroki, H. Yamasaki, and M. Okubo

    Journal of Electrostatics, Elsevier   108   2020.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Adsorbed CO2 Dissociation Using Argon and Helium Nonthermal Plasma Flows Reviewed

    H. Yamasaki, S. Kamei, T. Kuroki, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   56 ( 6 )   6983 - 6989   2020.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Performance of a Wet-Type Nonthermal Plasma Reactor for NOx, SOx, and Wastewater Treatment Reviewed

    T. Kuroki, S. Nomura, H. Yamasaki, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   56 ( 6 )   6978 - 6982   2020.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Exhaust Gas and Wastewater Treatment Using Wet-type Nonthermal Plasma Reactor

    T. Kuroki, S. Nomura, H. Yamasaki, and M. Okubo

    Proc. of Seventeenth International Conference on Flow Dynamics, Institute of Fluid Science, Tohoku University   2020.10

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Ion Cluster Formation by Nonthermal Plasma Induced by Pulse Corona Discharge Toward Indoor Air Cleaning Reviewed

    M. Okubo, Y. Hiroyasu, and T. Kuroki

    IEEE Transactions on Industry Applications, IEEE   56 ( 5 )   5480 - 5488   2020.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale Combined Reduction of Accumulated Particulate Matter and NOx Using Nonthermal Plasma for Marine Diesel Engine Reviewed

    T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   56 ( 2 )   1804 - 1814   2020.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale NOx and SOx Aftertreatment Using a Two-Phase Ozone and Chemical Injection in Glass-Melting-Furnace Exhaust Gas Reviewed

    H. Yamamoto, T. Kuroki, H. Fujishima, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   55 ( 6 )   6295 - 6302   2019.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale Investigation of Semi-Dry Plasma-Chemical DeNOx Process for Glass Melting Furnace Flue Gas

    T. Kuroki, H. Yamamoto, H. Fujishima, and M. Okubo

    Proceedings of International Conference on Flow Dynamics 2019 (ICFD2019) ICFD2019   2019.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Performance Evaluation of a Wet-type Nonthermal Plasma Reactor for Simultaneous Treatment of NOx, SOx, and Wastewater

    M. Okubo, S. Nomura, H. Yamasaki, and T. Kuroki

    Abstract of EAPETEA-7, 26-28, November 2019, Naha, Japan EAPETEA-7   2019.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • High Reduction Efficiencies of Adsorbed NOx in Pilot-Scale Aftertreatment Using Nonthermal Plasma in Marine Diesel-Engine Exhaust Gas Reviewed

    T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo

    Energies, Multidisciplinary Digital Publishing Institute   12 ( 19 )   2019.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Adsorbed CO2 Dissociation Using Argon and Helium Nonthermal Plasma Flows

    H. Yamasaki, S. Kamei, T. Kuroki, and M. Okubo

    Conference Record of 2019 IEEE Industry Application Society (IAS) Annual Meeting, IAS   2019.09

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Ion Cluster Formation by Nonthermal Plasma Induced by Pulse Corona Discharge Toward Indoor Air Cleaning

    M. Okubo, Y. Hiroyasu, and T. Kuroki,

    Conference Record of 2019 IEEE Industry Application Society (IAS) Annual Meeting, IAS   2019.09

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Performance of a Wet-type Nonthermal Plasma Reactor for NOx, SOx, and Wastewater Treatment

    T. Kuroki, S. Nomura, H. Yamasaki, and M. Okubo

    Conference Record of 2019 IEEE Industry Application Society (IAS) Annual Meeting, IAS   2019.09

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Marine Diesel Particulate Filter Regeneration Using Nonthermal Plasma-Induced Radicals

    T. Kuroki, K. Yoshida, K. Hanamoto, K. Sato, T. Kuwahara, T. Yamamoto and M. Okubo

    Proceedings of The 8th International Workshop of Energy Conversion (IWEC2019) IWEC2019   2019.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Plasma–Chemical Hybrid NOx Removal in Flue Gas from Semiconductor Manufacturing Industries Using a Blade-Dielectric Barrier-Type Plasma Reactor Reviewed

    H. Yamasaki, Y. Koizumi, T. Kuroki, and M. Okubo

    Energies, Multidisciplinary Digital Publishing Institute   12 ( 14 )   2019.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Semi-Dry Plasma-Chemical DeNOx Process for Glass Melting Furnace Flue Gas

    T. Kuroki, H. Yamamoto, H. Fujishima, and M. Okubo

    Proceedings of International Workshop on Environmental Engineering 2019 (IWEE2019)   2019.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Oxidative Decomposition of Adsorbed Toluene Using Ozone Concentrated by Nonthermal Plasma Flow Reviewed

    T. Kuroki, K. Hirai, S. Matsuoka, J. Y. Kim, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   55 ( 3 )   3122 - 3128   2019.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • パルス放電プラズマ-超音波複合処理によるフェノールの分解 Reviewed

    大瀧悠裕,熊澤祐哉,黒木智之,大久保雅章

    静電気学会誌, 静電気学会   43 ( 1 )   19 - 24   2019.02

     More details

    Authorship:Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Improvement in Molecular-Level Adhesive Strength of PTFE Film Treated by Atmospheric Plasma Combined Processing Reviewed

    K. Hori, S. Fujimoto, Y. Togashi, T. Kuroki, and M. Okubo

    IEEE Trans. on. Ind. Applicat., IEEE   55 ( 1 )   825 - 832   2019.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • High-Efficiency Carbon Dioxide Reduction Using Nonthermal Plasma Desorption Reviewed

    M. Okubo, K. Takahashi, S. Kamiya, and T. Kuroki

    IEEE Trans. on. Ind. Applicat., IEEE   54 ( 6 )   6422 - 6429   2018.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale Investigation of a Plasma-Chemical DeNOx Process for Glass Melting Furnace Flue Gas

    T. Kuroki, H. Yamamoto, H. Fujishima, M. Okubo

    Abstract of the 2nd Joint Symposium on Advanced Mechanical Science & Technology   2018.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Nanoparticle and Nitrogen Oxides Control Using a Wet-type Nonthermal Plasma Reactor

    M. Okubo, K. Takehana, and T. Kuroki

    Proc. the 6th Asia Joint Symposium on Plasma and Electrostatics Technologies for Environmental Applications   2018.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Evaluation of Nanoparticle Removal and Exhaust Gas Cleaning Using a Wet-type Nonthermal Plasma Reactor

    T. Kuroki, S. Nishii, and M. Okubo

    Proceedings of The 15th International Conference on Flow Dynamics (ICFD2018), Institute of Fluid Science, Tohoku University   2018.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Effect of Monomer Concentration on Adhesive Strength of PTFE Film in Atmospheric Plasma Graft-Polymerization Process

    T. Kuroki, M. Nakamura, K. Hori, and M. Okubo

    Proceedings of the 2018 Electrostatics Joint Conference   2018.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Pilot-Scale Combined Reduction of Accumulated Particulate Matter and NOx Using Nonthermal Plasma for Marine Diesel Engine

    T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo

    Proceedings of the 2018 Electrostatics Joint Conference   2018.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Pilot-Scale NOx and SOx Aftertreatment Using a Two-Phase Ozone and Chemical Injection in Glass-Melting-Furnace Exhaust Gas

    H. Yamamoto, T. Kuroki, H. Fujishima, and M. Okubo

    Proceedings of the 2018 Electrostatics Joint Conference   2018.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Evaluation on Nitrogen Oxides and Nanoparticle Removal and Nitrogen Monoxide Generation Using a Wet-Type Nonthermal Plasma Reactor Reviewed

    K. Takehana, T. Kuroki, and M. Okubo

    Journal of Physics D: Applied Physics, IOP Publishing   51 ( 20 )   2018.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Removal of High Concentrations of the Anesthetic Gas Nitrous Oxide Using Nonthermal Plasma Combined With an Adsorbent Reviewed

    T. Kuroki, T. Yamamoto, S. Nishii, M. Akita, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   53 ( 6 )   5852 - 5858   2017.11

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Simultaneous Reduction of Diesel Particulate and NOx Using a Catalysis-Combined Nonthermal Plasma Reactor Reviewed

    M. Okubo, H. Yamada, K. Yoshida, and T. Kurok

    IEEE Transactions on Industry Applications, IEEE   53 ( 6 )   5875 - 5882   2017.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • High Efficient Adsorbed CO2 Dissociation Using Nonthermal Plasma Flow

    M. Okubo, S. Kamiya, S. Kamei, and T. Kuroki

    Fourteenth International Conference on Fluid Dynamics (ICFD2017), ICFD   2017.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • High Efficient Adsorbed CO2 Dissociation Using Nonthermal Plasma Flow

    M. Okubo, S. Kamiya, S. Kamei, and T. Kuroki

    Proceedings of IWEC2017, the 7th International Workshop of Energy Conversion, Energy Conversion Center of Doshisha University   2017.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • High Efficient Carbon Dioxides Reduction Using Nonthermal Plasma Desorption

    M. Okubo, S. Kamiya, K. Takahashi, and T. Kuroki

    Conference Record of IEEE Industry Application Society 53rd Annual Meeting, IEEE-IAS   USB memory   2017.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Oxidative Decomposition of Adsorbed Toluene Using Ozone Concentration by Nonthermal Plasma Flow

    T. Kuroki, K. Hirai, S. Matsuoka, J. Y. Kim, and M. Okubo

    Conference Record of IEEE Industry Application Society 53rd Annual Meeting, IEEE-IAS   USB memory   2017.10

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Improvement in Molecular-level Adhesive Strength of PTFE Film Treated by Atmospheric Plasma Combined Processing

    K. Hori, S. Fujimoto, Y. Togashi, T. Kuroki, and M. Okubo

    Conference Record of IEEE Industry Application Society 53rd Annual Meeting, IEEE-IAS   USB memory   2017.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Nanoparticle Removal and Exhaust Gas Cleaning Using Gas-liquid Interfacial Nonthermal Plasma Reviewed

    T. Kuroki, S. Nishii, T. Kuwahara, and M. Okubo

    Journal of Electrostatics, Elsevier   87   86 - 92   2017.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • CO2 Concentration Using Adsorption and Nonthermal Plasma Desorption Reviewed

    M. Okubo, T. Kuroki, H. Yamada, K. Yoshida, and T. Kuwahara

    IEEE Transactions on Industry Applications, IEEE   53 ( 3 )   2432 - 2439   2017.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Decomposition of Toluene Adsorbed on Hydrophobic Zeolite by Nonthermal Plasma Flow with Water Spray Reviewed

    T. Kuroki, M. Tanaka, and M. Okubo

    International Journal of Plasma Environmental Science & Technology, 静電気学会他   11 ( 1 )   92 - 97   2017.04

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • High Efficient CO2 Dissociation Technology Using Adsorption-Plasma Combined Treatment

    M. Okubo, S. Kamiya, S. Kamei, K. Nakajima, and T. Kuroki

    Abstract CD of 9th Kyoto International Forum for Environment and Energy (9th KIFEE) KIFEE   2017.03

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Molecular-Level Reinforced Adhesion Between Rubber and PTFE Film Treated by Atmospheric Plasma Polymerization Reviewed

    M. Okubo, T. Onji, T. Kuroki, H. Nakano, E. Yao, and M. Tahara

    Plasma Chemistry and Plasma Processing, Springer   36 ( 6 )   1431 - 1448   2016.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Recent Investigation of a Plasma-Chemical DeNOx Process for Glass Melting Furnace Flue Gas

    T. Kuroki, H. Fujishima, H. Yamamoto, and M. Okubo

    Proceedings of Thirteenth International Conference on Flow Dynamics (ICFD2016) ICFD   582 - 583   2016.10

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • NOx and SOx Simultaneous Removal from Exhaust Gas in a Glass Melting Furnace Using a Combined Ozone Injection and Chemical Hybrid Process

    H. Fujishima, H. Yamamoto, T. Kuroki, and M. Okubo

    Record of XIV International Conference of Electrostatic Precipitation ICESP 2016 ICESP   2016.09

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Nanoparticle Removal and Exhaust Gas Cleaning Using a Gas-Liquid Interfacial Nonthermal Plasma

    T. Kuroki

    Proceedings of the 2016 Electrostatics Joint Conference   2016.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)  

  • Simultaneous Reduction of Diesel Particulate and NOx Using Catalysis Combined Nonthermal Plasma Reactor

    M. Okubo, H. Yamada, K. Yoshida, and T. Kuroki

    Proceedings of the 2016 Electrostatics Joint Conference   2016.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Simultaneous removal of NOx and SOx from flue gas of a glass melting furnace using a combined ozone injection and semi-dry chemical process Reviewed

    Y. Yamamoto, H. Yamamoto, D. Takada, T. Kuroki, H Fujishima, and M. Okubo

    Ozone: Science & Engineering, Taylor & Francis   38 ( 3 )   211 - 218   2016.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Continuous Reduction of Cyclic Adsorbed and Desorbed NOx in Diesel Emission Using Nonthermal Plasma Reviewed

    T. Kuwahara, H. Nakaguchi, T. Kuroki, and M Okubo

    Journal of Hazardous Materials, Elsevier   308 ( 5 )   216 - 224   2016.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • CO2 concentration using adsorption followed by nonthermal plasma desorption

    M. Okubo, T. Kuroki, H. Yamada, K. Yoshida, and T. Kuwahara

    Proceedings of IWEC2016 the 6th International Workshop of Energy Conversion, Energy Conversion Center of Doshisha University   73 - 79   2016.03

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Fundamental Study on the Simultaneous Removal of Nanoparticles and Harmful Gas Components Using a Wet- type Discharge Plasma Reactor Reviewed

    Tomoyuki Kuroki, Shunsuke Nishii, Masaaki Okubo

    Earozoru Kenkyu   30 ( 2 )   108 - 113   2015.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx and SOx Removal System for Exhaust Gas from Glass Melting Furnace Using Plasma-Chemical Hybrid Process

    Y. Yamamoto, T. Kuroki, H. Yamamoto, H. Fujishima, and M. Okubo

    Abstract of 9th Asian Aerosol Conference, Asian Aerosol Research Assemble   2015.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Nonthermal plasma hybrid process for preparation of organic electroluminescence fluoropolymer film devices Reviewed

    T. Kuroki, K. Nakayama, D. Nakamura, T. Onji, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   51 ( 3 )   2497 - 2503   2015.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Effect of water spray on adsorbed toluene decomposition by nonthermal plasma flow

    T. Kuroki, M. Tanaka, and M. Okubo

    Conference Record of 2014 IEEE Industry Applications Society Annual Meeting, IEEE   2014.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Complete regeneration of diesel particulate filter using nonthermal plasma-induced ozone injection

    T. Kuwahara, S. Nishii, T. Kuroki, and M. Okubo

    14th International Symposium on High Pressure Low Temperature Plasma Chemistry (HAKONE XIV) 雑誌   2014.09

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Pilot-scale investigation of low emission boiler system combined with a plasma-chemical hybrid process

    T. Kuroki, H. Fujishima, A. Tanaka, K. Otsuka, and M. Okubo

    14th International Symposium on High Pressure Low Temperature Plasma Chemistry (HAKONE XIV) 雑誌   2014.09

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Total Emission Control for Multi-Fuel Boiler System with Plasma-Chemical Aftertreatment

    H. Fujishima, Y. Fukumoto, T. Kuroki, A. Tanaka, K. Otsuka and M. Okubo

    Abstract for 7th KIFEE International Symposium on Environment Energy and Materials, KIFEE   2014.03

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • ガラス溶解炉向けオゾン注入・ケミカル複合脱硝処理システム ―半乾式モデル装置による試験― Reviewed

    黒木智之,山本柱,藤島英勝,髙田大地,山戸雄介,大久保雅章

    静電気学会誌, 静電気学会   38 ( 1 )   52 - 58   2014.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Microfabrication and Metal Plating Technologies on Polytetrafluoroethylene Film Surface Treated by Atmospheric-Pressure Nonthermal-Plasma Graft Polymerization Process Reviewed

    T. Kuroki, M. Tahara, T. Kuwahara, and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   50 ( 1 )   45 - 50   2014.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale Aftertreatment Using Nonthermal Plasma Reduction of Adsorbed NOx in Marine Diesel-Engine Exhaust Gas Reviewed

    T. Kuwahara, K. Yoshida, T. Kuroki, K. Hanamoto, K. Sato, and M. Okubo

    Plasma Chemistry and Plasma Processing, Springer   34 ( 1 )   65 - 81   2014.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Complete Regeneration Characteristics of Diesel Particulate Filter Using Ozone Injection Reviewed

    T. Kuwahara, S. Nishii, T. Kuroki, and M. Okubo

    Applied Energy, Elsevier   111   652 - 656   2013.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Super Clean Diesel Engine Power Generation Using Plasma Hybrid Aftertreatment Invited

    M. Okubo, M. Kawai, T. Kuroki, T. Kuwahara, K. Yoshida, K. Hanamoto and K. Sato

    Proceedings of International Workshop on Energy Conversion 2013, IWEC2013   2013.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Total Marine Diesel Emission Control Technology Using Nonthermal Plasma Hybrid Process

    M. Okubo, T. Kuwahara, K. Yoshida, M. Kawai, K. Hanamoto, K. Sato, and T. Kuroki

    Proceedings of 27th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion, Power Generation and Rail Traction, CIMAC   ( 153 )   2013.05

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • 間接プラズマを用いたディーゼル微粒子低温除去に及ぼす排ガス温度の影響 Reviewed

    桑原拓也,西本昌文,吉田恵一郎,黒木智之,大久保雅章

    日本機械学会論文集(B編), 日本機械学会   79 ( 800 )   723 - 727   2013.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Application of Photo-Etching of Polytetrafluoroethylene Induced by High Energy Synchrotron Radiation to LIGA Reviewed

    H. Kido, T. Kuroki, M. Okubo and Y. Utsumi

    Microsystem Technologies, Springer   19 ( 9 )   301 - 307   2013.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Influence of Injection of Concentrated NOx into Diesel Engine Intake on Exhaust Gas Components and Fuel Consumption Reviewed

    K. Yoshida, T. Kuwahara, T. Kuroki and M. Okubo

    Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshu) , 電気学会   182 ( 3 )   39 - 47   2013.02

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Bromomethane Decomposition Using a Pulsed Dielectric Barrier Discharge Reviewed

    T. Kuroki, T. Oishi, T. Yamamoto and M. Okubo

    IEEE Transactions on Industry Applications, IEEE   49 ( 1 )   293 - 297   2013.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Single-Stage Simultaneous Removal of Gases and Particulates in Wet-Type Plasma-Chemical Reactor

    T. Kuwahara, T. Kuroki, T. Yamamoto and M. Okubo

    Proceedings of International Symposium on Electrohydrodynamics 2012, ISEHD   108 - 113   2012.09

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Higher-Efficiency CO2 Dissociation Using Nonthermal Plasma Desorption

    M. Okubo, H. Yamada, T. Kuwahara and T. Kuroki

    Proc. the 39th IEEE International Conference on Plasma Science, IEEE   4E-7   2012.07

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Low Emission Multi-Fuel Boiler Plant Combined with Plasma-Chemical Hybrid NOx Removal System

    T. Kuroki, H. Fujishima, Y. Yamato, T. Kuwahara and M. Okubo

    Proceedings of The International Conference on Electrical Engineering 2012, ICEE   USB memory   2012.07

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Surface Modification by Nonthermal Plasma Induced by Using Magnetic-Field-Assisted Gliding Arc Discharge Reviewed

    Z. Feng, N. Saeki, T. Kuroki, M. Tahara and M. Okubo

    Applied Physics Letters, AIP   101 ( 4 )   2012.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Continuous Regeneration of Marine Diesel Particulate Filter Using Nonthermal Plasma-Induced Radicals

    M. Okubo, T. Kuwahara, T. Kuroki, K. Yoshida, K. Hanamoto, K. Sato and T. Yamamoto

    Proceedings of 8th International Symposium on Non-Thermal/Thermal Plasma Pollution Control Technology & Sustainable Energy, Supélec   USB memory   2012.06

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Continuous Regeneration Characteristics of Ceramic Particulate Filter in Marine Diesel Engine Using Nonthermal Plasma-Induced Ozone Injection Reviewed

    T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, T. Yamamoto and M. Okubo

    47 ( 3 )   379 - 384   2012.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Nonthermal Plasma Regeneration of Marine Diesel Particulate Filter

    T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, T. Yamamoto, M. Okubo

    Proceedings of IWEC2011, the 4th International Workshop of Energy Conversion   115 - 121   2011.11

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Improvement of NOX Reduction Efficiency in Diesel Emission Control Using Nonthermal Plasma Combined Exhaust Gas Recirculation Process Reviewed

    T. Kuwahara, K. Yoshida, Y. Kannaka, T. Kuroki, M. Okubo

    IEEE Transactions on Industry Applications, IEEE   47 ( 6 )   2359 - 2366   2011.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Magnetic-Field-Assisted Gliding Arc Discharge Plasma for Surface Modification Reviewed

    Z. Feng, N. Saeki, T. Kuroki, M. Tahara, M. Okubo

    IEEE Transactions on Plasma Science, IEEE   39 ( 11 )   2846 - 2847   2011.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • ディーゼルエンジン吸気へのNOx濃縮注入の排ガス組成及び燃費への影響 Reviewed

    吉田恵一郎, 桑原拓也, 黒木智之, 大久保雅章

    電気学会論文誌C, 電気学会   131 ( 11 )   1933 - 1939   2011.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Continuous Regeneration Characteristics of Ceramic Particulate Filter in Marine Diesel Engine Using Nonthermal Plasma-Induced Ozone Injection

    T. Kuwahara, K. Yoshida, K. Hanamoto, K. Sato, T. Kuroki, T. Yamamoto, M. Okubo

    Proceedings of the International Symposium on Marine Engineering (ISME), 日本マリンエンジニアリング学会   Paper - ISME143   2011.10

     More details

    Publishing type:Research paper (international conference proceedings)   Kind of work:Joint Work  

  • Simultaneous Removal of Odor and Particulate Using Plasma-Treated Polymer Filters Reviewed

    M. Okubo, T. Kuroki, N. Saeki

    Thin Solid Films, Elsevier   519 ( 20 )   6994 - 6998   2011.08

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Oxidation System of Adsorbed VOCs on Adsorbent Using Nonthermal Plasma Flow Reviewed

    T. Kuroki, K. Hirai, S. Matsuoka, J. Y. Kim, M. Okubo

    IEEE Transactions on Industry Applications, IEEE   47 ( 4 )   1916 - 1921   2011.07

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Odor Removal Characteristics of a Laminated Film-Electrode Packed-Bed Nonthermal Plasma Reactor Reviewed

    T. Kuwahara, M. Okubo, T. Kuroki, H. Kametaka, T. Yamamoto

    Sensors, Multidisciplinary Digital Publishing Institute   11 ( 6 )   5529 - 5542   2011.06

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 大気圧プラズマグラフト重合処理による航空宇宙機用繊維強化複合材料の強度向上 Reviewed

    青井達治, 黒木智之, 田原充, 大久保雅章

    電気学会論文誌A, 電気学会   131 ( 5 )   412 - 413   2011.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Single-Stage Simultaneous Reduction of Diesel Particulate and NOx Using Oxygen-Lean Nonthermal Plasma Application Reviewed

    M. Okubo, T. Kuroki, K. Yoshida, T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   46 ( 6 )   2143 - 2150   2010.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Design Factors for NOx Reduction in Nitrogen Plasma Reviewed

    A. Mihalcioiu, K. Yoshida, M. Okubo, T. Kuroki, T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   46 ( 6 )   2151 - 2156   2010.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Decomposition of Adsorbed Xylene on Adsorbent Using Nonthermal Plasma with Gas Circulation Reviewed

    T. Kuroki, K. Hirai, R. Kawabata, M. Okubo, T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   46 ( 2 )   672 - 679   2010.03

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-Scale NOx and SOx Removal From Boiler Emission Using Indirect-Plasma and Chemical Hybrid Process Reviewed

    T. Yamamoto, H. Fujishima, M. Okubo, T. Kuroki

    IEEE Transactions on Industry Applications, IEEE   46 ( 1 )   29 - 37   2010.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Charge-to-mass Ratio and Dendrite Structure of Diesel Particulate Matter Charged by Corona Discharge Reviewed

    T. Kuroki, M. Ishidate, M. Okubo, T. Yamamot

    Carbon, Elsevier   48 ( 1 )   184 - 190   2010.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Diesel Emission Control System Using Combined Process of Nonthermal Plasma and Exhaust Gas Components’ Recirculation Reviewed

    K. Yoshida, T. Kuroki, M. Okubo

    Thin Solid Films, Elsevier   518 ( 3 )   987 - 992   2009.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Pilot-scale experiment for simultaneous dioxin and NOx removal from garbage incinerator emissions using the pulse corona induced plasma chemical process Reviewed

    K. Yoshida, T. Yamamoto, T. Kuroki, M. Okubo

    Plasma Chemistry and Plasma Processing, Springer   29 ( 5 )   373 - 386   2009.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Continuous Regeneration of Ceramic Particulate Filter in Stationary Diesel Engine by Nonthermal-Plasma-Induced Ozone Injection Reviewed

    M. Okubo, T. Kuroki, S. Kawasaki, K. Yoshida, T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   45 ( 5 )   1568 - 1574   2009.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx Reduction in Diesel Engine Emission Using Adsorption Followed by Nonthermal Plasma Process : Performances of Three Types of Plasma Reactors Reviewed

    K. Yoshida, M. Okubo, T. Kuroki, T. Yamamoto

    International Journal of Emerging Multidisciplinary Fluid Sciences, Multi-science   1 ( 3 )   201 - 211   2009.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Plasma-Adsorption-Catalysis for the Toluene Destruction Process Reviewed

    G. Prieto, O. Prieto, C.R. Gay, K. Yoshida, T. Kuroki, M. Okubo, T. Yamamoto

    International Journal of Plasma Environmental Science & Technology, 静電気学会他   3 ( 2 )   107 - 115   2009.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Regeneration of honeycomb zeolite by nonthermal plasma desorption of toluene Reviewed

    T. Kuroki, T. Fujioka, R. Kawabata, M. Okubo, and T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   45 ( 1 )   10 - 15   2009.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx aftertreatment using thermal desorption and nitrogen nonthermal plasma reduction Reviewed

    K. Yoshida, M. Okubo, T. Kuroki, and T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   44 ( 5 )   1403 - 1409   2008.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • PM and NOx removal for diesel engine emission using ozonizer and chemical hybrid reactor Reviewed

    T. Yamamoto, A. Kajimoto, M. Okubo, T. Kuroki, and K. Yoshida

    IEEE Transactions on Industry Applications, IEEE   44 ( 5 )   1431 - 1435   2008.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Plating technology for fluorocarbon polymer films using atmospheric-pressure nonthermal plasma graft polymerization Reviewed

    M. Okubo, M. Tahara, T. Kuroki, T. Hibino, and N. Saeki

    Journal of Photopolymer Science and Technology, The Technical Association of Photopolymers, Japan   21 ( 2 )   219 - 224   2008.08

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Continuous operation of commercial-scale plasma-chemical aftertreatment system of smoke tube boiler emission with oxidation reduction potential and pH control Reviewed

    T. Kuroki, H. Fujishima, K. Otsuka, T. Ito, M. Okubo, T. Yamamoto, and K. Yoshida

    Thin Solid Films, Elsevier   516 ( 19 )   6704 - 6709   2008.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Total diesel emission control technology Using ozone injection and plasma desorption Reviewed

    M. Okubo, N. Arita, T. Kuroki, K. Yoshida, and T. Yamamoto

    Plasma Chemistry and Plasma Processing, Springer Netherlands   28 ( 2 )   173 - 187   2008.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • プラズマ・ケミカル複合プロセスによるごみ焼却炉排気浄化のパイロットプラント試験(NOx及びダイオキシンの同時処理) Reviewed

    山本俊昭,大久保雅章,黒木智之,吉田恵一郎

    日本機械学会論文集B編, 日本機械学会   73 ( 732 )   1767 - 1778   2007.08

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Numerical Investigation for CF4 Decomposition Using RF Low Pressure Plasma Reviewed

    T. Kuroki, S. Tanaka, M. Okubo and T. Yamamoto

    IEEE Transactions on Industry Applications, IEEE   43 ( 4 )   1075 - 1083   2007.07

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Water vapor desorption and adsorbent regeneration for air conditioning unit using pulsed corona plasma Reviewed

    T. Yamamoto, G. Tanioka, M. Okubo, T. Kuroki

    Journal of Electrostatics, Elsevier   65 ( 4 )   221 - 227   2007.04

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Toluene Concentration Using Honeycomb Nonthermal Plasma Desorption Reviewed

    T. Kuroki, T. Fujioka, M. Okubo, T. Yamamoto

    Thin Solid Films, Elsevier   515 ( 9 )   4272 - 4277   2007.03

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Carbon particulate matter incineration in diesel engine emissions using indirect nonthermal plasma processing Reviewed

    M. Okubo, N. Arita, T. Kuroki, T. Yamamoto

    Thin Solid Films, Elsevier   515 ( 9 )   4289 - 4295   2007.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Diesel Engine Emission Control Using Pulsed Corona Plasma-Wet Chemical Hybrid Process Reviewed

    M. Okubo, T. Kuroki, K. Kitaura, T. Yamamoto

    Journal of Environment and Engineering, JSME Electric Journal   1 ( 1 )   29 - 38   2006.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Decomposition of Trace Phenol in Solution Using Gas-Liquid Interface Discharge Reviewed

    T. Kuroki, K. Yoshida, H. Watanabe, M. Okubo, T. Yamamoto

    Jpn J. Applied Physics, Part 1, 応用物理学会   45 ( 5A )   4296 - 4300   2006.05

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 電解気泡浮上法を用いた切削油剤再生技術-アルミニウム微粒子,スラッジの同時除去- Reviewed

    黒木智之,渡邊博俊,大久保雅章,山本俊昭

    電気学会論文誌D, 電気学会   126 ( 3 )   330 - 336   2006.03

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 間接プラズマ・化学複合プロセスを用いたNOx処理技術(空気活性ガス注入方式と直接酸化方式の比較) Reviewed

    藤島英勝,春名俊治,黒木智之,大久保雅章,山本俊昭

    日本機械学会論文集B編, 日本機械学会   71 ( 711 )   2816 - 2822   2005.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • CF4 Decomposition Using Low-Pressure Pulse-Modulated Radio Frequency Plasma Reviewed

    T. Kuroki, S. Tanaka, M. Okubo, T. Yamamoto

    JSME Int. J. Seri. B, 日本機械学会   48 ( 3 )   440 - 447   2005.08

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 呼吸による人体ウイルス感染のシミュレーション Reviewed

    山本俊昭,梁昌浩,小田原聡,安田龍介,大久保雅章,黒木智之

    日本機械学会論文集B編, 日本機械学会   71 ( 708 )   1965 - 1970   2005.08

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx Reduction Aftertreatment System Using Nitrogen Nonthermal Plasma Desorption Reviewed

    M. Okubo, M. Inoue, T. Kuroki, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   41 ( 4 )   891 - 899   2005.07

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • CF4 Decomposition Using Inductively Coupled Plasma: Effect of Power Frequency Reviewed

    T. Kuroki, J. Mine, M. Okubo, T. Yamamoto, N. Saeki

    IEEE Trans. on. Ind. Applicat., IEEE   41 ( 1 )   215 - 220   2005.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • CF4 Decomposition of Flue Gas from Semiconductor Process Using Inductively Coupled Plasma Reviewed

    T. Kuroki, J. Mine, S. Odahara, M. Okubo, T. Yamamoto, N. Saeki

    IEEE Trans. on. Ind. Applicat., IEEE   41 ( 1 )   221 - 228   2005.01

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Regeneration of Diesel Particulate Filter Using Nonthermal Plasma Without Catalyst Reviewed

    M. Okubo, T. Miyashita, T. Kuroki, S. Miwa, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   40 ( 6 )   1451 - 1458   2004.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Low-Temperature Soot Incineration of Diesel Particulate Filter Using Remote Nonthermal Plasma Induced by a Pulsed Barrier Discharge Reviewed

    M. Okubo, T. Kuroki, Y. Miyairi, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   40 ( 6 )   1504 - 1512   2004.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Aluminum surface treatment using three different plasma-assisted dry chemical processes Reviewed

    T. Yamamoto, A. Yoshizaki, T. Kuroki, M. Okubo

    IEEE Trans. on. Ind. Applicat., IEEE   40 ( 5 )   1220 - 1225   2004.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 低気圧誘導結合型プラズマによる半導体製造装置排ガスCF4の分解(運転条件の最適化と反応生成物の分析) Reviewed

    黒木智之, 佐伯登, 大久保雅章, 山本俊昭

    日本機械学会論文集B編, 日本機械学会   70 ( 692 )   1058 - 1063   2004.04

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • プラズマ・化学複合プロセスを用いたディーゼル微粒子,NOx,SOxの湿式同時処理技術 Reviewed

    藤島英勝, 黒木智之, 大久保雅章, 山本俊昭

    日本機械学会論文集B編, 日本機械学会   70 ( 691 )   817 - 822   2004.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Electrochemical Methods for Coolant Oil Regeneration Reviewed

    T. Yamamoto, C-L. Yang, T. Nagaoka, M. Okubo, T. Kuroki, M. Okamoto

    Filtration, The Filtration Society   4 ( 2 )   109 - 113   2004.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 非平衡プラズマプロセスによる乾式アルミ表面処理 Reviewed

    山本俊昭, 吉崎淳人, 黒木智之, 大久保雅章

    静電気学会誌, 静電気学会   28 ( 1 )   53 - 58   2004.02

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • ハニカム内に発生させた非熱プラズマによるディーゼル微粒子フィルタの低温燃焼再生 Reviewed

    大久保雅章, 三輪真一, 黒木智之, 山本俊昭

    日本機械学会論文集B編, 日本機械学会   69 ( 688 )   2719 - 2724   2003.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Performance Evaluation of Nonthermal Plasma Reactors for NO Oxidation in Diesel Engine Exhaust Gas Treatment Reviewed

    T. Yamamoto, M. Okubo, B.S. Rajanikanth, T. Kuroki, M. Nishino

    IEEE Trans. on. Ind. Applicat. , IEEE   39 ( 6 )   1608 - 1613   2003.11

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • プラズマ・化学反応複合プロセスを用いた無触媒脱硝・脱硫同時処理技術 Reviewed

    山本俊昭, 黒木智之, 大久保雅章, 早川邦洋

    日本機械学会論文集B編, 日本機械学会   69 ( 685 )   2167 - 2172   2003.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Soot Incineration of Diesel Particulate Filter Using Honeycomb Nonthermal Plasma Reviewed

    M. Okubo, T. Kuroki, S. Miwa, T. Yamamoto

    SAE paper, JSAE, 2003-01-1886, JSAE 20030309   2003.05

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Nonthermal Plasma Regeneration of Diesel Particulate Filter Reviewed

    T. Yamamoto, M. Okubo, T. Kuroki, Y. Miyairi

    SAE paper, SAE, 2003-01-1182   2003.03

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 非平衡プラズマによるNOx除去に及ぼす磁場の効果 Reviewed

    大久保雅章, 秦 誠彦, 黒木智之, 山本俊昭

    静電気学会誌, 静電気学会   26 ( 5 )   215 - 219   2002.10

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Single-Stage Plasma-chemical Process for Particulates, NOx, and SOx Simultaneous Removal Reviewed

    T. Kuroki, M. Takahashi, M. Okubo, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   38 ( 5 )   1204 - 1209   2002.09

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • NOx Concentration Using Adsorption and Nonthermal Plasma Desorption Reviewed

    M. Okubo, G. Tanioka, T. Kuroki, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   38 ( 5 )   1196 - 1203   2002.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • プラズマグラフト重合処理された脱臭・水分呼吸特性を有する繊維布の機能性計測 Reviewed

    大久保雅章, 山本俊昭, 黒木智之, 嶺 潤子, 佐伯 登, 片岡清一

    静電気学会誌 雑誌 静電気学会   25 ( 6 )   328 - 329   2001.12

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Odor Control Using the AC Barrier-Type Plasma Reactors Reviewed

    M. Okubo, T. Kuroki, H. Kametaka, T. Yamamoto

    IEEE Trans. on. Ind. Applicat., IEEE   37 ( 5 )   1447 - 1455   2001.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Electronic Air Cleaner Composed of Nonthermal Plasma Reactor and Electrostatic Precipitator Reviewed

    M. Okubo, T. Yamamoto, T. Kuroki, H. Fukumoto

    IEEE Trans. on. Ind. Applicat., IEEE   37 ( 5 )   1505 - 1511   2001.09

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 非平衡プラズマを用いた室内環境清浄技術(たばこ煙中の悪臭ガス除去) Reviewed

    黒木智之, 大久保雅章, 山本俊昭

    日本機械学会論文集B編, 日本機械学会   67 ( 658 )   1481 - 1486   2001.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • 脱臭・集じんの同時処理が可能な空気清浄機の開発 Reviewed

    黒木智之, 大久保雅章, 福元英樹, 山本俊昭

    エアロゾル研究, 日本エアロゾル学会   15 ( 2 )   116 - 123   2000.06

     More details

    Authorship:Lead author, Corresponding author   Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

  • Nonthermal Plasma Desorption for NOx Control Reviewed

    T. Yamamoto, M. Okubo, T. Kuroki

    Trans. of the Institute of Fluid-Flow Machinery, IFFM Publishers (Wydawnictwo IMP)   ( 107 )   111 - 120   2000.01

     More details

    Publishing type:Research paper (scientific journal)   Kind of work:Joint Work  

▼display all

Books and Other Publications

  • 【水】と機能性ポリマーに関する材料設計,最新応用

    大久保雅章, 黒木智之 他64名(分担執筆)( Role: Joint author)

    (株)技術情報協会  2021.07  ( ISBN:978-4-86104-853-1

  • Advanced Mechanical Science and Technology for the Industrial Revolution 4.0, Development of Ultra-Low Emission Multi-Fuel Boiler System Using Plasma–Chemical Hybrid Clean Technology

    T. Kuroki, H. Fujishima, A. Tanaka, K. Otsuka, and M. Okubo(分担執筆)( Role: Joint author)

    Springer  2018.01  ( ISBN:978-981-10-4109-9

     More details

    Responsible for pages:181-186  

  • プラズマ産業応用技術(表面処理から環境,医療,バイオ,農業用途まで)

    大久保雅章,山本柱,黒木智之他(分担執筆)( Role: Joint author)

    (株)シーエムシー出版  2017.07 

     More details

    Responsible for pages:235-243  

  • ガス状の試料を分析(13章3-7節),表面の状態を解析する(14章5節)

    大久保雅章,黒木智之他(共著)( Role: Joint author)

    (株)技術情報協会  2013.09 

  • 大気圧プラズマの生成制御と応用技術 改訂版

    青井達治,黒木智之,大久保雅章 他38名(分担執筆),小駒 益弘監修( Role: Joint author)

    サイエンス&テクノロジー株式会社  2012.03  ( ISBN:978-4-86428-039-6

     More details

    Responsible for pages:169-182  

  • においの分析・評価と最新脱臭/消臭技術実務集

    大久保雅章, 黒木智之 他28名(分担執筆)( Role: Joint author)

    ㈱技術情報協会  2008.07 

     More details

    Responsible for pages:327-332  

▼display all

Industrial Property Rights

  • 排気ガスの処理方法および処理装置(特願2009-117734,登録日20131227)

    黒木智之,藤島英勝,大久保雅章,大塚馨一

     More details

    property_type:Patent 

    Patent/Registration no:5441029 

  • 活性ガス生成方法,生成装置及び排ガス処理システム装置(特願2005-217285,登録日20120323)

    大久保雅章,藤島英勝,黒木智之,山本俊昭,大塚馨一,大石強

     More details

    property_type:Patent 

    Patent/Registration no:4951791 

  • 表面処理された金属材およびその製造方法と製造装置(特願2003-173519,登録日20081114)

    黒木智之,山本俊昭,大久保雅章

     More details

    property_type:Patent 

    Patent/Registration no:4215200 

Outline of collaborative research (seeds)

  • 大気圧プラズマと吸着剤を併用したVOC処理

     More details

    VOCを吸着剤でいったん吸着し、一定時間経過後に脱着させプラズマ処理を行うことで高効率処理を実現する。

  • 大気圧プラズマを用いたアルミ表面処理

     More details

    乾式処理であるプラズマを用いてアルミ表面の脱脂および表面改質を行い、耐食剤との密着性を向上させ、有害な六価クロムを用いたクロメート湿式処理と同等以上の耐食性を持たせる。

  • プラズマ・ケミカルハイブリッド法を用いた排ガス処理

     More details

    排ガス中に含まれるNOx、SOx、微粒子をプラズマ・ケミカルハイブリッド法を用いて同時除去を行う

Grant-in-Aid for Scientific Research

  • プラズマ複合プロセスを用いた低濃度CO2還元技術の開発

    Grant-in-Aid for Scientific Research(C)  2026

  • Simultaneous treatment technology for high-concentration NOx, SOx, and particulates from ships using plasma hybrid cleaning method

    Grant-in-Aid for Scientific Research(B)  2025

  • プラズマ複合プロセスを用いた低濃度CO2還元技術の開発

    Grant-in-Aid for Scientific Research(C)  2025

  • 大気圧低温プラズマ複合処理による低濃度N2O除害技術の開発

    Grant-in-Aid for Scientific Research(C)  2025

  • Simultaneous treatment technology for high-concentration NOx, SOx, and particulates from ships using plasma hybrid cleaning method

    Grant-in-Aid for Scientific Research(B)  2024

  • プラズマ複合プロセスを用いた低濃度CO2還元技術の開発

    Grant-in-Aid for Scientific Research(C)  2024

  • 大気圧低温プラズマ複合処理による低濃度N2O除害技術の開発

    Grant-in-Aid for Scientific Research(C)  2024

▼display all

Charge of on-campus class subject

  • 機械マテリアル演習

    2024   Weekly class   Undergraduate

  • 機械システム演習

    2024   Weekly class   Undergraduate

  • エネルギー機械演習

    2024   Weekly class   Undergraduate

  • 機械基礎実験

    2024   Weekly class   Undergraduate

  • 機械設計演習

    2024   Weekly class   Undergraduate

  • 機械工学概論

    2024   Weekly class   Undergraduate

  • 環境保全工学特論1

    2024   Weekly class   Graduate school

  • 工学研究の最先端

    2024   Intensive lecture   Graduate school

  • 機械工学概論

    2024   Weekly class   Undergraduate

  • 機械工学概論

    2023   Weekly class   Undergraduate

  • 環境保全工学特論1

    2023   Weekly class   Graduate school

  • 機械工学総合演習I

    2023   Weekly class   Undergraduate

  • 機械工学実験I

    2023   Weekly class   Undergraduate

  • 機械工学概論

    2023   Weekly class   Undergraduate

  • 初年次ゼミナール

    2023   Weekly class   Undergraduate

  • 機械工学総合演習II

    2023   Weekly class   Undergraduate

  • 機械工学実験II

    2023   Weekly class   Undergraduate

  • 機械設計製図演習II

    2023   Weekly class   Undergraduate

  • 機械製図演習

    2023   Weekly class   Undergraduate

  • 機械工学総合演習I

    2022   Weekly class   Undergraduate

  • 初年次ゼミナール

    2022   Weekly class   Undergraduate

  • 環境保全工学特論1

    2022   Weekly class   Graduate school

  • 機械系特別研究第1

    2022   Intensive lecture   Graduate school

  • 機械系特別演習第1 (中百舌鳥)

    2022   Intensive lecture   Graduate school

  • 機械工学実験I

    2022   Weekly class   Undergraduate

  • 機械工学概論

    2022   Weekly class   Undergraduate

  • 機械系特別演習第2 (中百舌鳥)

    2022   Intensive lecture   Graduate school

  • 機械工学総合演習II

    2022   Weekly class   Undergraduate

  • 機械工学実験II

    2022   Weekly class   Undergraduate

  • 機械設計製図演習II

    2022   Weekly class   Undergraduate

  • 機械系特別研究第2

    2022   Intensive lecture   Graduate school

  • Introduction to Programming

    2021    

  • Introduction to Programming

    2021    

  • Mechanical Engineering Design and Practice II

    2021    

  • Introduction to Mechanical, Aerospace and Marine-System EngineeringI

    2021    

  • Laboratory in Mechanical Engineering II

    2021   Practical Training  

  • Laboratory in Mechanical Engineering I

    2021   Practical Training  

  • Exercises in Mechanical Engineering II

    2021    

  • Exercises in Mechanical Engineering I

    2021    

  • Advanced Topics in Environmental Protection Engieering I

    2021    

  • Introduction to Mechanical Engineering

    2021    

▼display all

Social Activities ⇒ Link to the list of Social Activities

  • 2020年度「オンライン府大講座」 大気圧非熱プラズマを利用した環境浄化技術

    2020.04 - 2021.03