現代システム科学域 知識情報システム学類

2024/07/11 更新
大学院情報学研究科 学際情報学専攻
准教授 2022年04月 - 継続中
現代システム科学域 知識情報システム学類
准教授 2022年04月 - 継続中
博士(工学) ( 大阪府立大学 )
ナノテク・材料 / 構造材料、機能材料 / 材料情報科学
ナノテク・材料 / 材料加工、組織制御
ナノテク・材料 / 金属材料物性
情報通信 / 知能情報学
情報通信 / 知覚情報処理
情報通信 / 統計科学
材料情報学
計算材料科学
マテリアルズ・インフォマティクスによる合金設計の効率化
機械学習による材料製造プロセスの最適化
深層学習による材料計測に対する自動化
第一原理計算による構造材料のマテリアルデザイン
材料情報科学
2019年04月 - 継続中
人工知能学会
2021年04月 - 継続中
鋳造工学会
2020年04月 - 継続中 国内
情報処理学会
2018年 - 継続中 国内
日本鉄鋼協会
2016年 - 継続中 国内
日本MRS
2012年 - 継続中 国内
日本材料学会
2005年 - 継続中 国内
日本金属学会
2005年 - 継続中 国内
軽金属学会
2005年 - 継続中 国内
関西支部幹事 情報処理学会
2024年05月 - 2026年05月
会誌・欧文誌編集委員 日本金属学会
2022年04月 - 2026年04月
編集委員 軽金属学会
2021年07月 - 2025年07月
会誌・欧文誌査読委員 日本金属学会
2020年04月 - 2022年04月
関西支部マテリアルデザイン研究会幹事 日本鉄鋼協会・日本金属学会
2018年04月 - 2020年03月
大会運営委員 軽金属学会
2015年07月 - 2017年07月
会報編集委員 日本金属学会
2013年03月 - 2015年04月
分子動力学部門委員会幹事 日本材料学会
2007年04月 - 2016年03月
令和2年度軽金属論文賞
2020年11月 軽金属学会
MRS-J貢献賞
2019年11月 第29回日本MRS年次大会
軽金属奨励賞
上杉徳照
2013年11月 一般社団法人軽金属学会 第一原理計算による電子・原子レベルから見た軽金属材料の材料特性に関する研究
大阪府立大学 工学研究科 博士課程 卒業・修了
2002年04月 - 2005年01月
大阪府立大学 工学研究科 修士課程 卒業・修了
2000年04月 - 2002年03月
大阪府立大学 工学部 学士課程 卒業・修了
- 2000年03月
深層学習による材料分野の画像解析の発展
上杉 徳照
まてりあ 63 ( 6 ) 371 - 380 2024年06月( ISSN:13402625 ) ( eISSN:18845843 )
Uesugi T.
ISIJ International 64 ( 7 ) 1206 - 1217 2024年05月( ISSN:09151559 ) ( eISSN:13475460 )
深層学習による回帰と不良品分類を両立するダクタイル鋳鉄管の鋳肌検査 査読
上杉 徳照, 大倉 直也, 中島 智晴, 小川 耕平, 堤 親平, 澤田 健二, 中本 光二
材料 73 ( 2 ) 157 - 164 2024年02月( ISSN:05145163 ) ( eISSN:18807488 )
上杉 徳照, 近藤 充晟, 濱田 真行, 喜多 俊輔, 平田 智丈
材料 72 ( 5 ) 376 - 383 2023年05月( ISSN:05145163 ) ( eISSN:18807488 )
Sublattice alloy design of high-strength steels: Application of clustering and nanoscale precipitation of interstitial and substitutional solutes 査読
T. Furuhara, Y. Zhang, M. Sato, G. Miyamoto, M. Enoki, H. Ohtani, T. Uesugi and H. Numakura
Scripta Materialia 223 115063 2023年01月
New dislocation dissociation accompanied by anti-phase shuffling in the α″ martensite phase of a Ti alloy 査読
M. Tahara, N. Otaki, D. Minami, T. Uesugi, Y. Takigawa, K. Higashi, T. Inamura and H. Hosoda
Acta Materialia 227 117705 2022年04月
分位損失を用いた機械学習による黒鉛球状化処理におけるMg歩留まりの予測 査読
福島瑞貴, 上杉徳照, 辻川正人, 堤親平, 小川耕平, 澤田健二, 中本光二
鋳造工学 94 ( 2 ) 2022年02月
Solute cluster-induced precipitation and resultant surface hardening during nitriding of Fe–Al–V alloys 査読
G. Miyamoto, Y. Tateyama, T. Uesugi, Y. Hayasaka and T. Furuhara
Scripta Materialia 203 2021年10月
港湾鋼構造物の腐食を防止するAl-Mg-Ca溶射皮膜の開発 査読
上杉 徳照, 東 健司
防錆管理 65 ( 3 ) 91 - 97 2021年03月
Prediction System for Solid Solubility Limits of Ag-, Cu-, Al-, and Mg-Based Alloys Using Artificial Neural Networks and First-Principles Calculations 査読
T. Mochizuki, T. Uesugi and Y. Takigawa
Materials Transactions 61 2083 - 2090 2020年11月
Al–7.3 mass%Mg合金の粒界破壊に及ぼす微量Fe添加の影響 査読
大手里奈, 山田貴洋, 上杉徳照, 瀧川順庸, 東健司
軽金属 69 457 - 464 2019年04月
Al-Cu-Mg合金とAl-Zn-Mg-Cu合金の粒界破壊に及ぼすZr添加の影響 査読
大手里奈, 吉岡浩司, 上杉徳照, 瀧川順庸, 東健司
軽金属 69 235 - 241 2019年04月
Suppression of the thermal embrittlement induced by sulfur segregation to grain boundary in Ni-based electrodeposits 査読
I. Matsui, Y. Hisai, T.Uesugi, N. Omura, Y. Takigawa, K. Higashi
Materialia 6 2019年04月
Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys 査読
I. Matsui, A. Watanabe, T. Uesugi, N. Omura, Y. Takigawa, T. Yamamoto
Materialia 雑誌 8 2019年04月
Artificial neural network assisted by first-principles calculations for predicting transformation temperatures in shape memory alloys 査読
D. Minami, T. Uesugi, Y. Takigawa, K. Higashi
International Journal of Modern Physics B 雑誌 33 2019年
高延性を有する電析バルクナノ結晶Ni-W合金におけるW含有量の増加 査読
児玉勇人, 森宏樹, 松井功, 瀧川順庸, 上杉徳照, 東健司
表面技術 雑誌 70 50 - 52 2019年
Development of Electrodeposition Process Based on Chloride Electrolytes for Bulk Pure Fe with Plastic Deformability 査読
Y. Ogura, M. Kanetake, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Transactions 雑誌 60 130 - 135 2019年
Ductile electrodeposited Al from a dimethylsulfone bath with trace amounts of tin chloride 査読
C. Kuma, K. Sato, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Letters 雑誌 244 192 - 194 2019年
Revealing the intrinsic ductility of electrodeposited nanocrystalline metals 査読
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Letters 雑誌 235 224 - 227 2019年
Al-8Mg alloy with high strength and high ductility by addition of a grain boundary strengthening element 査読
M. Ninomiya, R. Ohte, T. Uesugi, Y. Takigawa, K. Higashi
Materials Letter 雑誌 245 218 - 221 2019年
Reduction of impurity contents in aluminum plates electrodeposited from a dimethylsulfone-aluminum chloride bath 査読
C. Kuma, K. Sato, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Journal of Alloys and Compounds 雑誌 783 919 - 926 2019年
Fabrication of Electrodeposited Permalloys with High Strength and High Ductility 査読
M. Kanetake, Y. Takigawa, T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 59 598 - 601 2018年03月
Fabrication of Defect-Free Fe-Mn Alloys by Using Electrodeposition 査読
Y. Ogura, H. Mori, Y. Takigawa, T. Uesugi, K. Higashi
Materials Transactions 雑誌 59 935 - 938 2018年
FeCrSi繊維強化Al合金基複合材料の高温変形構成式の構築 査読
府山伸行, 青木良晃, 上杉徳照, 瀧川順庸, 東健司
材料 雑誌 67 1000 - 1005 2018年
First-principles study of transformation strains and phase stabilities in α″ and β Ti-Nb-X alloys 査読
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Journal of Alloys and Compounds 雑誌 Elsevier 716 37 - 45 2017年09月
複合サイクル腐食試験によるAl-5Mg-0.15Ca溶射皮膜の評価 査読
足立振一郎, 上杉徳照, 井上博之, 東健司
溶射 雑誌 日本溶射協会 54 55 - 57 2017年06月
Improvement of High Temperature Strength by Addition of Vanadium Content of Ni–Cr–Mo Steel for Brake Discs 査読
N. Harada, T. Uesugi, Y. Takigawa and K. Higashi
ISIJ International 雑誌 日本鉄鋼協会 57 550 - 557 2017年03月
Al-5Mg合金溶射皮膜における添加元素が引張密着強度に及ぼす影響 査読
足立振一郎, 井上博之, 上杉徳照, 東健司, 植野修一
溶射 雑誌 日本溶射学会 53 103 - 105 2016年09月
Effect of Transition Metals on Enthalpy Change in Alpha and Beta Ti Alloys from First-Principles Calculations 査読
T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9) 雑誌 PRICM9 91 - 92 2016年08月
Effect of Period 4 Elements on Work Function in Aluminum from First-Principles Calculations 査読
T. Higuchi, T. Uesugi, H. Inoue, Y. Takigawa and K. Higashi
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9) 雑誌 PRICM9 621 - 623 2016年08月
Effects of Third Elements on Shape Memory Properties of Ti-Nb-X Ternary Alloys from First-Principles Calculations 査読
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9) 雑誌 PRICM9 878 - 881 2016年08月
Grain Boundary Energy of Σ13 [0001] Twist Grain Boundary in MgB2 from First-Principles Calculations 査読
Y. Hisai, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9) 雑誌 PRICM9 914 - 916 2016年08月
Reduction in sulfur content of electrodeposited bulk nanocrystalline Fe–Ni alloys using manganese chloride 査読
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 175 86 - 88 2016年07月
Mg-6%Al-1%Zn-2%Ca合金のMIG溶接 査読
瀧川順庸, 味原颯大, 松下遼, 上田光二, 木ノ本裕, 上杉徳照, 東健司
軽金属 雑誌 軽金属学会 66 252 - 257 2016年06月
Alloying Effects of Transition Metals on Beta Phase Stability of Ti Alloys from First-Principles Calculations 査読
T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi
Proceedings of the 13th World Conference on Titanium 雑誌 TMS 1919 - 1923 2016年05月
Effects of Solute Fe, Zn, and Mg on Recrystallization in Aluminum 査読
K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 57 329 - 334 2016年03月
Effect of Alloying Element X on Transformation Strains and Phase Stabilities between αʹʹ and β Ti-Nb-X (X = Al, Sn, Zr, Ta) Ternary Alloys from First-Principles Calculations 査読
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 57 263 - 268 2016年03月
Reduction in sulfur content of electrodeposited bulk nanocrystalline Fe–Ni alloys using manganese chloride 査読
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 175 86 - 88 2016年02月
Calculation of alloying effect on formation enthalpy of TiCu intermetallics from first-principles calculations for designing Ti–Cu-system metallic glasses 査読
N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
Philosophical Magazine Letters 雑誌 Taylor & Francis Ltd. 96 27 - 34 2016年02月
Effect of Solute Elements on Grain Refinement during Friction Stir Processing in High-Purity Aluminum 査読
T. Uesugi, H. Iwami, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 838-839 116 - 121 2016年01月
Texture Change during Superplastic Deformation in Fine-Grained Magnesium Alloys 査読
H. Watanabe, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 838-839 59 - 65 2016年01月
Improvement in plastic elongation at room temperature of electrodeposited bulk nanocrystalline Fe–Ni alloys by reducing sulfur content 査読
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 757 - 762 2015年12月
Design of high-strength aluminum alloys based on first-principles calculations of misfit strain and grain boundary cohesion 査読
T. Uesugi and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 552 - 563 2015年12月
Effect of transition elements on specific electrical resistance in Aluminum from first-principles calculations 査読
T. Higuchi, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 561 - 567 2015年12月
Effects of transition metals on elastic moduli of binary β-Ti alloys from first-principles calculations 査読
A. Koyano, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 568 - 576 2015年12月
Effects of third elements on shape memory properties of Ti-Nb-X and Ti-Mo-X ternary alloys from first-principles calculations 査読
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 577 - 581 2015年12月
Study of solute atoms and precipitates affecting recrystallization temperature in high purity Al-Fe alloy 査読
K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 686 - 692 2015年12月
Reduction of embrittlement elements in electrodeposited Al by alloying 査読
C. Kuma, Y. Hanaoka, Y. Takigawa, T. Uesugi and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 745 - 748 2015年12月
Fabrication of new Ti-Zr-Cu-Ga bulk metallic glasses 査読
Y. Ohashi, N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 749 - 752 2015年12月
Elevating W content of high ductility electrodeposited bulk nanocrystalline Ni–W alloys 査読
H. Kodama, H. Mori, Y. Takigawa, T. Uesugi and K. Higashi
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV 雑誌 PFAM 753 - 756 2015年12月
Mechanical Behavior of Electrodeposited Bulk Nanocrystalline Fe-Ni Alloys 査読
I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Materials Research 雑誌 ELSEVIER 18 95 - 100 2015年11月
Significance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22%Al alloy 査読
T. Uesugi, M. Kawasaki, M. Ninomiya, Y. Kamiya, Y. Takigawa and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 645 47 - 56 2015年10月
第5章 マグネシウム合金の耐食・耐摩耗性の向上と成形技術 第4節 マグネシウム合金の組織制御と高延性化技術 査読
東健司, 瀧川順庸, 上杉徳照
自動車軽量化のための材料開発と強度、剛性、強靭性の向上技術 雑誌 技術情報協会 445 - 450 2015年06月
Achieving room-temperature superplasticity in an ultrafine-grained Zn-22% Al alloy 査読
T. Uesugi, Y. Takigawa, M. Kawasaki and K. Higashi
Letters on materials 雑誌 ELSEVIER 5 269 - 275 2015年05月
The evaluation parameters for glass-forming ability in Ti–Cu system metallic glasses 査読
N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 139 73 - 76 2015年
Strategy for Electrodeposition of Highly Ductile Bulk Nanocrystalline Metals with a Face-Centered Cubic Structure 査読
I. Matsui, Y. Takigawa, D. Yokoe, T. Kato, T. Uesugi, and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 55 1859 - 1866 2014年12月
Prediction and fabrication of Ti-Zr-Co ternary metallic glasses based on effective atomic radius in Ti solid solution from first-principles calculations 査読
N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
Journal of Non-Crystalline Solids 雑誌 ELSEVIER 400 67 - 71 2014年09月
Enhancement in mechanical properties of bulk nanocrystalline Fe-Ni alloys electrodeposited using propionic acid 査読
I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 607 505 - 510 2014年06月
Influence of impurities on mechanical properties of electrodeposited bulk nanocrystalline Al 査読
S. Ono, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 574 - 579 2014年05月
Relationship between strength and grain size of friction stir processed and annealed high purity aluminum 査読
S. Kobayashi, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 372 - 375 2014年05月
Preparatory electrodeposition process for high purity bulk aluminum 査読
Y. Hanaoka, S. Ono, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 237 - 241 2014年05月
Influence of filler rod composition on the strength of tungsten inert gas welded magnesium alloy joint 査読
S. Shimomura, T. Minomo, Y. Takigawa, T. Uesugi, M. Ueda, Y. Kinomoto and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 663 - 666 2014年05月
Effect of small addition of Si on superplastic elongation at room temperature in Zn--Al eutectoid superplastic alloy 査読
Y. Kamiya, M. Ninomiya, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 328 - 331 2014年05月
Design and fabrication of new Ti--based ternary metallic glasses based on effective atomic radius in the Ti solid solution calculated by ab--initio calculation 査読
N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 671 - 675 2014年05月
Dislocation creep in Al-22.2, 53.6 and 101 at.ppm Fe solid solution alloys 査読
K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 922 749 - 754 2014年05月
Contribution of interstitial solute strengthening in aluminum 査読
I. Matsui, S. Ono, Y. Hanaoka, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine Letters 雑誌 Taylor & Francis Ltd. 94 63 - 71 2014年02月
Fabrication of bulk nanocrystalline Fe–Ni alloys with high strength and high ductility by an electrodeposition 査読
I. Matsui, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 116 71 - 74 2014年02月
Development of highly efficient saving processes of rare earth in R-T-B permanent magnet. 査読
A. Saguchi, T. Uesugi, Y. Takigawa, and K.Higashi
Physics Procedia 雑誌 ELSEVIER 54 168 - 173 2014年
Development of new high-strength and heat-resistant Mg-Zn-Y-X (X = Zr and Ag) casting alloys 査読
Y. Ienaga, K. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 783-786 384 - 389 2014年
Pre-electrodeposition process for improving tensile ductility of Al electrodeposited from a dimethylsulfone bath 査読
I. Matsui, Y. Hanaoka, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 109 229 - 232 2013年10月
Accommodation mechanisms for grain boundary sliding as inferred from texture evolution during superplastic deformation 査読
H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine 雑誌 Taylor & Francis Ltd. 93 2913 - 2931 2013年08月
Effect of orientation on tensile ductility of electrodeposited bulk nanocrystalline Ni-W alloys 査読
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 578 318 - 322 2013年08月
First-Principles Calculation of Grain Boundary Excess Volume and Free Volume in Nanocrystalline and Ultrafine-Grained Aluminum 査読
T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 54 1597 - 1604 2013年08月
Effect of interstitial carbon on the mechanical properties of electrodeposited bulk nanocrystalline Ni 査読
I. Matsui, T. Uesugi, Y. Takigawa and K. Higashi
Acta Materialia 雑誌 ELSEVIER 61 3360 - 3369 2013年05月
Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn-Ag-Cu Solder Joints during Thermal Cycling 査読
N. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 54 796 - 805 2013年05月
Effect of additives on tensile properties of bulk nanocrystalline Ni-W alloys electrodeposited from a sulfamate bath 査読
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters 雑誌 ELSEVIER 99 65 - 67 2013年05月
長周期積層構造型耐熱Mg-Zn-Y-Ag鋳造合金の組織形態と機械的性質 査読
家永裕一, 井上剣志, 上杉徳照, 東健司
日本金属学会誌 雑誌 日本金属学会 77 159 - 164 2013年04月
Casting Process and Mechanical Properties of Large-Scale Extruded Mg-Zn-Y Alloys
Y. Ienaga, K. Inoue, T. Uesugi and K. Higashi
SAE Technical Paper 雑誌 SAE International 01 2013年04月
Enthalpies of Solution in Ti-X (X = Mo, Nb, V and W) Alloys from First-Principles Calculations 査読
T. Uesugi, S. Miyamae and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 54 484 - 492 2013年03月
First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys 査読
T. Uesugi and K. Higashi
雑誌 67 1 - 10 2013年02月
Isotropic superplastic flow in textured magnesium alloy 査読
H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 558 656 - 662 2012年12月
粒界過剰体積の第一原理計算と超微細粒・ナノ結晶アルミニウムの自由体積 査読
上杉徳照, 東健司
軽金属 雑誌 軽金属学会 62 464 - 471 2012年11月
第一原理計算によるチタン合金の合金設計
上杉徳照, 宮前将, 東健司
溶融塩および高温化学 雑誌 溶融塩委員会 55 108 - 114 2012年11月
Optimization of the Mg-Al-Zn-Ca-Sr alloy composition based on the parameter A′ in the constitutive equation for the climb-controlled dislocation creep including the stacking fault energy 査読
K. Hirai, I. Takeuchi, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 551 19 - 24 2012年08月
Segregation of Alkali and Alkaline Earth Metals at Σ11(113)[110] Grain Boundary in Aluminum from First-Principles Calculations 査読
T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 53 1699 - 1705 2012年08月
Fabrication of bulk nanocrystalline Al electrodeposited from a dimethylsulfone bath
I. Matsui, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A 雑誌 ELSEVIER 550 2012年07月
Improvement in tensile ductility of electrodeposited bulk nanocrystalline Ni.W by sulfamate bath using propionic acid 査読
I.Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Microelectronic Engineering 雑誌 Elsevier 91 98 - 101 2012年03月
Effects of Zn addition and aging treatment on tensile properties of Sn-Ag-Cu alloys 査読
N. Hamada, T. Uesugi, Y. Takigawa, K. Higashi
Journal of Alloys and Compounds 雑誌 Elsevier 527 226 - 232 2012年03月
Threshold stress for superplasticity in solid solution magnesium alloys. 査読
H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine 雑誌 Taylor & Francis Ltd. 92 ( 7 ) 787 - 803 2012年03月
各種光沢剤を添加したスルファミン酸浴から作製したバルクナノ結晶Niの引張特性 査読
松井功, 岩見英明, 瀧川順庸, 上杉徳照, 東健司
表面技術 雑誌 一般社団法人 表延技術協会 62 ( 12 ) 686 - 690 2011年12月
Grain Boundary Relaxation in Fine-grained Magnesium Solid Solutions. 査読
H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine 雑誌 Taylor & Francis 91 ( 32 ) 4158 - 4171 2011年10月
高温リング圧縮試験によるアルミニウム合金の動的摩擦係数の調査. 査読
江立夫, 西岡典昭, 王建義, 細川裕之, 上杉徳照, 瀧川順庸, 東健司
材料 雑誌 日本材料学会 60 ( 9 ) 838 - 843 2011年09月
Enhanced tensile ductility in bulk nanocrystalline nickel electrodeposited by sulfamate bath. 査読
I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi
Materials Letters 雑誌 Elsvier Science Publisher B. V. 65 ( 15-16 ) 2351 - 2353 2011年08月
Dynamic Friction Properties and Microstructural Evolution in AZ31 Magnesium Alloy at Elevated Temperature during Ring Compression Test 査読
N. Nishioka, L. F. Chiang, T. Uesugi, Y. Takigawa, and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 52 ( 8 ) 1575 - 1580 2011年08月
Influence of Bath Composition on Tensile Ductility in Electrodeposited Bulk Nanocrystalline Nickel. 査読
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 52 ( 2 ) 142 - 146 2011年02月
Effect of Mg Content on the Minimum Grain Size of Al-Mg Alloys Obtained by Friction Stir Processing. 査読
T. Morishige, T. Hirata, T. Uesugi, Y. Takigawa, M. Tsujikawa, and K. Higashi
Scripta Materialia 雑誌 ELSEVIER 64 ( 4 ) 355 - 358 2011年02月
Application of Electroforming Process to Bulk Amorphous Ni-W Alloy. 査読
Y. Takigawa, S. Wakayama, I. Matsui, T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 52 ( 1 ) 37 - 40 2011年01月
First-principles calculation of grain boundary energy and grain boundary excess free volume in aluminum: role of grain boundary elastic energy 査読
T. Uesugi and K. Higashi
Journal of Materials Science 雑誌 Springer Netherlands 46 ( 12 ) 4199 - 4205 2011年01月
Effect of Small Addition of Zinc on Creep Behavior of Tin 査読
Naoyuki Hamada, Masakazu Hamada, Tokuteru Uesugi,Yorinobu Takigawa and Kenji Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 51 ( 10 ) 1747 - 1752 2010年09月
Tensile Properties of Bulk Nanocrystalline Ni and Ni-W Fabricated by Sulfamate Bath 査読
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum 雑誌 Trans tech publications 654 ( 656 ) 1114 - 1117 2010年06月
Solute Segregation at Σ11(113)[110] Grain Boundary and Effect of the Segregation on Grain Boundary Cohesion in Aluminum from First Principles 査読
T. Uesugi and K. Higashi
Materials Science Forum 雑誌 Trans tech publications 654 ( 656 ) 942 - 945 2010年06月
Investigation on Dynamic Friction Properties of Extruded AZ31 Magnesium Alloy Using by Ring Upsetting Method 査読
Li-Fu Chiang; H. Hosokawa, Jian-Yih Wang, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans tech publications 51 ( 7 ) 1249 - 1254 2010年05月
Effect of Tool Materials on Dynamic Friction Characteristics and Microstructural Evolution at Elevated Temperature in Extruded AZ31 Magnesium Alloy 査読
L.F. Chiang, N. Nishioka, J.Y. Wang, H. Hosokawa, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 51 ( 3 ) 477 - 481 2010年03月
Effect of Tool Materials on Dynamic Friction Characteristics and Microstructural Evolution at Elevated Temperature inExtruded AZ31 Magnesium Alloy 査読
L.F. Chiang, N. Nishioka, J.Y. Wang, H. Hosokawa, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 51 ( 3 ) 477 - 481 2010年02月
第一原理計算概論と化合物・希薄合金への摘要 査読
上杉徳照,東健司
金属 雑誌 株式会社アグネ技術センター 80 ( 1 ) 4 - 10 2010年01月
Application of Misfit Strain Calculated from First principles in Solid Solution Strengthening of Al-based Alloys 査読
T. Uesugi and K. Higashi
PFAM18 雑誌 日本学術振興会 183 - 192 2009年12月
Influence of bath Composition on Characteristics in an Electrodeposited Bulk Nanocrystalline Ni 査読
I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi
PFAM18 雑誌 日本学術振興会 933 - 936 2009年12月
Glass Transition and Crystallization Behavior of Zr-Based Metallic Glass under Rapid Heating 査読
Y. Sakamoto, Y. Saotome, K. Amiya, Y. Takigawa, T. Uesugi, and K. Higashi
PFAM18 雑誌 日本学術振興会 1813 - 1818 2009年12月
Plastic Deformation Behavior of Zr-based Bulk Metallic Glass with Different Pre-introduced Shear Bands Direction 査読
T. Kimura, J. Kobata, Y. Takigawa, T. Uesugi, H. Kimura and K. Higashi
PFAM18 雑誌 日本学術振興会 1805 - 1812 2009年12月
Mechanical Properties in Aluminum Lanthanum Alloys Produced by Electron-Beam Deposition 査読
W. Kinoshita, Y. Takigawa, T. Uesugi and K. Higashi
PFAM18 雑誌 日本学術振興会 251 - 256 2009年12月
First-principles Studies on Magnesium Σ10 Grain Boundary: Effects of Al and Y Solute Atoms 査読
R. Nishihara, T. Uesugi, Y. Takigawa, and K. Higashi
PFAM18 雑誌 日本学術振興会 2067 - 2074 2009年12月
Effects of Heavy Metal Additions on Deformation Characteristics at Elevated Temperatures in Magnesium 査読
K. Sumimoto, T. Uesugi, Y. Takigawa and K. Higashi
PFAM18 雑誌 日本学術振興会 483 - 486 2009年12月
Friction Coefficient and its Effect on Texture of Extruded AZ31 Magnesium Alloy in Ring Compression Test 査読
N. Nishioka, L. F. Chiang, T. Uesugi, Y. Takigawa, and K. Higashi
PFAM18 雑誌 日本学術振興会 467 - 472 2009年12月
Threshold Stress for Superplastic Flow in Fine-Grained Dilute Magnesium Alloys 査読
A. Owashi, H. Watanabe, T. Uesugi, Y. Takigawa and K. Higashi
PFAM18 雑誌 日本学術振興会 461 - 466 2009年12月
Effect of Insoluble Dopant on Tetragonal to Monoclinic Phase Transformation in Tetragonal Zirconia Polycrystal 査読
Y. Takigawa, T. Yamamoto and K. Higashi
PFAM18 雑誌 日本学術振興会 1195 - 1204 2009年12月
Fracture Mechanisms in Ultrafine-grained of Zn-22Al Alloy Exhibiting Room-temperature High-strain-rate Superplasticity 査読
A. Kushibe, T. Tanaka, Y. Takigawa, and K. Higashi
PFAM18 雑誌 日本学術振興会 25 - 34 2009年12月
Creep Resistant Mg-Al-Zn-Ca-Sr alloy 査読
K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi
Magnesium Technology 2009 雑誌 TMS 143 - 144 2009年02月
超急冷凝固されたFe-13.5Cr-1.3Mo-0.4C系ステンレス鋼における高硬度化プロセスの最適化 査読
今井順二、 濱田糾、 上杉徳照、 瀧川順庸、 東健司
材料 雑誌 日本材料学会 57 704 - 711 2008年04月
Deformation Behavior of Zr-based Bulk Metallic Glass Matrix Composites in Compression 査読
J. Kobata, Y. Takigawa, T. Mukai, T. Uesugi, H. Tsuda, H. Kimura and K. Higashi
Progress of Composites 2008 in Asia and Australasia (Proceedings of ACCM-6) 雑誌 213 - 214 2008年04月
Toward understanding in atomistic scale of grain boundary plasticity 査読
T. Uesugi and K. Higashi
Proceedings of the 3rd JSME/ASME ICM&P 2008 雑誌 2008年04月
Effect of Initial Grain Size on Dynamically Recrystallized Grain Size in AZ31 Magnesium Alloy 査読
Y. Takigawa, M. Honda, T. Uesugi and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 49 1979 - 1982 2008年04月
リング圧縮試験を用いたAZ31マグネシウム押出材の温間域における動的摩擦係数の調査 査読
江立夫、 細川裕之、 王建義、 上杉徳照、 瀧川順庸、 東健司
塑性と加工 雑誌 日本塑性加工学会 49 901 - 905 2008年04月
Softening by Coarsening of Ni-Al B2 Phase Particles in Fe-Cr-Ni-Al-Zr Alloy 査読
J. Imai, T. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 49 ( 3 ) 489 - 493 2008年03月
Fe-13.5Cr-1.3Mo-0.4C系ステンレス鋼におけるEqual-cannel angular extrusionを用いた高硬度化プロセスについて 査読
今井順二、 濱田糾、 上杉徳照、 瀧川順庸、 東健司
材料 雑誌 日本材料学会 57 ( 2 ) 105 - 111 2008年02月
First-principles calculations of grain boundary γ-surface for various grain boundaries with different energies in aluminum 査読
T. Uesugi, Y. Inoue, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 551-552 331 - 336 2007年04月
Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water 査読
T. Shibano, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 781 - 784 2007年04月
Fabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys be an Electroforming Process 査読
A. Fujii, Y. Kimoto, S. Wakayama, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 691 - 694 2007年04月
Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass 査読
J. Kobata, Y. Takigawa, S.W. Chung, H. Tsuda, T. Uesugi, H. Kimura and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 1345 - 1348 2007年04月
Mechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room Temperature 査読
S. Uchida, I. Takeuchi, G. Gonda, K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 145 - 148 2007年04月
Effect of Ca and Sr content on room and high temperature mechanical properties of a cast AZ91 Magnesium Alloy 査読
I. Takeuchi, K. Hirai, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 141 - 144 2007年04月
First-Principles Studies on Grain Boundary Energy of [110] Tilt Grain Boundaries in Aluminum 査読
Y. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 1837 - 1840 2007年04月
Effect of Small Amount of Dopant on Phase Stability of Zirconia Bioceramics 査読
Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 1561 - 1564 2007年04月
Effect of Co-doping on Phase Stability of Zirconia Bioceramics in Hot Water 査読
S. Yuhara, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 773 - 776 2007年04月
Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process 査読
S. Wakayama, Y. Kimono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 1375 - 1378 2007年04月
Stacking Fault Energy of Cu-Ga Alloys from First Principles 査読
S. Fujita, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 1915 - 1918 2007年04月
Dynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y Alloy 査読
T. Noro, T. Uesugi, Y. Takigawa, M. Tsujikawa, H. Mabuchi and K.Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 433 - 436 2007年04月
Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys 査読
M. Honda, T. Uesugi, Y. Takigawa, H. Mabuchi and K. Higashi
Advanced Materials Research 雑誌 Trans Tech Publications Ltd. 26-28 449 - 452 2007年04月
Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles 査読
T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 561-565 977 - 980 2007年04月
Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations 査読
T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 503-504 209 - 214 2006年04月
Effect of manganese addition on strength and fracture toughness in Mg-6Al-1Zn alloy 査読
T. Sasaki, T. Uesugi, Y. Takigawa and K. Higashi
Key Engineering Materials 雑誌 Trans Tech Publications Ltd. 306-308 857 - 862 2006年04月
Elastic constants of AlLi from first principles 査読
T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 46 ( 6 ) 1117 - 1121 2005年06月
Materials Design for High-Strength Mg-Based Alloys by Understanding from Ab Initio Calculation 査読
T. Uesugi and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 488-489 131 - 134 2005年04月
Grain Boundary Sliding of Σ5(001) Twist Grain Boundary in Aluminium Bicrystal from First-Principles Calculations 査読
T. Uesugi, Kengo Tsuchiya, M. Kohyama and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 447-448 27 - 32 2004年04月
Ab initio study on divacancy binding energies in aluminum and magnesium 査読
T. Uesugi, M. Kohyama and K. Higashi
Physical Review B 雑誌 American Physical Society 68 ( 18 ) 2003年11月
Molecular Dynamics Simulation of Triazine Dithiol / MgO Interface 査読
N. Hamada, T. Uesugi, Hideya Torii and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 419-422 ( Ⅱ ) 943 - 948 2003年04月
Atomic Size Effects on Al, Ca and Sc in Mg Solid Solutions from First-Principles Calculations 査読
T. Uesugi, M. Kohyama, K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 426-432 ( 1 ) 599 - 603 2003年04月
Generalized Stacking Fault Energy and Dislocation Properties for Various Slip Systems in Magnesium: a First-Principles Study 査読
T. Uesugi, M. Kohyama, Masahide Kohzu and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 419-422 ( Ⅰ ) 225 - 230 2003年04月
Ab Initio Calculation on the Structure and Elastic Properties of a Magnesium-Lithium Alloy 査読
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
Materials Transactions 雑誌 The Japan Institute of Metals 42 ( 7 ) 1167 - 1171 2001年07月
Ab Initio Study on the Structure of Mg-Li Alloys 査読
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
Materials Science Forum 雑誌 Trans Tech Publications Ltd. 350-351 49 - 54 2000年04月
チタンの基礎と応用
上杉徳照, 佐原亮二( 担当: 分担執筆 , 範囲: 第3章 合金設計法と計算科学)
内田老鶴圃 2023年03月
自動車軽量化のための材料開発と強度、剛性、強靭性の向上技術
東健司, 瀧川順庸, 上杉徳照( 担当: 分担執筆 , 範囲: 第5章 第4節 マグネシウム合金の組織制御と高延性化技術)
技術情報協会 2015年06月
上杉 徳照
山陽特殊製鋼技報 30 ( 1 ) 3 - 20 2023年06月( ISSN:1340-6825 )
小川耕平, 堤親平, 中本光二, 上杉徳照
鋳造工学 第181回全国講演大会講演概要集 2023年06月
上杉徳照
軽金属 73 104 - 111 2023年03月
Ti-V合金の変態温度に及ぼす酸素の影響の第一原理計算
上杉徳照
チタン 68 304 - 309 2020年10月
チタン合金の変態温度に及ぼす酸素の影響の第一原理計算
上杉徳照
軽金属学会 チタンの準安定相・析出相研究部会報告書 55 - 65 2020年10月
鉄鋼材料における侵入型溶質原子―置換型溶質原子のナノクラスタリング― 査読
宮本吾郎, 沼倉宏, 榎木勝徳, 上杉徳照, 大谷博司, 古原忠
まてりあ 59 128 - 133 2020年01月
1.3 チタン計算材料学 1.3.1 チタン合金の変態温度に及ぼす酸素の影響の第一原理計算
上杉徳照
軽金属学会研究部会報告書 ( 77 ) 2020年
チタンの計算材料科学
上杉徳照, 佐原亮二
軽金属学会 軽金属 67 ( 12 ) 653 - 661 2017年12月
第一原理計算の固溶体合金への展開
上杉徳照, 東健司
日本金属学会 まてりあ 53 410 - 413 2014年
企画にあたって
上杉徳照
日本金属学会 まてりあ 53 2014年
Modeling Solid Solution Strengthening Using First-Principles Results of Misfit Strain with Friedel Model in Al-Based Alloys 査読
T. Uesugi and K. Higashi
ICAA12 1421 - 1425 2010年09月
第一原理計算概論と化合物・希薄合金への摘要
上杉徳照, 東健司
株式会社 アグネ技術センター 金属 80 ( 1 ) 2010年01月
第一原理計算による固溶強化型アルミニウム合金の合金設計
上杉徳照, 東健司
軽金属学会 軽金属学会研究部会報告書 46 57 - 64 2005年04月
第一原理シミュレーションによる添加元素の最適化設計
上杉徳照, 東健司
軽金属学会 軽金属 54 ( 2 ) 82 - 89 2004年04月
製造業へのAI適用:深層学習と転移学習を駆使した検査自動化とプロセス予測 国内会議
上杉徳照
大阪公立大学産官学共同研究会第141回テクノラボツアー 2024年03月 大阪公立大学
耐疲労表面硬化材料のナノクラスター形成メカニズム解明 国内会議
上杉徳照
2023年度RISME成果報告会 2024年03月
製造業におけるマテリアルズ・インフォマティクス:深層学習と転移学習を駆使した材料検査とプロセス予測 招待 国内会議
上杉徳照
日本金属学会・日本鉄鋼協会中国四国支部研究会 2024年01月
Machine learning and first-principles calculations for mechanism of nano clustering in Fe-X-N (X = Al, Ti, V and Cr) alloys 国際会議
Tokuteru Uesugi
The 3rd Materials Research Meeting (MRM 2023) The 24th IUMRS-International Conference in Asia (IUMRS-ICA 2023) 2023年12月
機械学習と第一原理計算によるAl, Ti, V, Crを含むFe-M-N三元系合金におけるナノクラスター形成機構の解明 国内会議
上杉徳照
第33回日本MRS年次大会 2023年12月
製造業へのAI適用 招待 国内会議
上杉徳照
日本鋳造工学会関西支部令和5年度秋季講演大会 2023年11月 日本鋳造工学会
機械学習の基礎・機械学習の実践事例紹介 招待 国内会議
上杉徳照
日本鉄鋼協会関西支部・日本金属学会関西支部2023年度材料セミナー 2023年11月
深層学習と金属種間の転移学習による破断面SEM画像の分類 国内会議
上杉徳照, 濱田真行, 喜多俊輔, 平田智丈
FIT2023第22回情報科学技術フォーラム 2023年09月
機械学習と第一原理計算によるBCC鉄におけるナノクラスタリングのメカニズム 国内会議
上杉徳照
日本金属学会第173回講演大会 2023年09月 日本金属学会
機械学習を活用した球状化処理工程の自動化 国内会議
小川耕平, 堤親平, 中本光二, 上杉徳照
日本鋳造工学会第37回関西鋳造懇話会 2023年08月 日本鋳造工学会
チタンの合金設計法と計算科学 国内会議
上杉徳照
日本チタン学会第4回WEB教育講演 2023年06月 日本チタン学会
AI技術とそれの接合分野への展開可能性 招待 国内会議
上杉徳照
摩擦接合技術協会2023年度第1回研究会 2023年06月 摩擦接合技術協会
機械学習を活用した球状化処理工程の自動化 国内会議
小川耕平, 堤親平, 中本光二, 上杉徳照
日本鋳造工学会 第181回全国講演大会 2023年05月 日本鋳造工学会
機械学習を活用した溶解工程の自動化検討 国内会議
小川耕平, 上杉徳照
日本ダクタイル鋳鉄協会令和5年大会 2023年03月 日本ダクタイル鋳鉄協会
第一原理計算と機械学習によるFe-X-N (X = Al, Ti, V, Cr) 合金におけるナノクラスター形成機構の解明 国内会議
上杉徳照
第32回日本MRS年次大会 2022年12月 日本MRS
「材料科学におけるマテリアルズ・インフォマティクスの最近の発展」機械学習の基礎・機械学習の実践事例紹介 国内会議
上杉徳照
日本鉄鋼協会関西支部・日本金属学会関西支部2022年度材料セミナー 2022年11月 日本鉄鋼協会関西支部・日本金属学会関西支部
破断面ミクロ画像の分類モデルと推論用ソフトウェアの開発 国内会議
濱田真行, 上杉徳照, 金岡祐介, 喜多俊輔, 平田智丈
日本材料学会第17回フラクトグラフィシンポジウム 2022年10月 日本材料学会
第一原理計算と機械学習によるBCC鉄におけるナノクラスタリングのメカニズム解明 国内会議
上杉徳照
日本鉄鋼協会第 184 回秋季講演大 2022年09月 日本鉄鋼協会
深層学習による画像解析入門と金属破断面解析への応用 招待 国内会議
上杉徳照
ORIST(大阪産業技術研究所)技術セミナー プロジェクト研究報告会 2022年03月 大阪産業技術研究所
機械学習の基礎と実践~AIを利用したものづくりに向けて~ 国内会議
上杉徳照
ORIST(大阪産業技術研究所)技術セミナー JKA補助事業 2022年01月
深層学習による金属材料のミクロ組織・破面解析の自動化 招待 国内会議
上杉徳照
第31回日本MRS年次大会 2021年12月
「材料科学におけるマテリアルズ・インフォマティクスの最近の発展」機械学習の基礎・機械学習の実践事例紹介 国内会議
上杉徳照
日本鉄鋼協会関西支部・日本金属学会関西支部2021年度材料セミナー 2021年12月
マグネシウム合金における重み付きクロスエントロピーを用いたCNNによる結晶粒径の自動測定 国内会議
村上亮雅, 上杉徳照
軽金属学会 第141回秋期大会 2021年11月
CNNを用いた結晶粒経の自動測定手法の提案 国内会議
村上亮雅, 上杉徳照
日本材料学会第7回材料WEEK若手学生研究発表会 2021年10月
重み付きクロスエントロピーを用いたCNNによる結晶粒経の自動測定手法 国内会議
村上亮雅, 上杉徳照
日本金属学会2021年秋期(第169回)講演大会 2021年09月
金属破断面解析への人工知能の活用に向けた取り組み 国内会議
濱田真行, 近藤充晟, 上杉徳照, 喜多俊輔, 平田智丈
ORIST(大阪産業技術研究所)技術交流セミナー・ビジネスマッチングブログ第48回勉強会「AIを活用した故障対策の初歩」 2021年07月
難燃性マグネシウム合金 MIG 溶接体の高信頼化 国内会議
瀧川順庸, 上田光二, 木ノ本裕, 上杉徳照, 東健司
軽金属学会 第140回春期大会 2021年05月
合金種を考慮した深層学習による金属材料の破面分類 国内会議
上杉徳照,近藤充晟,濱田真行,喜多俊輔,平田智丈
情報処理学会 第83回全国大会 2021年03月
β型Ti合金のマルテンサイト単結晶における塑性変形挙動 国内会議
田原正樹, 上杉徳照, 細田秀樹
日本金属学会2021年春期 2021年03月
分位点回帰を用いた球状黒鉛鋳鉄のMg歩留まり予測を行う機械学習モデルの構築 国内会議
上杉徳照, 福島瑞貴, 辻川正人, 小川耕平, 澤田健二, 中本光二
日本鋳造工学会関西支部 令和2年度 秋季支部講演大会 2020年12月
機械学習によって拡張したデータを用いた低弾性チタン合金のヤング率予測モデルの構築 国内会議
三谷敦也, 上杉徳照
第30回日本MRS年次大会 2020年12月
ナノインデンテーション法による高純度Al合金の局所力学特性評価 国内会議
望月喬史,佐藤領,小畠淳平,上杉徳照,瀧川順庸
日本材料学会第6回材料WEEK若手学生研究発表会 2020年10月
線形近似によって拡張したデータを用いたニューラルネットワークによる低弾性チタン合金のヤング率予測モデルの構築 国内会議
三谷敦也,上杉徳照
日本材料学会第6回材料WEEK若手学生研究発表会 2020年10月
Mg処理球状黒鉛鋳鉄におけるMg歩留まりの分位点回帰による機械学習モデルの構築 国内会議
福島瑞貴,上杉徳照,小川耕平,澤田健二,中本光二
日本材料学会第6回材料WEEK若手学生研究発表会 2020年10月
CNNを用いた金属組織画像の結晶粒径測定に適したデータ拡張 国内会議
上杉徳照
情報処理学会関西支部 支部大会 2020年09月
港湾鋼構造物の腐食を防止する Al-Mg-Ca 溶射皮膜の開発 国内会議
上杉徳照, 東健司
第40回防錆防食技術発表大会 2020年07月
球状黒鉛鋳鉄における残Mg量管理のための分位点回帰による機械学習モデルの構築 国内会議
上杉徳照, 福島瑞貴, 辻川正人, 小川耕平, 澤田健二, 中本光二
日本鋳造工学会 第176回全国講演大会 2020年05月
難燃性マグネシウム合金MIG溶接体の高信頼化指針 国内会議
瀧川順庸, 上田光二, 木ノ本裕, 上杉徳照, 東健司
軽金属学会 第138回春期大会 2020年05月
溶解工程における機械学習を活用した自動化
小川耕平, 上杉徳照
日本ダクタイル鋳鉄協会令和6年大会
非金属介在物の自動領域識別方法およびそれを組み込んだ介在物判別システム
上杉徳照, 和田恭学, 藤松威史
定量評価装置、定量評価プログラム、および学習モデル生成プログラム
小川 耕平, 堤 親平, 上杉 徳照, 中島 智晴
黒鉛球状化処理装置、学習装置、および、マグネシウム投入量の決定方法
上杉 徳照, 小川 耕平
アルミニウム合金線、架空送電線、及びアルミニウム合金線の製造方法
岡本 紳哉, 岩山 功, 桑原 鉄也, 北村 真一, 赤祖父 保広, 東 健司, 瀧川 順庸, 上杉 徳照, 長野 宏治, 渡部 雅人
アルミニウム系合金の溶射材料および溶射皮膜
東 健司, 井上 博之, 上杉 徳照
鉛フリーはんだ合金
濱田 真行, 東 健司, 瀧川 順庸, 上杉 徳照, 森 雄基
マグネシウム合金押出し材およびその製造方法
平井 勤二, 東 健司, 瀧川 順庸, 上杉 徳照
溶加材、マグネシウム(Mg)合金材料と溶加材との接合構造、マグネシウム(Mg)合金材料の溶融溶接による接合方法、マグネシウム(Mg)合金材料接合構造体、及びマグネシウム(Mg)合金材料接合構造体の製造方法
上田 光二, 木ノ本 裕, 瀧川 順庸, 東 健司, 上杉 徳照
アルミニウム合金線
丹治 亮, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
マグネシウム合金
平井 勤二, 東 健司, 瀧川 順庸, 上杉 徳照
アルミニウム合金
丹治 亮, 中井 由弘, 西川 太一郎, 東 健司, 瀧川 順庸, 上杉 徳照
鉛フリーはんだ
濱田 真行, 高木 督, 東 健司, 瀧川 順庸, 上杉 徳照
銅合金およびその製造方法ならびに銅合金を用いた電線・ケーブル
丹治 亮, 桑原 鉄也, 西川 太一郎, 中井 由弘, 東 健司, 瀧川 順庸, 上杉 徳照
機械学習による材料製造プロセスの最適化
深層学習による材料計測に対する自動化
機械学習による材料製造プロセスの最適化
深層学習による材料計測に対する自動化
機械学習と第一原理計算による形状記憶合金の起源解明と理論設計
基盤研究(C) 2025年
機械学習と第一原理計算による形状記憶合金の起源解明と理論設計
基盤研究(C) 2024年
機械学習と第一原理計算による形状記憶合金の起源解明と理論設計
基盤研究(C) 2023年
金属組織を自動評価する人工知能の開発
2020年
形状可変材料のドメインホモ界面ダイナミクスの学理究明と高機能化原理の確立
2018年
第一原理計算に基づいた強度と延性に優れたアルミニウム合金の開発
2017年
形状可変材料のドメインホモ界面ダイナミクスの学理究明と高機能化原理の確立
2017年
第一原理計算に基づいた強度と延性に優れたアルミニウム合金の開発
2016年
形状可変材料のドメインホモ界面ダイナミクスの学理究明と高機能化原理の確立
2016年
形状可変材料のドメインホモ界面ダイナミクスの学理究明と高機能化原理の確立
2015年
第一原理計算に基づいた強度と延性に優れたアルミニウム合金の開発
2015年
形状可変材料のドメインホモ界面ダイナミクスの学理究明と高機能化原理の確立
2014年
知識情報システム学演習3
2024年度 週間授業 大学
知識情報システム学演習1
2024年度 週間授業 大学
材料情報学特論
2024年度 週間授業 大学院
学際情報学特別研究1
2024年度 集中講義 大学院
学際情報学特別演習1
2024年度 集中講義 大学院
知識情報システム学演習I
2024年度 週間授業 大学
知識情報システム学英語演習
2024年度 集中講義 大学
知識情報システム学概論
2024年度 週間授業 大学
材料情報学
2024年度 週間授業 大学
知識情報システム学演習4
2024年度 週間授業 大学
学際情報学特別研究2
2024年度 集中講義 大学院
学際情報学特別演習2
2024年度 集中講義 大学院
知識情報システム学卒業研究
2024年度 集中講義 大学
材料情報学特論
2023年度 週間授業 大学院
学際情報学特別研究1
2023年度 集中講義 大学院
学際情報学特別演習1
2023年度 集中講義 大学院
知識情報システム学演習1
2023年度 週間授業 大学
知識情報システム学卒業研究
2023年度 集中講義 大学
知識情報システム学英語演習
2023年度 集中講義 大学
知識情報システム学演習III
2023年度 週間授業 大学
知識情報システム学演習I
2023年度 週間授業 大学
学際情報学特別研究2
2023年度 集中講義 大学院
学際情報学特別演習2
2023年度 集中講義 大学院
知識情報システム学概論
2023年度 週間授業 大学
材料情報学
2023年度 週間授業 大学
知識情報システム学演習IV
2023年度 週間授業 大学
材料情報学特論
2022年度 週間授業 大学院
学際情報学特別研究1
2022年度 集中講義 大学院
学際情報学特別演習1
2022年度 集中講義 大学院
学際情報学特別研究2 (中百舌鳥)
2022年度 集中講義 大学院
学際情報学特別演習2 (中百舌鳥)
2022年度 集中講義 大学院
知識情報システム学演習III
2022年度 週間授業 大学
知識情報システム学英語演習
2022年度 集中講義 大学
知識情報システム学演習I
2022年度 週間授業 大学
知識情報システム学演習I
2022年度 週間授業 大学
知識情報システム学演習I
2022年度 週間授業 大学
知識情報システム学概論
2022年度 週間授業 大学
知識情報システム学演習II
2022年度 週間授業 大学
知識情報システム学卒業研究
2022年度 集中講義 大学
知識情報システム学演習IV
2022年度 週間授業 大学
材料情報科学
2022年度 週間授業 大学
知識情報システム学演習II
2021年度
知識情報システム学演習I
2021年度
知識情報システム学演習III
2021年度
知識情報システム学特別演習B
2021年度
知識情報システム学特別演習A
2021年度
知識情報システム学卒業研究
2021年度
知識情報システム学英語演習
2021年度
初年次ゼミナール【身の回りのマテリアルの過去と現在を考える】
2021年度
情報基礎(情報社会と情報倫理を含む。)
2021年度
材料情報科学特論
2021年度
知識情報システム学演習I
2021年度
知識情報システム学演習I
2021年度 実習
材料情報科学
2021年度
知識情報システム学演習IV
2021年度
高大接続セミナー高校教育の変化と展開:「総合的な探究の時間」と大学教育との接続 2023年度
第2回教育改革フォーラム「大学における生成AIの活用について考える―教職員・学生の活用事例から」 2023年度
2023年度FD/SD研修「大阪公立大学における障がい学生支援を考える」 2023年度
大阪公立大学全学FD「初年次ゼミナール実践事例共有会」 2023年度
第2回FD研究会「大阪公立大学におけるFDのあり方について考える(2)」 2023年度
工学FDセミナー『高等学校における学習指導要領改定に伴う情報科教育の今』 2023年度
第2回大学教育研究セミナー「大学院生のキャリアデザイン支援を考えるー文学・理学など基礎系研究分野の支援事例を中心にー」 2023年度
FD研修会「ChatGPTと大学教育 - 対話型AIが教育現場にもたらすインパクトと対応策」 2023年度
全学FDセミナー『feedback studio と webクリッカー 教育をよりインタラクティブにする2つのツールの活用法』 2022年度
工学FDセミナー『教育改善のための、ポートフォリオシステム 「てぃら・みす」活用法』 2022年度
第1回教育改革フォーラム「あらためてFaculty Developmentについて考える」 2022年度
全学FDセミナー第1回大学教育研究セミナー「学修成果の可視化について考える:OCU指標の振り返りを中心に」 2022年度
第1回FD研究会 大阪公立大学におけるFDのあり方について考える(1) 2022年度
2023年度
卒業論文指導数:1名 卒業論文審査数:1件
博士前期課程学生指導数:0名 博士後期課程学生指導数:0名
修士論文審査数(主査):1件 修士論文審査数(副査):2件
博士論文審査数(主査):0件 博士論文審査数(副査):0件
2022年度
卒業論文指導数:2名 卒業論文審査数:2件
博士前期課程学生指導数:2名 博士後期課程学生指導数:0名
修士論文審査数(主査):2件 修士論文審査数(副査):0件
博士論文審査数(主査):0件 博士論文審査数(副査):0件
2021年度
卒業論文指導数:1名 卒業論文審査数:1件
博士前期課程学生指導数:2名
修士論文審査数(副査):1件
2020年度
卒業論文指導数:3名 卒業論文審査数:3件
奈良県立国際高等学校出前講義「データサイエンス講座①・②」
役割:講師
種別:出張講義
奈良県立国際高等学校 2022年12月 - 2023年01月
大阪府立生野高等学校模擬授業
2021年07月
その他公開講座 材料情報科学
2021年04月 - 2022年03月
イノベーションジャパン2020に出展
2020年09月 - 2020年11月
その他公開講座 材料情報科学
2020年04月 - 2021年03月
不良品を見逃さない! AIを用いた水道管などの品質検査システムを開発 インターネットメディア
大阪公立大学 2024年03月
SDGs:
不良品を見逃さない! 大阪公立大が企業と品質の程度を評価するAIシステム開発 社会インフラを安全供給 インターネットメディア
文教速報デジタル版 2024年03月
SDGs:
AIを用いた水道管などの品質検査システムを開発 インターネットメディア
アドコム・メディア 2024年03月
SDGs:
大阪公立大と大阪産技研/金属破壊分析の学習手法開発/AIと協働 インターネットメディア
鉄鋼新聞 電子版 2023年06月
SDGs:
AIと協働し匠の技術を継承!金属の破壊原因を分析するための新たな学習手法を開発 インターネットメディア
大阪公立大学 2023年06月
SDGs:
大阪公立大など、AIで金属破壊原因分析 専門家育成に インターネットメディア
NIKKEI Tech Foresight 2023年06月
SDGs:
人工知能が切り拓くものづくりのスマート化
分野:現代システム科学(知識情報システム,環境システム,教育福祉,心理学), 工学(機械,電子・物理,電気電子,電機情報,化学バイオ,建築,都市(土木・環境),物質化学,航空宇宙,海洋システム,応用化学,化学,マテリアル)
研究職歴
2019年04月 - 継続中
大阪府立大学大学院人間社会システム科学研究科 准教授
研究職歴
2017年04月 - 継続中
大阪府立大学大学院工学研究科 准教授
研究職歴
2013年04月 - 継続中
大阪府立大学大学院工学研究科 講師
研究職歴
2007年04月 - 継続中
大阪府立大学大学院工学研究科 助教
研究職歴
2005年04月 - 2007年03月
大阪府立大学大学院工学研究科 助手