2023年度　シンポジウム賞（奨励賞）

大﨑　修司

2024.03   (公社)化学工学会 粒子・流体プロセス部会   連続式二軸造粒機における充填率と結合液添加率が造粒プロセスに与える影響

研究奨励賞（實吉雅郎記念賞）

2023.03   公益社団法人　化学工学会   数値シミュレーションを用いた粉体圧縮プロセスの解析

第38回製剤と粒子設計シンポジウム ベストプレゼン賞

2021.11   粉体工学会 製剤と粒子設計部会  

APT2021 Young KONA Award

2021.10   8th Asian Particle Technology Symposium  

国際粉体工業展 東京2020 優秀研究賞

2020.11   一般社団法人日本粉体工業技術協会  

2016年度(第35回)粉体工学会論文賞

2017   粉体工学会  

2015年度 粉体工学会春期研究発表会 ベストプレゼンテーション賞

2015.05   粉体工学会  

7th Biennial Australian Colloidal & Interface Symposium Poster Award ~ 1st Prize

2015.02   Australian Colloidal & Interface Symposium  

第64回コロイドおよび界面化学討論会 ポスター賞

2013.09   日本化学会 コロイドおよび界面化学部会  

Prediction of granule properties for pesticide formulations using pressure transmission of wet kneaded powder Reviewed

Momoko Sugimoto, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   36 ( 12 )   105127 - 105127   2025.12（ ISSN:0921-8831 ）

Computational analysis to identify key factors governing drug encapsulation of cyclodextrin-based metal–organic frameworks Reviewed

Ayumi Ohashi, Kazuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Journal of Pharmaceutics   686   126294 - 126294   2025.12（ ISSN:0378-5173 ） （ eISSN:1873-3476 ）

Deep understanding of relations between internal tablet structure and die wall pressure fluctuations in rotary tableting machines Reviewed

Yusuke Imayoshi, Keigo Hanyu, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Journal of Pharmaceutics   684   126115 - 126115   2025.11（ ISSN:0378-5173 ） （ eISSN:1873-3476 ）

Coarse-grained DEM simulation for mixing and segregation of binary-sized particles Reviewed

Naoki Kishida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Advanced Powder Technology   36 ( 6 )   104875 - 104875   2025.06（ ISSN:0921-8831 ）

Effect of the Aggregate Structure of Metal-Organic Framework Particles on Compressibility and Adsorption Performance Reviewed

Shuji Ohsaki, Kohei Takaoka, Akito Teranishi, Hideya Nakamura, Satoru Watano

Journal of the Society of Powder Technology, Japan   62 ( 5 )   280 - 287   2025.05（ ISSN:0386-6157 ） （ eISSN:1883-7239 ）

Elucidation of the capping mechanism during the high-speed tableting process based on FEM simulation and fracture mechanics analysis Reviewed

Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Journal of Pharmaceutical Sciences   114 ( 6 )   103784 - 103784   2025.04（ ISSN:0022-3549 ）

Influence of Solvents on Drug Loading Capacity of Metal–Organic Frameworks Focusing on Solvent Dipole Moment Reviewed

Kazuki Ohshima, Keisuke Mizomichi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Langmuir   41 ( 12 )   8117 - 8124   2025.03（ ISSN:0743-7463 ） （ eISSN:1520-5827 ）

Surrogate model of DEM simulation for binary-sized particle mixing and segregation Reviewed

Naoki Kishida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Powder Technology   455   120811 - 120811   2025.02（ ISSN:0032-5910 ）

Optimizing data-sampling period in a machine learning-based surrogate model for powder mixing simulations Reviewed

Naoki Kishida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Powder Technology   452   120584 - 120584   2025.02（ ISSN:0032-5910 ）

Application of cyclodextrin-based metal-organic frameworks for multi-drug carriers: A combined experimental and simulation study Reviewed

Ayumi Ohashi, Kazuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Journal of Pharmaceutics   670   125104 - 125104   2025.02（ ISSN:0378-5173 ）

Numerical Analysis of Powder Compaction and Tensile Test by Using Multi Particle Finite Element Method Reviewed

Shuji Ohsaki, Yusuke Imayoshi, Koki Ogawa, Hideya Nakamura, Satoru Watano

Journal of the Society of Powder Technology, Japan   61 ( 8 )   486 - 492   2024.08（ ISSN:0386-6157 ） （ eISSN:1883-7239 ）

Effect of cholesterol on nanoparticle translocation across a lipid bilayer Reviewed

Masaya Tajima, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Physical Chemistry Chemical Physics   26 ( 31 )   21229 - 21239   2024.07（ ISSN:1463-9076 ） （ eISSN:1463-9084 ）

Continuous synthesis of drug particles via spray drying of emulsions obtained by mechanical emulsification and ouzo effect Reviewed

Oshiro Atsushi, Akihiro Hatada, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Powder Technology   442   119878 - 119878   2024.05（ ISSN:0032-5910 ）

A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities Reviewed

Takeru Yano, Atsushi Oshiro, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   72 ( 4 )   374 - 380   2024.04（ ISSN:0009-2363 ） （ eISSN:1347-5223 ）

Effect of reaction temperature and impact force on formation and particle shape of β-Li3PS4 in liquid phase synthesis Reviewed

Chinatsu Tatsuda, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   35 ( 4 )   104408 - 104408   2024.04（ ISSN:0921-8831 ）

Numerical Analysis of Compression Properties of the Binary Mixture of Powder with Different Particle Plasticities Reviewed

Takeru Yano, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Journal of the Society of Powder Technology, Japan   61 ( 3 )   144 - 153   2024.03（ ISSN:0386-6157 ） （ eISSN:1883-7239 ）

Quantitative analysis of wet kneading states by a novel compression test Reviewed

Jonosuke Matsumoto, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   35 ( 2 )   104336 - 104336   2024.02（ ISSN:0921-8831 ）

Relationship between the agitation torque of the wet iron ore powder and pellet properties Reviewed

Kensuke Kumeda, Hideya Nakamura, Shuji Ohsaki, Satoru Watano, Shohei Fujiwara, Yuji Iwami, Akinori Murao

ISIJ International   65 ( 1 )   62 - 69   2024（ ISSN:0915-1559 ） （ eISSN:1347-5460 ）

Compression properties of bimodal powders with different plasticities in the elastoplastic powder compression process: A numerical analysis Reviewed

Takeru Yano, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   34 ( 12 )   104245 - 104245   2023.12（ ISSN:0921-8831 ）

Statistical analysis of electrode fabrication process for all-solid-state batteries and effects of electrode fabrication conditions on battery performance Reviewed

Takashi Kawaguchi, Hideya Nakamura, Eiji Hayakawa, Shuji Ohsaki, Satoru Watano

Advanced Powder Technology   34 ( 12 )   104264 - 104264   2023.12（ ISSN:0921-8831 ）

Development of ultra-fast computing method for powder mixing process Reviewed

Naoki Kishida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Chemical Engineering Journal   475   146166 - 146166   2023.09（ ISSN:1385-8947 ）

Numerical study on deposition of non-spherical shaped particles in cascade impactor Reviewed

Ryosuke Mitani, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   34 ( 6 )   104045 - 104045   2023.06（ ISSN:0921-8831 ）

Continuous Compositing Process of Sulfur/Conductive‐Additive Composite Particles for All‐Solid‐State Lithium Sulfur Batteries Reviewed

Motoshi Iwao, Hiromi Miyamoto, Hideya Nakamura, Eiji Hayakawa, Shuji Ohsaki, Satoru Watano

Advanced Energy and Sustainability Research   5 ( 8 )   2023.03（ ISSN:2699-9412 ） （ eISSN:2699-9412 ）

Design of active-material/solid-electrolyte composite particles with conductive additives for all-solid-state lithium-ion batteries Reviewed

Eiji Hayakawa, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Journal of Power Sources   555   232379 - 232379   2023.01（ ISSN:0378-7753 ）

Optimum Water Content Estimation for Wet Granulation of Iron Ore Powders with Quicklime Binder Reviewed

Shota Yokokawa, Hideya Nakamura, Tomotaka Otsu, Shuji Ohsaki, Satoru Watano, Shohei Fujiwara, Takahide Higuchi

ISIJ International   63 ( 4 )   670 - 677   2023（ ISSN:0915-1559 ） （ eISSN:1347-5460 ）

連続式二軸造粒機における充填率と結合液添加率が造粒プロセスに与える影響に関する実験および数値解析 Reviewed

松下 美卯，大崎 修司，仲村 英也，綿野 哲

粉体工学会誌   60 ( 12 )   720 - 728   2023（ ISSN:03866157 ）

Development of a simple in-die method for determination of capping tendency in rotary tableting machines Reviewed

Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   71 ( 7 )   566 - 575   2023（ ISSN:0009-2363 ） （ eISSN:1347-5223 ）

Enhancement of cell membrane permeability by using charged nanoparticles and a weak external electric field Reviewed

Hideya Nakamura, Takumi Okamura, Masaya Tajima, Ryuji Kawano, Misa Yamaji, Shuji Ohsaki, Satoru Watano

Physical Chemistry Chemical Physics   25 ( 47 )   32356 - 32363   2023（ ISSN:1463-9076 ） （ eISSN:1463-9084 ）

圧縮速度を考慮した打錠プロセスの数値解析手法 Reviewed

大崎 修司

粉体工学会誌   60 ( 2 )   79 - 83   2023（ ISSN:03866157 ）

全固体電池に用いる硫化物系固体電解質粒子の湿式粉砕と活物質ー固体電解質乾式コーティングへの応用 Reviewed

仲村 英也，益山 朋之，大崎 修司，綿野 哲

粉体工学会誌   60 ( 9 )   559 - 566   2023（ ISSN:03866157 ）

Effect of fill level in continuous twin-screw granulator: A combined experimental and simulation study Reviewed

Miu Matsushita, Shuji Ohsaki, Sanae Nara, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   33 ( 11 )   103822 - 103822   2022.11（ ISSN:09218831 ）

Continuous measurement of die wall pressure in a rotary tablet machine Reviewed

Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Journal of Pharmaceutics   627   122251 - 122251   2022.10（ ISSN:0378-5173 ）

Dry mixing of cathode composite powder for all-solid-state batteries using a high-shear mixer Reviewed

Eiji Hayakawa, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Advanced Powder Technology   33 ( 8 )   103705 - 103705   2022.08（ ISSN:0921-8831 ）

pH dependence of drug release behavior from metal-organic framework particle with different acid-base resistances Reviewed

Kohei Akagi, Kazuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Inorganica Chimica Acta   542   121143 - 121143   2022.08（ ISSN:0020-1693 ）

Solid electrolyte/graphite composite particle for an all-solid-state lithium-ion battery Reviewed

Motoshi Iwao, Risa Sakurai, Hideya Nakamura, Eiji Hayakawa, Shuji Ohsaki, Satoru Watano

Advanced Powder Technology   33 ( 7 )   103633   2022.07

Numerical simulation of wet granulation using the DEM–PBM coupling method with a deterministically calculated agglomeration kernel Reviewed

Hideya Nakamura, Tomoya Baba, Shuji Ohsaki, Satoru Watano, Kenta Takehara, Takahide Higuchi

Chemical Engineering Journal   450   138298 - 138298   2022.07（ ISSN:1385-8947 ）

Mechanism of Solubility Enhancement of Poorly Water-Soluble Drugs Triggered by Zeolitic Imidazolate Frameworks

Kazuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   70 ( 5 )   383 - 390   2022.05（ ISSN:0009-2363 ） （ eISSN:1347-5223 ）

経口徐放性製剤の溶出過程の直接観察と律速段階の解明 Reviewed

大崎修司，赤木航平，仲村英也，綿野 哲

粉体工学会誌   59 ( 4 )   160 - 166   2022.04（ ISSN:03866157 ）

Characterization of solid-electrolyte/active-material composite particles with different surface morphologies for all-solid-state batteries Reviewed

Eiji Hayakawa, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

ISIJ International   33 ( 3 )   103470   2022.03

Determining Optimum Water Content for Iron Ore Granulation using Agitation Torque of Wet Ore Powder Reviewed

Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, Satoru Watano, Shohei Fujiwara, Takahide Higuchi

粉体工学会誌   62 ( 7 )   1381 - 1388   2022（ ISSN:0915-1559 ） （ eISSN:1347-5460 ）

Coarse-grained discrete element simulation of particle flow and mixing in a vertical high-shear mixer Reviewed

Naoki Kishida, Hideya Nakamura, Hiroharu Takimoto, Shuji Ohsaki, Satoru Watano

Powder Technology   390   1 - 10   2021.09

Neural Network を用いた医薬品固形製剤の連続生産プロセスの解析 Reviewed

松岡由香里， 大崎修司， 仲村英也， 綿野哲

58 ( 8 )   414 - 423   2021.08

Parameter calibration of discrete element method modelling for cohesive and non-spherical particles of powder Reviewed

Chiho Hoshishima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Powder Technology   386   199 - 208   2021.07

Size control of sulfide-based solid electrolyte particles through liquid-phase synthesis Reviewed

Shuji Ohsaki, Takeru Yano, Akihiro Hatada, Hideya Nakamura, Satoru Watano

Powder Technology   387   415 - 420   2021.07

Improvement of solubility of sparingly water-soluble drug triggered by metal-organic framework Reviewed

Shuji Ohsaki, Hiroki Satsuma, Hideya Nakamura, Satoru Watano

Journal of Drug Delivery Science and Technology   63   2021.06

レイヤリング造粒における粒子積層の数値シミュレーション Reviewed

仲村 英也, 河田 晟生, 馬場 智也, 大崎 修司, 綿野 哲

107 ( 6 )   394 - 402   2021.05

Numerical study on compression processes of cohesive bimodal particles and their packing structure Reviewed

Takeru Yano, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Advanced Powder Technology   32 ( 5 )   1362 - 1368   2021.05

Direct translocation of a negatively charged nanoparticle across a negatively charged model cell membrane Reviewed

Yoko Ikeda , Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Physical Chemistry Chemical Physics   23 ( 17 )   10591 - 10599   2021.04

粉末吸入製剤の口腔内における付着現象の解析 Reviewed

三谷 亮介， 大崎 修司， 仲村 英也， 綿野 哲

58 ( 3 )   127 - 137   2021.03

Numerical study on spray drying process: effect of nonuniform temperature field and interaction between droplets on evaporation rates of individual droplets Reviewed

Sayaka Okada, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   69 ( 2 )   203 - 210   2021.02

DEM–PBM coupling method for the layering granulation of iron ore Reviewed

Tomoya Baba, Hideya Nakamura, Hiroharu Takimoto, Shuji Ohsaki, Satoru Watano, Kenta Takehara, Takahide Higuchi, Toshiyuki Hirosawa, Tetsuya Yamamoto

Powder Technology   378 ( 22 )   40 - 50   2021.01

Coarse-grained discrete element method for granular shear flow Reviewed

Hideya Nakamura, Hiroharu Takimoto, Naoki Kishida, Shuji Ohsaki, Satoru Watano

Chemical Engineering Journal Advances   4 ( 15 )   2020.12

Numerical Study on Particle Adhesion in Dry Powder Inhaler Device

Ryosuke Mitani, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   68 ( 8 )   726 - 736   2020.08

Estimation of evaporation rate of water droplet group in spray drying process Reviewed

Sayaka Okada, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Chemical Engineering Science   227 ( 14 )   2020.07

Control of gate adsorption characteristics of flexible metal-organic frameworks by crystal defect Reviewed

Shuji Ohsaki, Riki Nakazawa, Akito Teranishi, Hideya Nakamura, Satoru Watano

Microporous and Mesoporous Materials   302 ( 1 )   2020.04

Numerical study for tableting process in consideration of compression speed Reviewed

Shuji Ohsaki, Kazune Kushida, Yu Matsuda, Hideya Nakamura, Satoru Watano

International Journal of Pharmaceutics   575 ( 15 )   2020.02

Dry coating of active material particles with sulfide solid electrolytes for an all-solid-state lithium battery Reviewed

Hideya Nakamura, Takashi Kawaguchi, Tomoyuki Masuyama, Atsushi Sakuda, Toshiya Saito, Kentaro Kuratani, Shuji Ohsaki, Satoru Watano

Journal of Power Sources   448 ( 1 )   2020.02

Flowability improvement of soft metal-organic framework particles by wet granulation Reviewed

Shuji Ohsaki, Yuka Nakahara, Hideya Nakamura, Satoru Watano

Microporous and Mesoporous Materials   293   2020.02

Effect of Particle–Wall Interaction and Particle Shape on Particle Deposition Behavior in Human Respiratory System Reviewed

Shuji Ohsaki, Ryosuke Mitani, Saki Fujiwara, Hideya Nakamura, Satoru Watano

Chemical and Pharmaceutical Bulletin   67 ( 12 )   1328 - 1336   2019.12

Direct translocation of nanoparticles across a model cell membrane by nanoparticle-induced local enhancement of membrane potential Reviewed

Hideya Nakamura, Kyohei Sezawa, Masataka Hata, Shuji Ohsaki, Satoru Watano

Physical Chemistry Chemical Physics   21   18830 - 18838   2019.09

Diffusion phenomena of propane and propylene in colloidal zeolitic imidazolate Framework-8 particles Reviewed

Shuji Ohsaki, Yuki Morimoto, Satoshi Watanabe, Hideki Tanaka, Minoru T Miyahara

Journal of the Taiwan Institute of Chemical Engineers   90   79 - 84   2018.09

Continuous synthesis of nano-drug particles by antisolvent crystallization using a porous hollow-fiber membrane module Reviewed

Jennifer Chia Wee Fern, Shuji Ohsaki, Satoru Watano, Robert Pfeffer

International journal of pharmaceutics   543 ( 1-2 )   139 - 150   2018.05

Characterization of mixing performance in a microreactor and its application to the synthesis of porous coordination polymer particles

Satoshi Watanabe, Shuji Ohsaki, Akiko Fukuta, Tatsuya Hanafusa, Kento Takada, Hideki Tanaka, Taisuke Maki, Kazuhiro Mae, Minoru T.Miyahara

Advanced Powder Technology   28 ( 11 )   3104 - 3110   2017.11

Free Energy Analysis for Adsorption-Induced Structural Transition of Colloidal Zeolitic Imidazolate Framework-8 Particles Reviewed

Shuji Ohsaki, Satoshi Watanabe, Hideki Tanaka, and Minoru T. Miyahara

The Journal of Physical Chemistry C   121 ( 37 )   2017.08

Synthesis of zeolitic imidazolate framework-8 particles of controlled sizes, shapes, and gate adsorption characteristics using a central collision-type microreactor Reviewed

Satoshi Watanabe, Shuji Ohsaki, Tatsuya Hanafusa, Kento Takada, Hideki Tanaka, Kazuhiro Mae, Minoru T Miyahara

Chemical Engineering Journal   313   724 - 733   2017.04

マイクロリアクタを用いた多孔性錯体ナノ粒子合成と吸着特性解析 Reviewed

大﨑修司， 渡邉哲， 田中秀樹， 前一廣， 宮原稔

粉体工学会誌 雑誌   52 ( 12 )   707 - 713   2015.12

Microreactor flow synthesis of ZIF-8 particles with controlled size, shape and adsorption properties Reviewed

Shuji Ohsaki, Kento Takada, Satoshi Watanabe, Kazuhiro Mae, Minoru T Miyahara

Asia Pacific Confederation of Chemical Engineering Congress 2015: APCChE 2015, incorporating CHEMECA 2015   2015.09

マイクロリアクタの混合特性評価と多孔性錯体微粒子合成への適用 Reviewed

渡邉哲， 大﨑修司， 福田晃子， 花房竜也， 髙田健斗， 田中秀樹， 牧泰輔， 前一廣， 宮原稔

粉体工学会誌 雑誌   52 ( 7 )   382 - 389   2015.07

Adsorption-induced structural transition of ZIF-8: a combined experimental and simulation study Reviewed

Hideki Tanaka, Shuji Ohsaki, Shotaro Hiraide, Daigo Yamamoto, Satoshi Watanabe, Minoru T Miyahara

The Journal of Physical Chemistry C   118 ( 16 )   8445 - 8454   2014.04

薬物中空粒子の製造プロセスの最適化 Domestic conference

一法師 憧子，大崎 修司，仲村 英也，綿野 哲

化学工学会第91年会  2026.03 

噴霧乾燥法を用いた微粒子コーティングによる難水溶性薬物の溶出挙動制御 Domestic conference

三宮 みゆき，大崎 修司，仲村 英也，綿野 哲

化学工学会第91年会  2026.03 

充放電に伴う全固体電池電極構造変化の離散要素解析 Domestic conference

倉田 佳奈，巌 元志，大崎 修司，綿野 哲，仲村 英也

化学工学会第91年会  2026.03 

CFD-DPMを用いたウイルス不活化シミュレーションによる紫外線殺菌照射(UVGI)システムの性能評価 Domestic conference

鈴木 聖矢，大崎 修司，仲村 英也，綿野 哲

化学工学会第91年会  2026.03 

大きな一次元細孔を有する金属有機錯体への薬物の包接 Domestic conference

青木 唯楓，大橋 歩実，大崎 修司，仲村 英也，綿野 哲

化学工学会第91年会  2026.03 

電場印加時におけるベシクル膜ダイナミクスの分子動力学解析: ベシクルサイズの影響 Domestic conference

久保山 公貴，大崎 修司，綿野 哲，仲村 英也

化学工学会第91年会  2026.03 

電場印加によるベシクル挙動の分子動力学解析:ベシクル表面電荷の影響 Domestic conference

片岡 咲月，久保山 公貴，大崎 修司，綿野 哲，仲村 英也

化学工学会第91年会  2026.03 

脱脂粉乳の溶解速度の定量評価と無次元数を用いた相関モデルの提案 Domestic conference

谷口 陽平，池田 陸，羽生 圭吾，大崎 修司，仲村 英也，綿野 哲

第28回化学工学会学生発表会  2026.03 

噴霧乾燥法を用いた固体電解質の再合成における不純物の影響 Domestic conference

松下 真輝，尾崎 凌，大崎 修司，仲村 英也，綿野 哲

第28回化学工学会学生発表会  2026.03 

金属－有機構造体の薬物キャリアとしての応用に向けた検討 Invited Domestic conference

大崎 修司

第38回日本吸着学会研究発表会  2025.11 

Continuous Synthesis of Solid Electrolyte Particles for All-Solid-State Lithium-Ion Batteries By Spray-Drying Method International conference

Shuji Ohsaki, Ryo Osaki, Hideya Nakamura, Satoru Watano

AIChE 2025 Annual Meeting  2025.11 

Identification of Key Factors in Drug Encapsulation within Amphiphilic-Pore Metal–Organic Frameworks Using Molecular Simulations International conference

Ayumi Ohashi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

AIChE 2025 Annual Meeting  2025.11 

Numerical Analysis Using Multi-Particle Finite Element Method for Compression Process for All-Solid-State Batteries International conference

Saki Katayama, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

AIChE 2025 Annual Meeting  2025.11 

全固体電池材料を連続合成します！ Domestic conference

大崎 修司

国際粉体工業展大阪2025  2025.10 

乾式粒子コーティングによる付着性粉体の表面改質 Domestic conference

福本 奈緒,大崎 修司,仲村 英也,綿野 哲

粉体工学会2025年度秋期研究発表会  2025.10 

実験・数値シミュレーションを用いた粉体プロセスでの粒子の運動挙動解析に関する研究 Invited Domestic conference

大崎 修司

粉体工学会2025年度秋期研究発表会  2025.10 

噴霧乾燥法による異径正極活物質粒子への流通式酸化物コーティング Domestic conference

尾崎 凌,大崎 修司,仲村 英也,綿野 哲

粉体工学会2025年度秋期研究発表会  2025.10 

定容積せん断試験のDEMシミュレーションを用いた 複合粒子の力学特性の数値解析 Domestic conference

大森 敦史,大崎 修司,仲村 英也,綿野 哲

粉体工学会2025年度秋期研究発表会  2025.10 

高速撹拌混合機におけるDEMシミュレーションの高速計算代理モデルの開発 Domestic conference

市田 珠奈,大崎 修司,綿野 哲,仲村 英也

粉体工学会2025年度秋期研究発表会  2025.10 

種々の室内環境下におけるエアロゾル挙動解析と感染症対策の提案 Domestic conference

鈴木 聖矢,大崎 修司,仲村 英也,綿野 哲

粉体工学会2025年度秋期研究発表会  2025.10 

ELUCIDATION OF DRUG ADSORPTION MECHANISM OF METAL-ORGANIC FRAMEWORKS BY ELECTRIC FIELD APPLICATION AND DFT SIMULATION International conference

S. Omura, S. Ohsaki, H. Nakamura, S. Watano

6th European Conference on Metal Organic Frameworks and Porous Polymers (EuroMOF2025)  2025.09 

Development of Two-component Liquid-phase Adsorption Simulation of Drug Adsorption in MOFs International conference

K. Ohshima, S. Ohsaki, H. Nakamura, S. Watano

6th European Conference on Metal Organic Frameworks and Porous Polymers (EuroMOF2025)  2025.09 

NUMERICAL ANALYSIS OF KEY FACTORS IN DRUG ENCAPSULATION OF CYCLODEXTRIN-BASED METAL–ORGANIC FRAMEWORKS WITH AMPHIPHILIC NANOPORES International conference

A. Ohashi, S. Ohsaki, H. Nakamura, S. Watano

6th European Conference on Metal Organic Frameworks and Porous Polymers (EuroMOF2025)  2025.09 

ROLE OF STRUCTURAL DEFECTS IN MOF ON DRUG LOADING International conference

H. Kanai, S. Ohsaki, H. Nakamura, S. Watano

6th European Conference on Metal Organic Frameworks and Porous Polymers (EuroMOF2025)  2025.09 

全固体電池の圧縮過程における粒子破壊挙動に関する数値解析 Domestic conference

大崎 修司，秋山 紀子，仲村 英也，綿野 哲

化学工学会第56回秋季大会  2025.09 

ジャンプテストを用いた粉体圧縮時における粘性挙動の理解 Domestic conference

今吉 優輔，大崎 修司，仲村 英也，綿野 哲，Vincent Mazel，Pierre Tchoreloff

化学工学会第56回秋季大会  2025.09 

多粒子有限要素法を用いた電池材料圧縮プロセスの数値解析 Domestic conference

片山 紗希，大崎 修司，仲村 英也，綿野 哲

化学工学会第56回秋季大会  2025.09 

微粒子添加による全固体電池用粉体材料の流動性改善 Domestic conference

斉藤 輝馬，大崎 修司，綿野 哲，仲村 英也

化学工学会第56回秋季大会  2025.09 

粉体連続体近似から導出されたDEM粗視化モデルの開発 Domestic conference

三梨 響大，大崎 修司，綿野 哲，仲村 英也

化学工学会第56回秋季大会  2025.09 

Integrative Molecular Simulation and Multiple Regression Analysis for Drug Encapsulation in Cyclodextrin-Based Metal–Organic Frameworks Domestic conference

Ayumi Ohashi, Shuji Ohsaki, Hideya Nakamura, Watano Satoru

2025.09 

Development of Simulation Method for Liquid-phase Adsorption of Drug Molecule into MOFs Domestic conference

Kazuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

2025.09 

数値解析と重回帰分析を用いた両親媒性細孔を持つ金属有機錯体への薬物包接機構の解明 Domestic conference

大橋 歩実，大崎 修司，仲村 英也，綿野 哲

錯体化学若手の会夏の学校2025  2025.08 

大きな1次元細孔を有する有機金属錯体への中分子薬物の包接 Domestic conference

青木 唯楓，大橋 歩実，大崎 修司，仲村 英也，綿野 哲

錯体化学若手の会夏の学校2025  2025.08 

Oxide coating of cathode active material in all-solid-state batteries using spray drying method International conference

Ryo Osaki, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI) 2025  2025.07 

Experimental and numerical investigation of cyclodextrin-based MOF particles with amphiphilic pores for multiple drug carriers International conference

Ayumi Ohashi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI) 2025  2025.07 

Understanding the tablet internal structure and the capping mechanism by measuring the distribution of die wall pressure International conference

Issei Kubota, Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI) 2025  2025.07 

Effect of structural defects in MOFs on drug loading capacity" International conference

Haruki Kanai, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI) 2025  2025.07 

Effect of Liquid Bridge Force Implementation Method on DEM Simulation for Wet Powder Behavior International conference

Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Particle breakage behavior during the compression process of all-solid-state battery materials International conference

Shuji Ohsaki, Noriko Akiyama, Hideya Nakamura, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Characterizing accuracy of coarse-grained DEM for granular shear flow with rolling resistance International conference

Kyota Mitsunashi, Hideya Nakamura, Shota Yokokawa, Naoki Kishida, Shuji Ohsaki, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Surrogate model of DEM simulation of vertical high shear mixer International conference

Tamana Ichida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Investigating compression properties of solid electrolyte powders for all-solid-state lithium-ion batteries International conference

Motoshi Iwao, Hideya Nakamura, Takamasa Asano, Atsushi Sakuda, Akitoshi Hayashi, Shuji Ohsaki, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Numerical analysis of consolidation and agglomerate disintegration behavior of bimodal-sized particles under compression and shear application International conference

Hiroaki Yoshitomi, Takeru Yano, Shuji Ohsaki*, Hideya Nakamura, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Evaluation of compression properties of elastic particle molded compacts using discrete element method International conference

Sota Kubo, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Numerical approach to improve adhesive property of particles International conference

Atsushi Omori, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

10th International Conference on Discrete Element Methods (DEM10)  2025.07 

Measurement of die wall pressure and evaluation of internal tablet structure during capping occurrence International conference

Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Compaction Simulation Forum 2025  2025.06 

両親媒性細孔を有するシクロデキストリン型金属有機構造体における薬物分子包摂挙動の数値解析 Domestic conference

大橋 歩実，大崎 修司，仲村 英也，綿野 哲

第22回ホスト-ゲスト・超分子化学シンポジウム  2025.06 

Contentious synthesis of solid electrolyte particles by spray-drying method International conference

Shuji Ohsaki, Ryo Osaki, Hideya Nakamura, Satoru Watano

Advanced Battery Power Conference 2025  2025.04 

[部会賞] フロンティア賞受賞講演:機械学習を用いた粉体の流動・混合シミュレーションの代理モデル Invited Domestic conference

仲村 英也，岸田 尚樹，大崎 修司，綿野 哲

化学工学会第90年会  2025.03 

金属有機構造体MOFの薬物包接に関する液相吸着シミュレーション Domestic conference

大島 一輝，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

[依頼講演] 加熱溶融混練プロセスを用いた硫黄と多孔質炭素の複合化と全固体電池への応用 Invited Domestic conference

巌 元志，仲村 英也，大崎 修司，綿野 哲

化学工学会第90年会  2025.03 

両親媒性細孔を持つシクロデキストリン型 MOF への薬物包接機構解明に向けた数値解析 Domestic conference

大橋 歩実，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

硫黄/導電助剤/固体電解質の連続溶融混練プロセスの開発と全固体リチウム電池への応用 Domestic conference

原田 輝，巌 元志，仲村 英也，大崎 修司，綿野 哲

化学工学会第90年会  2025.03 

粒子強度と打錠特性の関係 Domestic conference

服部 美緑，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

難造粒性鉄鉱石の造粒特性と粉体レオロジーの関係 Domestic conference

高尾 侑花，仲村 英也，大崎 修司，綿野 哲， 藤原 頌平，岩見 友司

化学工学会第90年会  2025.03 

乾式電極作製プロセスにおける電極抵抗と導電助剤の分散状態 Domestic conference

近藤 菜美，大崎 修司，仲村 英也，綿野 哲，厚母 賢

化学工学会第90年会  2025.03 

成形不良の発生予測手法開発に向けた錠剤内部の応力分布測定 Domestic conference

久保田 一成，今吉 優輔，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

離散要素法を用いた弾性粒子成型体の圧縮特性評価 Domestic conference

久保 奏太，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

MOFにおける構造の欠陥が薬物包接能に及ぼす影響 Domestic conference

金井 治樹，大島 一輝，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

新規な小型流動層型ジェットミルの開発とその粉砕性能の評価 Domestic conference

片山 可奈子，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

数値シミュレーションによるエアロゾルの運動挙動解析 Domestic conference

鈴木 聖矢，大崎 修司，仲村 英也，綿野 哲

化学工学会第90年会  2025.03 

PTFE fibrillation by dry powder mixing and its application to electrode fabrication for all-solid-state battery International conference

Hideya Nakamura, Shota Miyake, Motoshi Iwao, Shuji Ohsaki, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

ラマン測定を用いた MOF の薬物包接への溶媒効果の検討 Domestic conference

大島 一輝，大崎 修司，仲村 英也，綿野 哲

吸着－ゼオライト合同研究発表会（第37回日本吸着学会研究発表会、第40回ゼオライト研究発表会）  2024.12 

Size control of solid electrolyte particles by spraydrying method International conference

Ryo Osaki, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Hot-melt kneading process of sulfur and porous carbon for all-solid state lithium sulfur batteries International conference

Motoshi Iwao, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Molecular simulation of multi-drug encapsulation into metal-organic framework with amphiphilic pores International conference

Ayumi Ohashi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Improvement of drug loading capacity into metalorganic frameworks by electric field application International conference

Soma Omura, Kazuki Oshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Relationship between powder rheology of wet iron ore powder and its granule strength International conference

Kensuke Kumeda, Hideya Nakamura, Shuji Ohsaki, Satoru Watano, Shohei Fujiwara, Yuji Iwami, Akinori Murao

9th Asian Particle Technology Symposium  2024.12 

Internal structure evaluation during tablet compaction using multiparticle finite element method International conference

Natsuki Miura, Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Elucidation of granulation mechanism of pressure swing granulation: a combined experimental and simulation study International conference

Tomoyuki Hirota, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Simulation of slurry filling in cosmetics manufacturing International conference

Momoko Sugimoto, Shuji Ohsaki, Hideya Nakamura, Satoru Watano, Keisuke Terada, Kazuhiro Nishimi, Shuji Hasegawa

9th Asian Particle Technology Symposium  2024.12 

Numerical simulation of upper airway in sleep apnea International conference

Ami Takahashi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Sensitivity analysis of DEM parameters on bulk powder properties International conference

Kinuko Hayashi, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Numerical analysis on dominant factors affecting flow ability of composite particles International conference

Atsushi Omori, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Granular shear flow criteria for accuracy of coarsegrained DEM International conference

Kyota Mitsunashi, Shota Yokokawa, Hideya Nakamura, Naoki Kishida

9th Asian Particle Technology Symposium  2024.12 

High speed simulation of powder mixing in bidisperse particle systems International conference

Naoki Kishida, Hideya Nakamura, Ohsaki Shuji, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

Influence of the calculation method of liquid bridge force model on DEM simulation of wet powder behavior International conference

Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

9th Asian Particle Technology Symposium  2024.12 

固形化粉ミルクの加湿乾燥工程の高速化検討 Domestic conference

羽生 圭吾，大崎 修司，仲村 英也，綿野 哲

粉体工学会2024年度秋期研究発表会  2024.11 

Numerical Analysis of Particle Motion in a Continuous Twin-Screw Granulator Invited International conference

Shuji Ohsaki

ATCx Discrete Element Method  2024.11 

Powder compression and particle synthesis for all-solid-state battery Invited International conference

Shuji Ohsaki

The Forge 2024  2024.11 

ジャンプテストによる医薬品粉体の粘性挙動解析 Domestic conference

今吉 優輔，大崎 修司，仲村 英也，綿野 哲

第41回製剤と粒子設計シンポジウム  2024.11 

ナノ粒子の細胞膜透過を記述する数理モデルの提案 Domestic conference

柏井 梨花，仲村 英也，大崎 修司，綿野 哲

化学工学会第55回秋季大会  2024.09 

両親媒性細孔を持つシクロデキストリン型 MOF 粒子への複数薬物包摂に関する数値シミュレーション Domestic conference

大橋 歩実，大崎 修司，仲村 英也，綿野 哲

化学工学会第55回秋季大会  2024.09 

大小二成分混合系の圧縮成型過程における粒子破壊に関する数値解析 Domestic conference

秋山 紀子，大崎 修司，仲村 英也，綿野 哲

化学工学会第55回秋季大会  2024.09 

量子化学計算と分子シミュレーションを組み合わせたMOFの薬物包接現象の解析 Domestic conference

大島 一輝，大崎 修司，仲村 英也，綿野 哲

化学工学会第55回秋季大会  2024.09 

粉体圧縮プロセスでの成型不良発生時における壁面応力測定と錠剤内部構造評価 Domestic conference

今吉 優輔，大崎 修司，仲村 英也，綿野 哲

化学工学会第55回秋季大会  2024.09 

Comprehensive Evaluation of Liquid Beidge Force Model Implementations on DEM Simulations of Wet Powder Flow International conference

Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Advances in Particle Technology (AiPT) 2024  2024.09 

Hot-Melt Kneading Process to Compasite Sulfur with Porous Carbon for All-Solid State Batteries International conference

Motoshi Iwao, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

Advances in Particle Technology (AiPT) 2024  2024.09 

Experimental and Numerical Analysis of Compression Processes for Batteries and Pharmaceutics Invited International conference

Shuji Ohsaki, Takeru Yano, Yusuke Imayoshi, Hideya Nakamura, Satoru Watano

Advances in Particle Technology (AiPT) 2024  2024.09 

Prediction of Powder Mixing by DEM Surrogate Model based on Machine Learning Coupled with Stochastic Model Invited International conference

Hideya Nakamura, Naoki Kishida, Tamana Ichida, Shuji Ohsaki, Satoru Watano

Advances in Particle Technology (AiPT) 2024  2024.09 

多孔性配位錯体への薬物の液相吸着シミュレーション Domestic conference

大島一輝，大崎修司，仲村英也，綿野哲

第33回吸着シンポジウム 「吸着夏の学校」  2024.09 

Influence of the implementation method of liquid bridge force model on DEM simulation results of wet powder vehavior International conference

Tomotaka Otsu, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

11th International Conference on Conveying and Handling of Particulate Solids  2024.09 

Characterizing sulfur/porous-carbon composite particles prepared from the hot-melt kneading process for all-solid state batteries International conference

Motoshi Iwao, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

11th International Conference on Conveying and Handling of Particulate Solids  2024.09 

DEM analysis of compression process of cohesive elastoplastic powder International conference

Shuji Ohsaki, Takeru Yano, Hideya Nakamura, Satoru Watano

11th International Conference on Conveying and Handling of Particulate Solids  2024.09 

多孔性金属錯体粒子の凝集体構造が圧縮成型性および吸着性能に及ぼす影響 Domestic conference

大崎 修司，髙岡 皓平，仲村 英也，綿野 哲

第58回技術討論会  2024.07 

High speed computing for mixing of bi-disperse particles in a rotating drum International conference

Naoki Kishida, Hideya Nakamura, Shuji Ohsaki, Satoru Watano

16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics  2024.07 

A DEM-based surrogate model for powder mixing Invited International conference

Hideya Nakamura, Naoki Kishida, Shuji Ohsaki, Satoru Watano

16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics  2024.07 

連続式二軸造粒機における粒子運動に関する数値解析 Invited Domestic conference

大崎 修司

Altair Tech Day 2024  2024.07 

Evaluation of multiple drug inclusion in cyclodextrin-MOF with aid of molecular simulation International conference

Ayumi Ohashi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th International Conference on Metal-Organic Frameworks & Open Framework Compounds  2024.07 

Elucidation of Mechanism of Drug Encapsulation into MOFs Focusing on Effect of Solvent by Raman Spectroscopy Measurements International conference

Kasuki Ohshima, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

9th International Conference on Metal-Organic Frameworks & Open Framework Compounds  2024.07 

Effect of granulation method on aggregation structure and adsorption properties of flexible MOF granules International conference

Shuji Ohsaki, Natsuki Miura, Kohei Takaoka, Hideya Nakamura, Satoru Watano

9th International Conference on Metal-Organic Frameworks & Open Framework Compounds  2024.07 

湿潤粉体レオロジー特性を用いた微粉鉄鉱石造粒プロセスの設計 Invited Domestic conference

仲村 英也，粂田 憲甫，市田 珠奈，大崎 修司，綿野 哲，藤原 頌平，岩見 友司，村尾 明紀

製銑科学技術コンソーシアム 第３回産学連携研究委員会  2024.07 

Elucidation of capping mechanism during high-speed tableting process using FEM simulation based on the fracture mechanics International conference

Yusuke Imayoshi, Shuji Ohsaki, Hideya Nakamura, Satoru Watano

Compaction Simulation Forum 2024  2024.06 

DEM analysis of compression process with the elastoplastic particles International conference

Shuji Ohsaki, Takeru Yano, Hideya Nakamura, Satoru Watano

Compaction Simulation Forum 2024  2024.06 

湿潤粉体流れの DEM シミュレーションにおける液架橋力モデル実装方法の基礎的検討 Domestic conference

大津 智隆,仲村 英也,大崎 修司,綿野 哲

粉体工学会2024年度春期研究発表会  2024.05 

[Invited] Ultra-fast computing method for granular flow in powder mixing process Invited Domestic conference

Hideya Nakamura, Naoki Kishida, Shota Yokokawa, Shuji Ohsaki, Satoru Watano

2024.05 

DEM simulations of elastoplastic powder compression process of bimodal powders with different plasticities Domestic conference

Shuji Ohsaki, Takeru Yano, Hideya Nakamura, Satoru Watano

2024.05 

数値解析を用いたシクロデキストリン型MOF粒子の複数薬物キャリア能の評価 Domestic conference

大橋 歩実,大崎 修司,仲村 英也,綿野 哲

粉体工学会2024年度春期研究発表会  2024.05 

Development of innovative high performance all solid-state battery by dry method

Grant-in-Aid for Scientific Research(B)  2024

Aggregate Formation of Soft Porous Materials Using Fine Particles Adhesion

Grant-in-Aid for Early-Career Scientists  2024

革新的な乾式法による高性能全固体電池の創製

Grant-in-Aid for Scientific Research(B)  2023

全固体リチウムイオン電池の電極緻密化機構の解明

ドイツとの国際共同研究プログラム（JRP-LEAD with DFG）  2022.12

微粒子の付着性を利用した凝集体形成による特異多孔性材料の設計

Grant-in-Aid for Early-Career Scientists  2022

体積膨張するソフト多孔性結晶の噴霧乾燥法における凝集体の構造制御と形成機構の解明

Grant-in-Aid for Early-Career Scientists  2019

次世代リチウムイオン電池の革新的な合成プロセスの創出

Grant-in-Aid for Scientific Research(B)  2018

物質化学生命系特別研究第2

2025   Intensive lecture   Graduate school

物質化学生命系特別研究

2025   Intensive lecture   Graduate school

物質化学生命系特別演習

2025   Intensive lecture   Graduate school

基礎化学実験

2025   Weekly class   Undergraduate

物質化学生命系特別演習第1

2025   Intensive lecture   Graduate school

物質化学生命系特別研究第1

2025   Intensive lecture   Graduate school

化学工学序論

2025   Weekly class   Undergraduate

化学工学卒業研究A

2025   Intensive lecture   Undergraduate

化学工学英語演習

2025   Intensive lecture   Undergraduate

物質化学生命系特別研究

2024   Intensive lecture   Graduate school

物質化学生命系特別演習第2

2024   Intensive lecture   Graduate school

物質化学生命系特別研究第2

2024   Intensive lecture   Graduate school

化学工学実験2

2024   Weekly class   Undergraduate

化学工学数学演習

2024   Weekly class   Undergraduate

物質化学生命系特別演習

2024   Intensive lecture   Graduate school

基礎化学実験

2024   Weekly class   Graduate school

物質化学生命系特別演習第1

2024   Intensive lecture   Graduate school

物質化学生命系特別研究第1

2024   Intensive lecture   Graduate school

プロセスシステム工学特論

2024   Weekly class   Graduate school

化学工学序論

2024   Weekly class   Undergraduate

プロセス制御工学

2024   Weekly class   Undergraduate

化工物理化学

2024   Weekly class   Undergraduate

化学工学実験II

2023   Weekly class   Undergraduate

プロセスシステム工学特論

2023   Weekly class   Graduate school

工学研究の最先端

2023   Intensive lecture   Graduate school

プロセス制御工学

2023   Weekly class   Undergraduate

化工物理化学

2023   Weekly class   Undergraduate